journal article·2016-12

21.0%-efficient screen-printed n-PERT back-junction silicon solar cell with plasma-deposited boron diffusion source

Nadine Wehmeier, Anja Nowack, Bianca Lim, Till Brendemühl, Sarah Kajari-Schröder, Jan Schmidt, Rolf Brendel, Thorsten Dullweber

Publisher page

Abstract

Abstract The manufacturing process of Passivated Emitter and Rear Totally diffused (PERT) solar cells on n-type crystalline silicon is significantly simplified by applying multifunctional layer stacks acting as diffusion source, etching and diffusion barrier. We apply boron silicate glasses (BSG) capped with silicon nitride (SiNz) layers that are deposited by means of plasma enhanced chemical vapor deposition (PECVD). Optimum PECVD deposition parameters for the BSG layer such as the gas flow ratio of the precursor gases silane and diborane SiH4/B2H6=8% and the layer thickness of 40 nm result in a boron diffusion with saturation current density J0,B below 10 fA/cm2 applying an AlOx/SiNy passivation and firing. The PECVD BSG diffusion source is integrated into the n-type PERT back junction (BJ) solar cell process with screen-printed front and rear contacts. The only high temperature step is a POCl3 co-diffusion for the formation of the boron emitter from the PECVD BSG layer and for the formation of the phosphorus-doped front surface field (FSF). An independently confirmed energy conversion efficiency of 21.0% is achieved for a 156×156 mm2 large n-PERT BJ cell with this simplified process flow. This is the highest efficiency reported for a large-area co-diffused n-type PERT BJ solar cell using a PECVD BSG as diffusion source. For comparison, reference n-type PERT BJ cells with separate POCl3 and BBr3 diffusions reach an efficiency of 21.2% in our lab. A synergistic efficiency gain analysis (SEGA) for the co-diffused n-PERT BJ cell shows that the main possible efficiency gain of 1.1%abs. originates from recombination in the phosphorus-diffused front surface field while the PECVD BSG boron-doped emitter accounts for only 0.1%abs. efficiency gain. We evaluate the use of the PECVD BSG/SiNz stack as a rear side passivation as a replacement of the AlOx/SiNy stack in order to further simplify the process flow. We obtain J0,B values of 40 fA/cm2, an implied open-circuit voltage of 682 mV and a simulated n-PERT BJ cell efficiency of 21.1%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic Systems and Sustainability · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. (International) Technology Roadmap for Photovoltaic (ITRPV), Results 2015, Seventh edition, March 2016.
2. 〈http://www.pv-magazine.com/news/details/beitrag/trina-solar-sets-efficiency-record-with-c-si-cell_100022472/#axzz41q0kJmq5〉, (16.12.2015).
3. Light-induced degradation in crystalline silicon solar cells
4. T. Dullweber, C. Kranz, U. Baumann, R. Hesse, D. Walter, J. Schmidt, P. Altermatt, R. Brendel, Silicon wafer material options for highly efficient p-type PERC solar cells, in: Proceedings of the 39th IEEE PVSC, Tampa, FL, USA, 2013, pp. 3074–3078.10.1109/PVSC.2013.6745110 ↗
5. J. Schmidt, K. Bothe, R. Bock, C. Schmiga, R. Krain, R. Brendel, N-type silicon – the better material choice for industrial high-efficiency solar cells?, in: Proceedings of the 22nd EUPVSEC, 2007, pp. 998–1001.
6. A. Urueña, M. Aleman, E. Cornagliotti, A. Sharma, J. Deckers, M. Haslinger, L. Tous, R. Russell, J. John, Y. Yao, T. Söderström, F. Duerinckx, J. Szlufcik, Beyond 22% large area n-type silicon solar cells with front laser doping and a rear emitter, in: Proceedings of the 31th EUPVSEC, 2015, pp. 410–413.
7. V. Mertens, S. Bordihn, A. Mohr, K. Petter, J.W. Müller, D.J.W. Jeong, R. Hao, T. Ravi, 21.4% efficient fully screen printed n-type solar cell on epitaxially grown silicon wafers with built-in boron rear side emitter, in: Proceedings of the 31st EUPVSEC, 2015, pp. 1000–1002.
8. S. Bordihn et al., Status of industrial back junction n-type Si solar cell development, in: Proceedings of the 6th International Conference on Silicon Photovoltaics, Chambéry, France, 2016.
9. P. Rothhardt, S. Meier, K. Jiang, A. Wolf, D. Biro, 19.9% efficient bifacial n-type solar cell produced by co-diffusion-COBIN, in: Proceedings of the 29th EUPVSEC, 2014, pp. 653–655.
10. A. Frey, J. Engelhardt, S. Fritz, S. Gloger, G. Hahn, B. Terheiden, N-type bi-facial solar cells with boron emitters from doped PECVD layers, in: Proceedings of the 29th EUPVSEC, 2014, pp. 656–660.
11. R. Cabal, B. Grange, L. Bounaas, R. Monna, N. Plassat, E. Pihan, Y. Veschetti, 20% PERT technology adapted to n-type mono-like silicon: simplified process and narrowed cell efficiency distribution, in: Proceedings of the 29th EUPVSEC, 2014, pp. 648–652.
12. 21.0%-efficient co-diffused screen printed n-type silicon solar cell with rear-side boron emitter10.1002/pssr.201510393 ↗
13. Passivating boron silicate glasses for co-diffused high-efficiency n-type silicon solar cell application10.1063/1.4927667 ↗
14. APECVD BSG diffusion sources for simplified high-efficiency n-PERT BJ and BJBC solar cells
15. N. Wehmeier, G. Schraps, H. Wagner, B. Lim, N.-P. Harder, P.P. Altermatt, Boron-doped PECVD silicon oxides as diffusion sources for simplified high-efficiency solar cell fabrication, in: Proceedings of the 28th EUPVSEC, 2013, pp. 1980–1984.
16. 21.2%-efficient fineline-printed PERC solar cell with 5 busbar front grid10.1002/pssr.201409190 ↗
17. Loss analysis of n-type passivated emitter rear totally diffused back-junction silicon solar cells with efficiencies up to 21.2%10.1109/JPHOTOV.2016.2520211 ↗
18. D.E. Kane, R.M. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method, in: Proceedings of the 18th IEEE Photovoltaic Specialists Conference, 1985, pp. 578–583.
19. M.A. Kessler, T. Ohrdes, B. Wolpensinger, R. Bock, N.-P. Harder, Characterisation and implications of the boron rich layer resulting from open-tube liquid source BBr3 boron diffusion processes, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference, 2009.10.1109/PVSC.2009.5411365 ↗
20. Effective surface passivation of crystalline silicon using ultrathin Al2O3 films and Al2O3/SiNx stacks10.1002/pssr.200903272 ↗
21. Modeling solar cells with the dopant-diffused layers treated as conductive boundaries10.1002/pip.954 ↗
22. Quokka version 2: selective surface doping, luminescence modeling and data fitting10.1109/TED.2012.2231415 ↗
23. Prozessentwicklung & verlustanalysen für dünne monokristalline siliziumsolarzellen und deren prozessierung auf modullevel
24. Breakdown of the efficiency gap to 29% based on experimental input data and modelling