journal article·2016-01

Enhanced PEC characteristics of pre-annealed CuS film electrodes by metalloporphyrin/polymer matrices

Ahed Zyoud, Rana S. AlKerm, Rola S. Alkerm, Doa׳ H. Abdelhadi, DaeHoon Park, Mohammed H.S. Helal, Guy Campet, Reham W. Muthaffar, Hansang Kwon, Hikmat S. Hilal

Publisher page

Abstract

Abstract High conversion efficiency (η) values have been obtained from modified CuS film electrodes electrochemically deposited onto Glass/FTO. The modification involved pre-annealing the film followed by coating with tetra(-4-pyridyl)porphyrinato manganese (MnTPyP+) ions embedded inside a polyethylene (PE) matrix. The Glass/FTO/CuS/MnTPyP/PE electrodes exhibited enhanced photo-electrochemical (PEC) characteristics under solar simulated illumination (5.6 mW/cm−2) in aqueous media, compared to the as-prepared Glass/FTO/CuS films which showed no PEC activity. Up to 17.4% efficiency and 85% fill factor (FF) values were obtained from the modified film electrodes. Such characteristics have not been widely known for metal chalcogenide based film electrodes before. Different pre-annealing temperatures were attempted and the 250 °C temperature, followed by quenching, showed favorable results. Different aqueous redox couples were studied and the environmentally safe FeCl2/FeCl3 aqueous system showed highest PEC characteristics. Effect of pre-annealing on film electrode characteristics is discussed. The MnTPyP/PE matrix behaves as charge transfer catalyst for the holes across the CuS film/liquid junction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quantum Dots Synthesis And Properties · TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. PbS as a highly catalytic counterelectrode for polysulfide-based quantum dot solar cells10.1021/jp112010m ↗
2. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
3. Y. Guo, A.L. Porter, L. Huang, Nanotechnology enhanced thin-film solar cells: analysis of global research activities with future prospects, in: Proceedings of the 18th International Conference for the International Association of Management of Technology, Orlando, FL, 2009.
4. CdS/FTO thin film electrodes deposited by chemical bath deposition and by electrochemical deposition: a comparative assessment of photo-electrochemical characteristics10.1016/j.solidstatesciences.2013.01.004 ↗
5. Combined electrochemical/chemical bath depositions to prepare CdS film electrodes with enhanced PEC characteristics10.1016/j.jelechem.2013.08.022 ↗
6. Thermodynamic correlations and band gap calculations in metal oxides10.1016/j.progsolidstchem.2005.05.001 ↗
7. Enhancement of CdSe film electrode PEC characteristics by metalloporphyrin/polysiloxane matrices10.1016/j.electacta.2014.05.071 ↗
8. Colloidal quantum dot solar cells10.1016/j.solener.2011.02.005 ↗
9. Cu2S reduced graphene oxide composite for high-efficiency quantum dot solar cells. Overcoming the redox limitations of S2−/Sn2−at the counterelectrode10.1021/jz201064k ↗
10. Facile chemical bath deposition of CuS nano peas like structure as a high efficient counter electrode for quantum-dot sensitized solar cells10.1016/j.jelechem.2014.12.016 ↗
11. Photoactive p-type PbS as a counter electrode for quantum dot-sensitized solar cells10.1039/C2TA00251E ↗
12. Carbon fiber/Co9 S8 nanotube arrays hybrid structures for flexible quantum dot-sensitized solar cells10.1039/c3nr06295c ↗
13. Flexible quantum dot-sensitized solar cells with improved efficiencies based on woven titanium wires10.1039/C4TA03212H ↗
14. Controlling charge-transfer processes at semiconductor/liquid junctions10.1016/j.electacta.2006.04.035 ↗
15. Metalloporphyrin/polysiloxane modified n-GaAs surfaces: effect on photoelectrochemical efficiency and surface stability10.1016/S0022-0728(02)00680-0 ↗
16. n-GaAs band-edge repositioning by modification with metalloporphyrin/polysiloxane matrices10.1155/APEC.26.11 ↗
17. Enhancement of n-GaAs characteristics by combined heating, cooling rate and metalloporphyrin modification techniques10.1016/j.solidstatesciences.2003.11.007 ↗
18. High PEC conversion efficiencies from CuSe film electrodes modified with metalloporphyrin/polyethylene matrices10.1016/j.electacta.2015.05.125 ↗
19. CdS-sensitized TiO2 in phenazopyridine photo-degradation: catalyst efficiency, stability and feasibility assessment10.1016/j.jhazmat.2009.08.093 ↗
20. Optical properties of CuS thin films deposited by chemical bath deposition technique and their applications10.3923/tasr.2006.467.476 ↗
21. The CdS/CdSe/ZnS photoanode cosensitized solar cells basedon Pt, CuS, Cu2S, and PbS counter electrodes10.1155/2014/397681 ↗
22. One-step electrochemical deposition of hierarchical CuS nanostructures on conductive substrates as robust, high-performance counter electrodes for quantum-dot-sensitized solar cells10.1021/jp505737u ↗
23. 〈http://commons.wikimedia.org/wiki/File:PVeff%28rev141218%29.jpg〉, (accessed Feb, 2015).
