journal article·2021-09Open access

In depth analysis of transfer length method application on passivated contacts under illumination

Léo Basset, Wilfried Favre, Olivier Bonino, Julien Sudre, Gilles Ménard, Jean-Pierre Vilcot

Abstract

Abstract Although solar cells operate under illumination, most electrical characterization methods are carried out in darkness, which implies some bias. In this work, we study the influence of light on the contact resistivity of the electron and hole contacts of a silicon heterojunction (SHJ) cell using the transfer length method (TLM) method in order to determine them in conditions representative of an operating solar cell at maximum power point. A specific fabrication process has been developed to preserve the passivation level. Therefore, we first focus on the patterning approach used for processing, and show that we can fabricate TLM samples with good passivation properties. Using simulations, we also discuss on the influence of inhomogeneities in the excess minority carrier spatial concentration on the TLM analysis. These inhomogeneities, due to shading, local damages in the passivation or to carrier drift under bias voltage make the measurement complicated to carry out without significant error. Our results suggest that the measurement is more precise in darkness and at very high injection levels, under rear illumination and a low voltage bias.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Exceeding conversion efficiency of 26% by heterojunction interdigitated back contact solar cell with thin film Si technology10.1016/j.solmat.2017.06.024 ↗
2. Impact of carrier recombination on fill factor for large area heterojunction crystalline silicon solar cell with 25.1% efficiency10.1063/1.4937224 ↗
3. W. Favre, D. Munoz, C. Roux, First European 25% Efficient Large Area Silicon Solar Cell: Path for European Premium PV Manufacturing Is Open, (n.d.).
4. 25.11% efficiency silicon heterojunction solar cell with low deposition rate intrinsic amorphous silicon buffer layers10.1016/j.solmat.2020.110643 ↗
5. Current losses at the front of silicon heterojunction solar cells10.1109/JPHOTOV.2011.2174967 ↗
6. Heterojunction and passivated contacts: a simple method to extract both n/tco and p/tco contacts resistivity10.1016/j.egypro.2016.07.104 ↗
7. Series resistance breakdown of silicon heterojunction solar cells produced on CEA-INES pilot line, 35th
8. Analysis of series resistance losses in a-Si:H/c-Si heterojunction solar cells10.1109/JPHOTOV.2014.2328575 ↗
9. Analysis of a-Si:H/TCO contact resistance for the Si heterojunction back-contact solar cell10.1016/j.solmat.2013.06.026 ↗
10. Contact resistance on diffused resistors
11. Low-resistivity screen-printed contacts on indium tin oxide layers for silicon solar cells with passivating contacts10.1109/JPHOTOV.2018.2859768 ↗
12. Lateral transport in silicon solar cells10.1063/1.5139416 ↗
13. Contact resistance and contact resistivity10.1149/1.2404240 ↗
14. Contact resistivity of the p-type Amorphous silicon hole contact in silicon heterojunction solar cells
15. Detailed investigation of TLM contact resistance measurements on crystalline silicon solar cells10.1016/j.solener.2017.05.015 ↗
16. Analytical theory for extracting specific contact resistances of thick samples from the transmission line method10.1109/LED.2013.2290602 ↗
17. Danel · 2017
18. Patterning of transparent conducting oxide thin films by wet etching for a-Si: H TFT-LCDs10.1007/BF02657158 ↗
19. Selective wet and dry etching of hydrogenated amorphous silicon and related materials10.1149/1.2096204 ↗
20. A unified mobility model for device simulation - I. Model equations and concentration dependence10.1016/0038-1101(92)90325-7 ↗
21. A unified mobility model for device simulation -II. temperature dependence of carrier mobility and lifetime10.1016/0038-1101(92)90326-8 ↗
22. Statistics of the recombinations of holes and electrons10.1103/PhysRev.87.835 ↗
23. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
24. Reassessment of intrinsic lifetime limit in n-type crystalline silicon and implication on maximum solar cell efficiency10.1016/j.solmat.2018.06.029 ↗
25. Characterization of a-Si:H∕c-Si interfaces by effective-lifetime measurements10.1063/1.2128047 ↗
26. Senaud · 2020
27. An exact field solution of contact resistance and comparison with the transmission line model10.1063/1.4878841 ↗
28. Understanding of the influence of the surface defectivity on silicon heterojunction cell performance
29. Improved defect-pool model for charged defects in amorphous silicon10.1103/PhysRevB.48.10815 ↗
30. Band bending and determination of band offsets in amorphous/crystalline silicon heterostructures from planar conductance measurements10.1063/1.4769736 ↗
31. Numerical modeling of abrupt heterojunctions using a thermionic-field emission boundary condition10.1016/0038-1101(93)90083-3 ↗
32. Generalized analysis of quasi-steady-state and quasi-transient measurements of carrier lifetimes in semiconductors10.1063/1.371633 ↗
33. Quality control method based on photoluminescence imaging for the performance prediction of c-Si/a-Si:H heterojunction solar cells in industrial production lines10.1016/j.solmat.2015.09.009 ↗
34. Understanding of the influence of localized surface defectivity properties on the performances of silicon heterojunction cells10.1002/pip.3330 ↗
35. Optimization of tunnel-junction IBC solar cells based on a series resistance model10.1016/j.solmat.2019.110036 ↗
36. R.H. Cox, H. Strack, OHMIC CONTACTS FOR GaAs DEVICES, (n.d.) vol. 8.