On the anticorrosion mechanism of molten salts based nanofluids
Source abstract
Abstract
Abstract With renewables as the main candidate for future energy sources, efficient energy storage is considered a key to unlock its full potential. In this context, thermal energy storage (TES), particularly molten salt-based TES, is considered as an efficient, simple and a low-cost option. One of the main drawbacks for this technology is the corrosion of vessels storing the salt at elevated temperatures. Recently, the addition of nanoparticles has been reported to be able to mitigate the corrosivity of molten salts by several independent groups. However, no convincing explanation has been established so far as to why such behaviour takes place. In this work, we attempt to give a new insight into anticorrosion performance of molten salts dopped with nanoparticles (molten salts nanofluids) both experimentally and through Molecular Dynamic simulations. XPS-depth profiling, SEM-EDX and XRD experiments together with macroscopic and atomistic modelling were used in this work and the results suggest that the diffusion of nanoparticles into construction materials at high temperatures is one of the corrosion mitigation mechanisms of molten salts nanofluids. This new finding allows the explanation of some of the reported corrosion results and hence paves the way for a new anticorrosion strategy for molten salts and other high-temperature applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Nanofluid Flow and Heat Transfer · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. 2019 · 1
2. Nanofluids based on molten carbonate salts for high-temperature thermal energy storage: thermophysical properties, stability, compatibility and life cycle analysis10.1016/j.solmat.2020.110838 ↗
3. Mainstreaming commercial CSP systems: a technology review10.1016/j.renene.2019.03.049 ↗
4. Technical challenges and opportunities for concentrating solar power with thermal energy storage10.1115/1.4024143 ↗
5. Thermal energy storage technologies and systems for concentrating solar power plants10.1016/j.pecs.2013.02.001 ↗
6. Molten salt as a heat transfer fluid in a linear fresnel collector - commercial application backed by demonstration10.1016/j.egypro.2015.03.079 ↗
7. Corrosion of alloys and metals by molten nitrates
8. Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies10.1016/j.rser.2015.09.026 ↗
9. Mehos · 2017 · 1
10. Comparison of corrosion performance of grade 316 and grade 347H stainless steels in molten nitrate salt10.1063/1.4949258 ↗
11. Corrosion of stainless steels and carbon steel by molten mixtures of commercial nitrate salts10.1361/10599490417542 ↗
12. Corrosion properties of a ternary nitrate/nitrite molten salt inconcentrated solar technology10.1016/j.renene.2015.01.072 ↗
13. The effect of humidity, impurities and initial state on the corrosion of carbon and stainless steels in molten HitecXL salt for CSP application10.1016/j.solmat.2017.08.026 ↗
14. Evaluation of corrosion resistance of A516 Steel in a molten nitrate salt mixture using a pilot plant facility for application in CSP plants10.1016/j.solmat.2016.12.002 ↗
15. Investigation on static and dynamic corrosion behaviors of thermal energy transfer and storage system materials by molten salts in concentrating solar power plants
16. Experimental research of high temperature dynamic corrosion characteristic of stainless steels in nitrate eutectic molten salt10.1016/j.solener.2020.09.034 ↗
17. Dynamic corrosion behavior of 316L stainless steel in quaternary nitrate-nitrite salts under different flow rates10.1016/j.solmat.2020.110821 ↗
18. Materials corrosion for thermal energy storage systems in concentrated solar power plants10.1016/j.rser.2018.01.010 ↗
19. Molten salt corrosion mechanisms of nitrate based thermal energy storage materials for concentrated solar power plants: a review10.1016/j.solmat.2019.02.012 ↗
20. Corrosion mechanisms in molten salt thermal energy storage for concentrating solar power10.1016/j.rser.2019.109328 ↗
21. Slurry aluminizing: a solution for molten nitrate salt corrosion in concentrated solar power plants10.1016/j.solmat.2015.11.024 ↗
22. Corrosion performance of slurry aluminide coatings in molten NaCl–KCl10.1016/j.solmat.2021.110974 ↗
