journal article·2022-12Open access

On the corrosion cracking of austenitic stainless steel in molten solar salt: Experiments and modeling

Heng Li, Xiaowei Wang, Xiucheng Feng, Xinyu Yang, Jianqun Tang, Jianming Gong, Seán B. Leen

Abstract

The mechanical behaviors of 304 and 316 L steels was investigated in air and in solar salt with different contents of chloride impurity under slow strain rate tensile (SSRT) tests using a novel experimental approach at 565 °C. Results show that the yield strength (YS) and ultimate tensile strength (UTS) are negligibly affected by the molten salt corrosion whereas the ductility decreases with increasing contents of chloride. Corrosion cracks initiate and propagate along the grain boundary due to its higher corrosion rate and incremental oxide rupture. Moreover, a damage model that captures the corrosion and chloride effects is proposed and validated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Environmental cost of natural resources utilization and economic growth: can China shift some burden through globalization for sustainable development?10.1002/sd.2116 ↗
2. The imperativeness of environmental quality in the United States transportation sector amidst biomass-fossil energy consumption and growth10.1016/j.jclepro.2020.124863 ↗
3. Dynamic modeling and behavior of parabolic trough concentrated solar power system under cloudy conditions10.1016/j.energy.2019.03.100 ↗
4. Materials corrosion for thermal energy storage systems in concentrated solar power plants10.1016/j.rser.2018.01.010 ↗
5. Kearney · Assessment of a Molten Salt Heat Transfer Fluid in a Parabolic Trough Solar Field · 2003 · 125 · 170
6. Two-tank molten salt storage for parabolic trough solar power plants10.1016/S0360-5442(03)00193-2 ↗
7. Engineering aspects of a molten salt heat transfer fluid in a trough solar field10.1016/S0360-5442(03)00191-9 ↗
8. The thermal stability of molten nitrite/nitrates salt for solar thermal energy storage in different atmospheres10.1016/j.solener.2012.05.025 ↗
9. Corrosion mechanisms in molten salt thermal energy storage for concentrating solar power10.1016/j.rser.2019.109328 ↗
10. Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies10.1016/j.rser.2015.09.026 ↗
11. Corrosion of mild steel in molten sodium nitrate–potassium nitrate eutectic10.1179/bcj.1976.11.1.44 ↗
12. Molten nitrate salts at 600 and 680°C: thermophysical property changes and corrosion of high-temperature nickel alloys10.1016/j.solener.2014.01.028 ↗
13. High-temperature and corrosion behavior of nitrate nitrite molten salt mixtures regarding their application in concentrating solar power plants10.1016/j.egypro.2015.03.071 ↗
14. Corrosion behavior of Incoloy 800 in molten nitrate salt
15. Inspection and structural health monitoring techniques for concentrated solar power plants10.1016/j.renene.2015.07.090 ↗
16. Studies on localized electrochemical activity of 304L SS-Zr-4 dissimilar joints using alternating current scanning electrochemical microscopy10.1016/j.apsusc.2021.151958 ↗
17. Nitrate/nitrite chemistry in sodium nitrate-potassium nitrate melts
18. Solubility and detection (down to 30 ppb) of oxygen in molten alkali nitrates[J]10.1016/S0022-0728(72)80347-4 ↗
19. Hydrogen half-ceils in molten salts. A potentiometric investigation of the systems (Pt or du) H 2 O/H2, OH- in fused alkali nitrates10.1007/BF00616544 ↗
20. High-temperature corrosion performance of austenitic stainless steels type AISI 316L and AISI 321H, in molten Solar Salt10.1016/j.solener.2018.11.019 ↗
21. Impact of Solar Salt aging on corrosion of martensitic and austenitic steel for concentrating solar power plants10.1016/j.solmat.2019.110162 ↗
22. Study of corrosion resistance of stainless steel AISI430 coated by slurry aluminizing in molten nitrate salt10.1016/j.matpr.2017.10.150 ↗
23. Trent · 2016 · vol. 1734
24. Corrosion behavior of stainless and low-chromium steels and IN625 in molten nitrate salts at 600 °C10.1016/j.solmat.2015.08.011 ↗
25. High temperature corrosion beneath nitrate melts10.1002/maco.201307076 ↗
