journal article·2014-04

The influence of defects on the cellular open circuit voltage in CuInGaSe2 thin film solar modules—An illuminated lock-in thermography study

J. Adams, A. Vetter, F. Hoga, F. Fecher, J.P. Theisen, C.J. Brabec, C. Buerhop-Lutz

Publisher page

Abstract

CuInGaSe 2 (CIGS) thin film solar modules, despite their high efficiency, may contain three different kinds of macroscopic defects referred to as bulk defects, interface defects and interconnect defects. This occurs due to film`s sensitivity to inhomogeneities during the manufacturing process. The result is a decrease of electrical power output from a cell or module. In this paper, we present the influence of macroscopic defects on the electrical behavior of CIGS thin film solar cells. To accomplish this, we investigated the relation between the IR-signal emitted of a defect in a cell (measured using illuminated lock-in thermography ILIT) and the respective open circuit cell voltage ( V oc,cell) under low light conditions (< 100 W/m²). Furthermore, we developed a modified masking method of measuring V oc,cell of a single cell within a thin film solar module.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Thermography and Photoacoustic Techniques · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. New world record efficiency for Cu (In, Ga) Se2 thin‐film solar cells beyond 20%10.1002/pip.1078 ↗
2. Solar cell efficiency tables (version 39)10.1002/pip.2163 ↗
3. 2D network simulation and luminescence characterization of Cu (In, Ga) Se2 thin film modules10.1002/pip.2171 ↗
4. Quantitative evaluation of shunts in solar cells by lock-in thermography10.1002/pip.520 ↗
5. Investigation of series resistance losses by illuminated lock-in thermography10.1002/pip.633 ↗
6. Infrared analysis of thin-film photovoltaic modules
7. On the detection of shunts in silicon solar cells by photo-and electroluminescence imaging10.1002/pip.803 ↗
8. Highly sensitive non-contact shunt detection of organic photovoltaic modules10.1016/j.solmat.2012.01.022 ↗
9. Breitenstein · 2010
10. O.Breitenstein, J.P. Rakotoniaina, M. Kaes, S. Seren, T. Pernau, G. Hahn, W. Wartaand J. Isenberg, Lock-in thermography—a universal tool for local analysis of solar cells, in: Proceedings of the 20th Photovoltaic Solar Energy Conference, 2005, vol. 20, pp. 590–593.
11. Lock-in thermography: a versatile tool for failure analysis of solar cells
12. Spatially resolved evaluation of power losses in industrial solar cells by illuminated lock-in thermography10.1002/pip.547 ↗
13. Light-modulated lock-in thermography for photosensitive pn-structures and solar cells10.1002/pip.555 ↗
14. Lock-in thermography as a tool for quality control of photovoltaic modules10.1002/ese3.1 ↗
15. Photovoltaic characterization of dye-sensitized solar cells: effect of device masking on conversion efficiency10.1002/pip.683 ↗
16. 〈http://www.ircam.de〉, 2013.
17. Approaches to flexible CIGS thin-film solar cells10.1016/j.tsf.2004.11.063 ↗
18. Luque · 2002
19. Manufacturing and application of CIS solar modules10.1016/j.tsf.2006.12.150 ↗
20. Poortmans · 2006
21. B. Dimmler, M. Powalla, R. Schaeffler, CIS solar modules: pilot production at Wuerth Solar, in: Proceedings of the IEEE Photovoltaic Specialists Conference, 2005, pp. 189–194.10.1109/PVSC.2005.1488102 ↗
22. 〈http://www.keithley.de〉, 2013.
23. Electrothermal simulation of a defect in a solar cell10.1063/1.1866474 ↗
24. Realistic evaluation of power losses in solar cells by using thermographic methods10.1063/1.1690103 ↗
25. Modeling of spatially inhomogeneous solar cells by a multi-diode approach10.1002/pssa.200521205 ↗
26. Spatial modeling of thin-film solar modules using the network simulation method and SPICE10.1109/JPHOTOV.2011.2160524 ↗