Heterojunction post-heat treatment process driving high efficiency for Cu2ZnSnS4 solar cell
Source abstract
Abstract
Abstract The quality of Cu2ZnSnS4 (CZTS) absorber layer, Mo/CZTS interface and heterojunction CZTS/CdS are the most important factors directly affecting the performance of CZTS solar cells. On the base of high quality absorber layer and back contact interface, the effects of post-heat treatment (PHT) process of CZTS/CdS on the quality of heterojunction and device performance have been comprehensively investigated. The PHT process can promote the elements in the heterojunction region interdiffuse between absorber and buffer layer, i.e., more Cd elements diffuse to CZTS, and Zn, Cu elements diffuse to CdS. Consequently, the elements interdiffusion affects the chemical composition of the absorber layer surface and the band alignment of the heterojunction. After applying the PHT process, the surface of CZTS becomes Cu-poorer in comparison to the CZTS bulk. Due to the diffusion of Cd2+into the CZTS layer, the free carrier density is increased. In addition, PHT process can also promote the recrystallization of CdS and thus greatly improve the crystallization quality of CdS. Owing to the more favorable band alignment at the CZTS/CdS interface as well as better crystallinity of CdS, higher quality heterojunction was obtained. Finally, at the optimized PHT temperature of 275 °C, a pure CZTS solar cell with active area efficiency of 9.75% (total area efficiency: 8.90%) has been fabricated. Based on the application of PHT process, reducing the deep level defects in CZTS bulk is expected to further improve the device performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Device postannealing enabling over 12% efficient solution-processed Cu2ZnSnS4 solar cells with Cd2+ substitution10.1002/adma.202000121 ↗
2. Effect of solid-H2S gas reactions on CZTSSe thin film growth and photovoltaic properties of a 12.62% efficiency device10.1039/C9TA08310C ↗
3. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
4. Sn4+ precursor enables 12.4% efficient kesterite solar cell from DMSO solution with open circuit voltage deficit below 0.30 V10.1007/s40843-020-1408-x ↗
5. Defect control for 12.5% efficiency Cu2ZnSnSe4 kesterite thin-film solar cells by engineering of local chemical environment10.1002/adma.202005268 ↗
6. Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment10.1038/s41560-018-0206-0 ↗
7. Synthesis of Cu2ZnSnS4 nanocrystal ink and its use for solar cells10.1021/ja904981r ↗
8. Development of a selective chemical etch to improve the conversion efficiency of Zn-rich Cu2ZnSnS4 solar cells10.1021/ja301373e ↗
9. The effects of SnS2 secondary phases on Cu2ZnSnS4 solar cells: a promising mechanical exfoliation method for its removal10.1039/C7TA08242H ↗
10. An efficient Li+-doping strategy to optimize the band alignment of a Cu2ZnSn(S,Se)4/CdS interface by a Se&LiF co-selenization process10.1039/D0TA07268K ↗
11. Revealing the role of potassium treatment in CZTSSe thin film solar cells10.1021/acs.chemmater.7b00418 ↗
12. Efficiency enhancement of Cu2ZnSn(S,Se)4 solar cells via alkali metals doping10.1002/aenm.201502386 ↗
13. Effect of Na doping on the performance and the band alignment of CZTS/CdS thin film solar cell10.1016/j.solener.2020.02.088 ↗
14. Engineering of interface band bending and defects elimination via a Ag-graded active layer for efficient (Cu,Ag)2ZnSn(S,Se)4 solar cells10.1039/C7EE01405H ↗
15. Beyond 11% efficient sulfide kesterite Cu2ZnxCd1–xSnS4 solar cell: effects of cadmium alloying10.1021/acsenergylett.7b00129 ↗
16. Substitution of Zn in Earth‐Abundant Cu2ZnSn(S,Se)4 based thin film solar cells – a status review10.1016/j.solmat.2018.05.003 ↗