26. Corrosion of iron stainless steels in molten nitrate salt10.1016/j.egypro.2014.03.095 ↗
27. Molten salt corrosion of stainless steels and low-Cr steel in CSP plants10.1007/s11085-012-9310-x ↗
28. Electrochemical study on the corrosion behaviors of 316 SS in HITEC molten salt at different temperatures10.1016/j.solmat.2018.06.044 ↗
29. Bradshaw · 2010
30. Study of corrosion by Dynamic Gravimetric Analysis (DGA) methodology. Influence of chloride content in solar salt10.1016/j.solmat.2016.07.027 ↗
31. High temperature corrosion in molten solar salt: the role of chloride impurities10.1002/maco.201609300 ↗
32. Goods · 1994
33. Effect of chloride impurity on corrosion kinetics of stainless steels in molten solar salt for CSP application: Experiments and modeling10.1007/s11085-021-10025-y ↗
34. Corrosion and electrochemical investigations for stainless steels in molten Solar Salt: the influence of chloride impurity10.1016/j.est.2021.102675 ↗
35. Material aspects of Solar Salt for sensible heat storage10.1016/j.apenergy.2013.04.072 ↗
36. Mechanical properties of a low alloy steel in a molten nitrate salt environment10.1007/BF02811673 ↗
37. The effect of a molten nitrate salt environment on the mechanical properties of INCOLOY alloy 80010.1007/BF02833504 ↗
38. Constant extension rate testing of IN625LCF in molten nitrate salt10.1016/S0010-938X(98)00175-9 ↗
39. Creep and the Incoloy Alloy800 in molten nitrate salts10.1007/BF02833528 ↗
40. Kaae · 1982
41. Influence of long term sodium exposure on the corrosion and tensile properties of AISI type 316LN stainless steel and modified 9Cr-1Mo steel10.1016/j.jnucmat.2022.153830 ↗
42. Thermomechanical testing under operating conditions of A516Gr70 used for CSP storage tanks10.1016/j.solmat.2017.09.029 ↗
43. Some aspects of pitting corrosion susceptibility of As‐welded and thermally aged nitrogen‐alloyed 316SS weld metal10.1002/maco.202112995 ↗
44. M. Navas, E. Gonzalez, C. Prieto, T. Fluri, J. Preussner, A. Gomes, T. C. Diamantino, WHite Paper on “Compatibility of Structural Materials with Storage Materials for TES System”.
45. Corrosion evaluation by electrochemical real-time tracking of VM12 martensitic steel in a ternary molten salt mixture with lithium nitrates for CSP plants10.1016/j.solmat.2021.111302 ↗
46. Evaluation of flow accelerated corrosion and mechanical performance of martensitic steel T91 for a ternary mixture of molten salts for CSP plants10.1016/j.solmat.2022.111623 ↗
47. A simple model for slow strain rate and constant load corrosion tests of austenitic stainless steel in acid aqueous solution containing sodium chloride10.1016/j.corsci.2008.07.020 ↗
48. Corrosion monitoring assessment on lithium nitrate molten salts as thermal energy storage material applied to CSP plants10.1007/s11085-020-09997-0 ↗
49. Final test and evaluation results from the solar two Project
50. Molten salt corrosion mechanisms of nitrate based thermal energy storage materials for concentrated solar power plants: a review10.1016/j.solmat.2019.02.012 ↗
51. Current energy mix and techno-economic analysis of concentrating solar power (CSP) technologies in Malaysia10.1016/j.renene.2019.03.107 ↗
52. ASTM, ASTM Standard: ASTM E8/E8M - 15a. , Standard Test Methods for Tension Testing of Metallic Materials.
53. Materials selection for thermal energy storage systems in parabolic trough collector solar facilities using high chloride content nitrate salts10.1016/j.solmat.2017.01.028 ↗
54. Grain-boundary diffusion in metals10.1179/imr.1983.28.1.65 ↗
55. Volume and grain boundary diffusion of chromium in Ni-base Ni–Cr–Fe alloys10.2320/matertrans.44.40 ↗
56. Impacts of applied stresses on high temperature corrosion behavior of HR3C in molten salt10.1007/s11085-014-9522-3 ↗
57. Impact of dislocations and dislocation substructures on molten salt corrosion of alloys under plasticity-imparting conditions10.1016/j.corsci.2020.108915 ↗
58. Dunne · 2005
59. The influence of chloride content, PH, and temperature of test solution on the occurrence of stress corrosion cracking with austenitic stainless steel10.1016/0010-938X(77)90069-5 ↗