24. Structural, optcesseical and electrical properties of nanostructured CdS: CuS composite thin films grown by CBD method
25. In situ preparation of CuS cathode with unique stability and high rate performance for lithium ion batteries10.1016/j.electacta.2012.07.004 ↗
26. Effects of pH value on the electrodeposition of Cu4SnS4 thin films
27. K.A.Q. Murtada, Combined electrochemical and chemical bath deposition techniques to prepare CuSe thin film electrodes for solar energy purposes, in: Faculty of Graduate Studies Combined Electrochemical and Chemical Bath Deposition Techniques to Prepare CuSe Thin Film Electrodes for Solar Energy Purposes By Khaled Ali Qasem Murtada Supervisor Prof. Hikmat S. Hilal. This Thesis is Submitted in Partial Fulfillment of the Requirements for the Degree of Master of Chemistry, Faculty of Graduate Studies, An-Najah National University, 2014.
28. M. Mari׳e, Thin film CdS/FTO/Glass electrodes prepared by combined electrodeposition/ chemical bath deposition: enhancement of PEC characteristics by coating with Metalloporphyrinate/ Polysiloxane matrices, in: Faculty of Graduate Studies. This Thesis is Submitted in Partial Fulfillment of the Requirements for the Degree of Master of Chemistry, Faculty of Graduate Studies, An-Najah National University, 2012.
29. W. Mansour, Hydrosilation reaction catalyzed by novel Metalloporphyrin catalysts intercalated inside nano- and micro particles, in: Faculty of Graduate Studies Hydrosilation reaction catalyzed by novel Metalloporphyrin catalysts intercalated inside Nano- and micro particles By Waseem Mansour Supervisor Prof. Hikmat S. Hilal and Waheed Al-Jondi. This Thesis is Submitted in Partial Fulfillment of the Requirements for the Degree of Master of Chemistry, Faculty of Graduate Studies, An-Najah National University, 2013.
30. Preparation and characterization of poly (siloxane)-supported metalloporphyrins: the effect of the support on the electronic absorption spectra10.1016/S0020-1693(00)80181-4 ↗
31. Photochemistry of manganese porphyrins. Part 1—characterisation of some water soluble complexes10.1039/F29797501532 ↗
32. Photochemistry of manganese porphyrins. Part 7. Characterisation of manganese porphyrins in organic and aqueous/organic microheterogeneous systems10.1039/dt9820001231 ↗
33. Preparation and characterization of tetra (4-pyridyl) porphyrinatomanganese (III) cation supported covalently on poly (siloxane)10.1016/0304-5102(91)85105-B ↗
34. Investigation of the catalytic activity of poly (siloxane)-supported tetra (4-pyridyl) porphyrinatomanganese (III) in olefin oxidation reactions10.1016/0304-5102(93)80003-D ↗
35. Facile purification of meso-tetra (pyridyl) porphyrins and detection of unreacted porphyrin upon metallation of meso-tetra (aryl) porphyrins10.6060/mhc2012.120253z ↗
36. 〈http://www.pveducation.org/pvcdrom/solar-cell-operation/fill-factor〉.
37. Comparisons of grain size-density trajectory during microwave and conventional sintering of titanium nitride10.1016/j.jallcom.2013.07.159 ↗
38. Electrodes prepared by vacuum evaporation: enhancement of photoelectrochemical efficiency by argon gas condensation method10.5796/electrochemistry.82.25 ↗
39. Comparative study of the properties of CuS thin films deposited using different bath processes
40. Effect of the size-induced structural transformation on the band gap in CdS nanoparticles
41. Annealing effects on the properties of copper oxide thin films prepared by chemical deposition10.1016/S1452-3981(23)19665-9 ↗
42. A. Sahoo P. Mohanta A. Bhattacharyya. Structural and optical properties of CuS thin films deposited by thermal co-evaporation, in: Proceeding of the IOP Conference Series: Materials Science and Engineering IOP Publishing, pp. 012123, 201510.1088/1757-899X/73/1/012123 ↗
43. Photo-catalytic degradation of methyl orange in water on CuS–Cu2S powders
44. Conversion of chemically deposited CuS thin films to and by annealing10.1088/0268-1242/13/10/019 ↗
45. Flexible quantum dot-sensitized solar cells with improved efficiencies based on woven titanium wires10.1039/C4TA03212H ↗
46. Modification of n-Si characteristics by annealing and cooling at different rates10.1080/0882751031000116124 ↗
47. Effect of annealing and of effect of annealing and of cooling rates on n-GaAs electrode photoelectrochemical characteristics10.1080/0882751031000116115 ↗
48. Effect of annealing time on the composition, microstructure and band gap of copper zinc tin sulfide thin films10.5185/amlett.2015.6584 ↗
49. Chemically deposited Sb2S3 and Sb2S3–CuS thin films10.1149/1.1838605 ↗
50. Reducing the nano-scale defect formation of atomic-layer-deposited SrTiO3 films by adjusting the cooling rate of the crystallization annealing of the seed layer10.1016/j.tsf.2015.07.008 ↗
51. Effect of cooling rate of pre-annealed CdS thin film electrodes prepared by chemical bath deposition: enhancement of photoelectrochemical characteristics10.1016/j.electacta.2008.12.062 ↗