17. Synergistic effects of double cation substitution in solution-processed CZTS solar cells with over 10% efficiency10.1002/aenm.201802540 ↗
18. Synergistic effect of Mn on bandgap fluctuations and surface electrical characteristics in Ag-based Cu2ZnSn(S,Se)4 solar cells10.1039/D0TA10103F ↗
19. Ag, Ge dual-gradient substitution for low-energy loss and high-efficiency kesterite solar cells10.1039/D0TA06318E ↗
20. Atom-probe tomographic study of interfaces of Cu2ZnSnS4 photovoltaic cells10.1063/1.4894858 ↗
21. Cu2ZnSnS4 photovoltaic cell with improved efficiency fabricated by high-temperature annealing after CdS buffer-layer deposition10.1002/pip.2837 ↗
22. Interface engineering of CdS/CZTSSe heterojunctions for enhancing the Cu2ZnSn(S,Se)4 solar cell efficiency10.1016/j.mtener.2019.05.015 ↗
23. Improved interfacial properties of electrodeposited Cu2ZnSn(S,Se)4 thin‐film solar cells by a facile post‐heat treatment process10.1002/pip.3332 ↗
24. Mechanism on the modified sulfurization process for growing large-grained Cu2ZnSnS4 thin films10.1016/j.solener.2019.12.063 ↗
25. Improving the efficiency of Cu2ZnSnS4 solar cells by promoting the homogeneous distribution of Sn element10.1016/j.apsusc.2020.147160 ↗
26. Modification of back contact in Cu2ZnSnS4 solar cell by inserting Al-doped ZnO intermediate layer10.1021/acsami.0c18799 ↗
27. Effect of metal layer stacking order on the growth of Cu2ZnSnS4 thin films10.1016/j.apsusc.2016.11.001 ↗
28. Cation substitution of solution-processed Cu2ZnSnS4 thin film solar cell with over 9% efficiency10.1002/aenm.201500682 ↗
29. Optical properties of reactively sputtered Cu2ZnSnS4 solar absorbers determined by spectroscopic ellipsometry and spectrophotometry10.1016/j.solmat.2016.01.014 ↗
30. Cu out-diffusion in kesterites—a transmission electron microscopy specimen preparation artifact10.1063/1.4790282 ↗
31. Enhancing the Cu2ZnSnS4 solar cell efficiency by back contact modification: inserting a thin TiB2 intermediate layer at Cu2ZnSnS4/Mo interface
32. Complex surface chemistry of kesterites: Cu/Zn reordering after low temperature postdeposition annealing and its role in high performance devices10.1021/acs.chemmater.5b01473 ↗
33. High voltage Cu2ZnSnS4 submodules by hybrid buffer layer
34. Intermixing at the absorber-buffer layer interface in thin-film solar cells: the electronic effects of point defects in Cu(In,Ga)(Se,S)2 and Cu2ZnSn(Se,S)4 devices10.1063/1.4892407 ↗
35. Stability and electronic structure of Cu2ZnSnS4 surfaces: first-principles study10.1103/PhysRevB.88.045427 ↗
36. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
37. Over 9% efficient kesterite Cu2ZnSnS4 solar cell fabricated by using Zn1-xCdxS buffer layer10.1002/aenm.201600046 ↗
38. Defects and surface electrical property transformation induced by elemental interdiffusion at the p-n heterojunction via high-temperature annealing10.1021/acsami.1c00096 ↗
39. Optimization of post-deposition annealing in Cu2ZnSnS4 thin film solar cells and its impact on device performance10.1016/j.solmat.2017.05.065 ↗
40. Identifying the origin of the Voc deficit of kesterite solar cells from the two grain growth mechanisms induced by Sn2+ and Sn4+ precursors in DMSO solution10.1039/D0EE03702H ↗
41. Boosting the efficiency of pure sulfide CZTS solar cells using the In/Cd-based hybrid buffers10.1016/j.solmat.2015.10.019 ↗
42. Beyond 10% efficient Cu2ZnSn(S,Se)4 solar cells: effects of the introduction of SnS powder during selenization process
43. Direct measurement of band offset at the interface between CdS and Cu2ZnSnS4 using hard X-ray photoelectron spectroscopy10.1063/1.4850235 ↗
44. Band alignments of different buffer layers (CdS, Zn(O,S), and In2S3) on Cu2ZnSnS410.1063/1.4873715 ↗