Higher emitter quality by reducing inactive phosphorus
Source abstract
Abstract
Abstract In this work, we study the influence of the amount of active phosphorus atoms in the emitter region of silicon N+/P solar cells. After emitter formation by thermal diffusion, a part of phosphorus atoms in the vicinity of the surface is electrically inactive. This results in a high emitter saturation current density and in a poor quantum efficiency in the blue wavelength range. This emitter region is usually known as dead layer. We first introduce a simple method to determine the percentage of electrically active phosphorus atoms in emitters obtained from a low pressure POCl3 diffusion furnace. Different phosphorus diffusions are performed using different parameters (temperature, time, POCl3/O2 ratio, and preoxidation time). We then investigate the effect of the fraction of active phosphorus on the doping level and on the emitter passivation. We show that diffusion parameters can greatly influence the active phosphorus percentage, particularly the POCl3/O2 ratio or the addition of a preoxidation step. Concerning the emitter passivation, a linear variation of the emitter saturation current density as a function of the active phosphorus percentage is observed. Using appropriate POCl3/O2 ratio or preoxidation time, we obtain an emitter saturation current density around 100 fA/cm2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. A quantitative model for the diffusion of phosphorus in silicon and the emitter dip effect10.1149/1.2133492 ↗
2. Interactions between sequential dopant diffusions in silicon — a review10.1088/0022-3727/10/4/011 ↗
3. Electrical properties and stability of supersaturated phosphorus-doped silicon layers10.1149/1.2127626 ↗
4. The effects of phosphorus precipitation on the open circuit voltage in n+/p silicon solar cells10.1016/0379-6787(84)90114-5 ↗
5. Surface recombination velocity of highly doped n-type silicon10.1063/1.363250 ↗
6. G. Goaer, N. Le Quang, C. Bourcheix, Y. PellegrinY., J. Loretz, S. Martinuzzi, I. Perichaud, F. Warchol, Cost reduction in mass production of large dimension multicrystalline solar cells by introduction of Lydop process, in: Proceedings of the 19th European Photovoltaic Solar Energy Conference, Paris, France, 2004,pp. 1025–1028.
7. Study of the composition of hydrogenated silicon nitride SiNx:H for efficient surface and bulk passivation of silicon10.1016/j.solmat.2009.01.023 ↗
8. Contactless determination of current–voltage characteristics and minority carrier lifetimes in semiconductors from quasi-steady-state photoconductance data10.1063/1.117723 ↗
9. D.E. Kane, R.M. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method, in: Proceedings of the 18th IEEE Photovoltaic Specialists Conference, Las Vegas, Nevada, 1985, pp. 578–583.
10. Dopant and carrier concentration in Si in equilibrium with monoclinic SiP precipitates10.1103/PhysRevB.53.7836 ↗
11. High concentration diffusivity and clustering of arsenic and phosphorus in silicon10.1063/1.367008 ↗
12. A model of clustering of phosphorus atoms in silicon10.1016/j.mseb.2005.06.014 ↗
13. D. Mathiot, Diffusion modelling from a fundamental viewpoint, in: Proceedings of the 5th International Symposium on Silicon Materials Science and Technology, Boston, 1986,pp. 556–570.
14. Green · 1984
15. S. Sze, Semiconductor Devices, Physics and Technology, John Wiley and Sons Inc., 2001.
16. Modeling of carrier mobility against carrier concentration in arsenic-, phosphorus- and boron-doped silicon10.1109/T-ED.1983.21207 ↗
17. Kinetics of phosphorus predeposition in silicon using POCl310.1149/1.2134437 ↗
18. Redistribution of acceptor and donor impurities during thermal oxidation10.1063/1.1713825 ↗
19. B. Bazer-Bachi, P. Papet, B. Semmache, Y. Pellegrin, O. Nichiporuk, N. Le Quang, M. Lemiti, Control of phosphorus diffusion using Lydop® technology for obtaining different kind of phosphorus emitter, in: Proceedings of the 23rd european photovoltaic solar energy conference and exhibition, Valencia, Spain, 2008, pp. 1793-1796.
20. Surface recombination velocity of phosphorus-diffused silicon solar cell emitters passivated with plasma enhanced chemical vapor deposited silicon nitride and thermal silicon oxide10.1063/1.1350633 ↗
21. Comparison of emitter saturation current densities determined by injection-dependent lifetime spectroscopy in high and low injection regimes, Progress in Photovoltaics: Research and Applications
22. M. Bähr, S. Dauwe, L. Mittelstädt, J. Schmidt, G. Gobsch, Surface passivation and contact resistance on various emitters of screen-printed crystalline silicon solar cells, in: Proceedings of the 19th European Photovoltaic Solar Energy Conference, Paris, France, 2004, pp. 955–958.
23. C. Allebé, L. Tous, B. Vermang, T. Janssens, P. Choulat, J. John, N. Posthuma, E.V. Kerschaver, An integrated approach for selective emitter formation, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2009,pp. 1820-1822.
24. F. Book, A. Dastgheib-Shirazi, B. Raabe, H. Haverkamp, G. Hahn and P. Grabitz, Detailed analysis of high sheet resistance emitters for selectively doped silicon solar cells, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2009, pp. 1719–1722.
25. A. Cuevas, M. Balbuena, R. Galloni, Comparison and optimization of different n+ dopant profiles for silicon solar cells, in: Proceedings of the 19th IEEE Photovoltaic Specialists Conference, New Orleans, 1987, pp. 918-924.