Effective gettering of in-situ phosphorus-doped polysilicon passivating contact prepared using plasma-enhanced chemical-vapor deposition technique
Source abstract
Abstract
Abstract In this work, we investigated the gettering of the in-situ phosphorus-doped polysilicon passivating contact that was realized through plasma-enhanced chemical-vapor deposition (PECVD) technology. Interstitial iron (Fei) induced artificially was used as the marker for estimating gettering effectiveness. The factors on gettering effectiveness are studied, including the fabrication procedures and the structures of the polysilicon passivating contact. The research suggests that the heavily phosphorus-doped polysilicon layer serves as the gettering pool for iron atoms. We found that the measures including raising the annealing temperature, extending the annealing time, increasing the thickness and doping concentration of polysilicon, and lowering the SiOx thickness are helping to improve the gettering effectiveness. Moreover, the subsequent hydrogenation promotes the lifetime and implied open-circuit voltage by reducing Shockley-Read-Hall (SRH) recombination. The advantage of the polysilicon passivating contact is the significant effect on the improvement in bulk lifetime, so that the low-quality silicon wafer has the chance to be used for solar cell fabrication with notably improved performance by using the excellent gettering and surface passivation of the polysilicon passivating contact. In summary, this work confirmed that the PECVD-prepared in-situ doped polysilicon passivating contact is an effective process to remove more than 99.99% bulk Fe contamination with an optimal formation procedure, which was essential for the industrial manufacture for silicon solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. A passivated rear contact for high-efficiency n-type silicon solar cells enabling high Vocs and FF> 82%
2. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
3. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
4. Recombination behavior and contact resistance of n+ and p+ poly-crystalline Si/mono-crystalline Si junctions10.1016/j.solmat.2014.06.003 ↗
5. Implementation of N+ and P+ polo junctions on front and rear side of double-side contacted industrial silicon solar cells
6. Ion implantation for poly-Si passivated back-junction back-contacted solar cells10.1109/JPHOTOV.2014.2382975 ↗
7. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
8. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
9. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
10. Improvement of the SRH bulk lifetime upon formation of n-type POLO junctions for 25% efficient Si solar cells10.1016/j.solmat.2017.05.055 ↗
11. An industrially viable TOPCon structure with both ultra-thin SiOx and n+-poly-Si processed by PECVD for p-type c-Si solar cells10.1016/j.solmat.2019.109926 ↗
12. Effective impurity gettering by phosphorus- and boron-diffused polysilicon passivating contacts for silicon solar cells10.1016/j.solmat.2017.11.004 ↗
13. Direct observation of the impurity gettering layers in polysilicon-based passivating contacts for silicon solar cells10.1021/acsaem.8b00367 ↗
14. Impurity gettering effect of atomic layer deposited aluminium oxide films on silicon wafers10.1063/1.4983380 ↗
15. Low temperature iron gettering by grown-in defects in p-type Czochralski silicon10.1016/j.spmi.2016.03.006 ↗
16. A fast, preparation‐free method to detect iron in silicon10.1063/1.345063 ↗
17. Formation rates of iron-acceptor pairs in crystalline silicon10.1063/1.2102071 ↗
18. Iron detection in crystalline silicon by carrier lifetime measurements for arbitrary injection and doping10.1063/1.1637136 ↗
19. Macdonald · 2006
20. Mechanisms of transition-metal gettering in silicon10.1063/1.1289273 ↗
21. Effect of silicon oxide thickness on polysilicon based passivated contacts for high-efficiency crystalline silicon solar cells10.1016/j.solmat.2018.05.011 ↗
22. A strong-oxidizing mixed acid derived high-quality silicon oxide tunneling layer for polysilicon passivated contact silicon solar cell10.1016/j.solmat.2018.09.001 ↗
23. Huang · 2019
24. Phosphorus and boron diffusion gettering of iron in monocrystalline silicon10.1063/1.3582086 ↗
25. Gettering in silicon photovoltaics: current state and future perspectives10.1002/pssa.200664516 ↗
26. Carrier transport through the ultrathin silicon-oxide layer in tunnel oxide passivated contact (TOPCon) c-Si solar cells10.1016/j.solmat.2018.07.025 ↗
27. Characterization of SiNx:H thin film as a hydrogen passivation layer for silicon solar cells with passivated contacts10.1016/j.tsf.2019.02.016 ↗
28. Improved photoelectrochemical hydrogen evolution using a defect-passivated Al2O3 thin film on p-Si10.1016/j.tsf.2016.09.020 ↗
29. Effect of pressure on surface passivation of silicon solar cell by forming gas annealing10.1016/j.mssp.2004.09.101 ↗
30. Review of advanced hydrogen passivation for high efficient crystalline silicon solar cells10.1016/j.mssp.2018.01.019 ↗
31. Modeling phosphorus diffusion gettering of iron in single crystal silicon10.1063/1.3068337 ↗