journal article·2014-12

Structured wire: From single wire experiments to multi-crystalline silicon wafer mass production

Oliver Anspach, Björn Hurka, Kirsten Sunder

Publisher page

Abstract

Abstract This work presents the evolution from fundamental single wire sawing experiments using structured wire for the first time to the introduction of this wire in multi-crystalline silicon wafer mass production. It is shown that via single wire experiments 100% higher throughput and more than 10% less specific energy consumption were foreseen for the replacement of straight with structured wire in mass production of multi-crystalline silicon wafers. The analysis of production data demonstrates that these predictions were even exceeded and that additionally, 45% less wire consumption and 40% less slurry consumption were achieved. This work reveals the influence on wafer metrology and gives a basic description of the dynamics in the cutting slot.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Silicon and Solar Cell Technologies · Force Microscopy Techniques and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. F. Henley, S. Kang, A. Brailove, A. Fujisaka, Kerf-free wafering for high-volume, high-efficiency c-Si cell, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, Hamburg, Germany (2011).
2. M. Koitzsch, D. Lewke, F. Kaule, M. Oswald, St. Schönfelder, M. Turek, A. Büchel, H.-U. Zühlke, Thermal Laser Separation – Damage-free and kerfless cutting of wafers and solar cells, Proceedings of 6th International workshop on Crystalline Silicon for Solar Cells, Aix-les-Bains, France (2012).
3. S. Schönfelder, O. Breitenstein, S. Rissland, R. De Donno, J. Bagdahn, Glue-cleave: kerfless wafering for silicon wafers with metal on glueing and removable interface, in: Proceedings of the 22nd Workshop on Crystalline Silicon Solar Cells & Modules: Materials and Processes, Colorado, USA (2012).10.1016/j.egypro.2013.07.368 ↗
4. New crystalline silicon ribbon materials for photovoltacis
5. E. Sachs, A. Lorenz, R. Wallace, S. Hudelson, R. Jonczyk, B. Kernan, M. Ismail, D.Harvey, C.L,F. van Mierlo, Direct Wafer™ – High performance 156mm silicon wafers at half the cost of sawn, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference, Paris, France (2013).
6. F. De Moro, E. Jolivet, E. Tupin, R. Varrot, C. Bigot, B. Heilbronn, P. Keller, S. Seren, B. Albrecht, G. Hahn, Towards 18% efficiency on below 100µm thick multicrystalline silicon wafers from the RST process, in: Proceedings Table 1f the 28th European Photovoltaic Solar Energy Conference, Paris, France (2013).
7. A. Bidiville, K. Wasmer, R. Kraft, C. Ballif, Diamond wire-sawn silicon wafers–from the lab to the cell production, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, Hamburg, Germany (2009).
8. D. Kray, M. Schumann, A. Eyer, G.P. Willeke, R. Kübler, J. Beinert, G. Kleer, Solar wafer slicing with loose and fixed grains, in: Proceedings of the Conference Record of the 4th IEEE World Conference on Photovoltaic Energy Conversion, Vol. 1, (2006) 948-951.10.1109/WCPEC.2006.279613 ↗
9. C. Jaeggi, C. DeMeyer, F. Wiedmer, R. Stierli, P. Simoncic, F. Assi, K. Wasmer, Effects of wire lifetime in diamond wire wafering on the wafer roughness and mechanical strength, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference, Frankfurt, Germany (2012).
10. J-I. Bye, L. Norheim, B. Holme, Ø. Nielsen, S. Steinsvik, S.A. Jensen, G. Fragiacomo, I. Lombardi, Industrialised diamond wire wafer slicing for high efficiency solar cells, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, Hamburg, Germany (2011).
11. Basic mechanisms and models of multiwire sawing10.1002/adem.200400578 ↗
12. O. Anspach, B. Hurka, J. Zeh, F.-W. Schulze, Influence of abrasive shape and size distribution on the wire sawing process, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, Hamburg, Germany (2009).
13. The solar cell wafering process
14. D. Heppner, R. Sueldia, A. Daridon, P. M. Nasch, M. Yin, New cost saving c-Si PV wafer slicing process by advanced wire technology, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, Hamburg, Germany (2011).
15. B. Weber, S. Riepe, Slurry based multi wire sawing with structured wire, in: Proceedings of the 7th International Workshop on Crystalline Silicon Solar Cells, Fukuoka, Japan (2013).
16. O. Anspach, M. Berg, F.-W. Schulze, Experimental Setup for investigations on the wire sawing process, in: Proceedings of the 10th Scientific and Business Conference SILICON, Rožnov pad Radhoštěm, Czech Republic (2006).
17. O. Anspach, F.-W. Schulze, Glycol to water-based slurry, investigation on the wire sawing process, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, Milan, Italy (2007).
18. Norm, DIN EN ISO 4288, Oberflächenbeschaffenheit: Tastschnittverfahren. Regeln und Verfahren für die Beurteilung der Oberflächenbeschaffenheit, Deutsches Institut für Normung (ed.). Beuth, Berlin, Germany (1998).
19. Norm, DIN EN ISO 4287, Geometrische Produktspezifikationen (GPS)–Oberflächenbeschaffenheit: Tastschnittverfahren–Benennungen, Definitionen und Kenngrößen der Oberflächenbeschaffenheit. Deutsches Institut für Normung (ed.). Beuth, Berlin, Germany (1998).
20. H. J. Möller, S. Retsch, R. Rietzschel, On the origin of wafer saw marks in slurry based multi - wire sawing, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference, Paris, France (2013).