23. Corrosion resistance of protective coatings against molten nitrate salts for thermal energy storage and their environmental impact in CSP technology10.1016/j.solener.2018.10.083 ↗
24. Electrochemical Performance of Ni20Cr coatings applied by combustion powder spray in ZNCL 2-KCL molten salts10.1016/S1452-3981(23)13401-8 ↗
25. Corrosion resistance of alumina-forming alloys against molten chlorides for energy production. I: pre-oxidation treatment and isothermal corrosion tests
26. Corrosion resistance of alumina forming alloys against molten chlorides for energy production. II: electrochemical impedance spectroscopy under thermal cycling conditions
27. Molten chloride salts for next generation concentrated solar power plants: mitigation strategies against corrosion of structural materials10.1016/j.solmat.2018.12.020 ↗
28. Corrosion resistance of MCrAlX coatings in a molten chloride for thermal storage in concentrating solar power applications10.1038/s41529-017-0012-3 ↗
29. Hot corrosion behavior of commercial alloys in thermal energy storage material of molten MgCl2/KCl/NaCl under inert atmosphere10.1016/j.solmat.2018.04.025 ↗
30. A simple method for the inhibition of the corrosion of carbon steel by molten nitrate salt for thermal storage in concentrating solar power applications10.1038/s41529-018-0055-0 ↗
31. Spray-graphitization as a protection method against corrosion by molten nitrate salts and molten salts based nanofluids for thermal energy storage applications10.1016/j.solmat.2019.110024 ↗
32. Graphitization as efficient inhibitor of the carbon steel corrosion by molten binary nitrate salt for thermal energy storage at concentrated solar power10.1016/j.solmat.2019.110172 ↗
33. Inhibiting hot corrosion of molten Li2CO3-Na2CO3-K2CO3 salt through graphitization of construction materials for concentrated solar power10.1016/j.solmat.2020.110650 ↗
34. Corrosion aspects of molten nitrate salt-based nanofluids for thermal energy storage applications10.1016/j.solener.2019.07.050 ↗
35. Nanoparticles as a high-temperature anticorrosion additive to molten nitrate salts for concentrated solar power10.1016/j.solmat.2019.110171 ↗
36. Unexpected effect of nanoparticles doping on the corrosivity of molten nitrate salt for thermal energy storage10.1016/j.solmat.2018.01.002 ↗
37. High temperature corrosion behavior on molten nitrate salt-based nanofluids for CSP plants10.1016/j.renene.2018.07.018 ↗
38. Iyer · 2011
39. Molten salt-carbon nanotube thermal energy storage for concentrating
40. One-step synthesis of molten salt nanofluid for thermal energy storage application – a comprehensive analysis on thermophysical property, corrosion behavior, and economic benefit10.1016/j.est.2021.102278 ↗
41. Molten salts in the light of corrosion mitigation strategies and embedded with nanoparticles to enhance the thermophysical properties for CSP plants10.1016/j.solmat.2020.110768 ↗
42. Compatibility of container materials for Concentrated Solar Power with a solar salt and alumina based nanofluid: a study under dynamic conditions10.1016/j.renene.2019.06.145 ↗
43. Corrosion aspects of molten nitrate salt-based nanofluids for thermal energy storage applications10.1016/j.solener.2019.07.050 ↗
44. Nanofluids based on molten carbonate salts for high-temperature thermal energy storage: thermophysical properties, stability, compatibility and life cycle analysis10.1016/j.solmat.2020.110838 ↗
45. Nanoparticles as a high-temperature anticorrosion additive to molten nitrate salts for concentrated solar power10.1016/j.solmat.2019.110171 ↗
46. Spray-graphitization as a protection method against corrosion by molten nitrate salts and molten salts based nanofluids for thermal energy storage applications10.1016/j.solmat.2019.110024 ↗
47. Molecular dynamics simulation on the tribology properties of two hard nanoparticles (diamond and silicon dioxide) confined by two iron blocks10.1016/j.triboint.2015.04.043 ↗
48. Interatomic potential for Si-O systems using Tersoff parameterization10.1016/j.commatsci.2006.06.010 ↗
49. Development of new interatomic potentials appropriate for crystalline and liquid iron10.1080/14786430310001613264 ↗
50. Ternary Fe-Cu-Ni many-body potential to model reactor pressure vessel steels: first validation by simulated thermal annealing10.1080/14786430903299824 ↗
51. Seader · 2016