Broad-band conical-shaped perfect absorber metamaterial for solar cells
Source abstract
Abstract
In this paper, we present a design, simulation, and measurement of a single broad-band metamaterial absorber composed of a consecutive layer of conical-shaped SiO2/Al/SiO2/Al. The circular symmetry of the conical-shaped resonator makes the metamaterial absorber polarization insensitive so that the full intensity of the sunlight can be harvested. The physical behavior of the broad-band mechanism is investigated both numerically by finite difference time domain (FDTD) and experimentally. The numerical calculations indicate the origin of broadband absorption is due to the couplings between the two metal layers sandwiched in between two dielectric SiO2 layers. The effect of geometrical parameters and the layer thicknesses are studied numerically and experimen-tally. The experimental results show the average absorption strength of the metamaterial absorber is around 80% within the spectral range of 400-1000 nm. The experimental and simulation spectra are well-consistent. The proposed platform has potential use in many potential applications, such as solar cells, photodetectors, cameras, etc.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metamaterials and Metasurfaces Applications · Advanced Antenna and Metasurface Technologies · Antenna Design and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Experimental verification of a negative index of refraction10.1126/science.1058847 ↗
2. Metamaterials and negative refractive index10.1126/science.1096796 ↗
3. Electromagnetic wave interactions with a metamaterial cloak
4. Optical cloaking with metamaterials10.1038/nphoton.2007.28 ↗
5. Negative refraction makes a perfect lens10.1103/PhysRevLett.85.3966 ↗
6. A metamaterial absorber for the terahertz regime: design, fabrication, and characterization10.1364/OE.16.007181 ↗
7. Perfect metamaterial absorber10.1103/PhysRevLett.100.207402 ↗
8. Experimental demonstration of ultrasensitive sensing with terahertz metamaterial absorbers: a comparison with the metasurfaces10.1063/1.4906109 ↗
9. Fast adaptive thermal camouflage based on flexible VO2/graphene/CNT thin films10.1021/acs.nanolett.5b04090 ↗
10. Broadband polarization-independent perfect absorber using a phase-change metamaterial at visible frequencies10.1038/srep03955 ↗
11. Plasmonic tunable metamaterial absorber as an ultraviolet protection film10.1063/1.4863202 ↗
12. Experimental demonstration of terahertz metamaterial absorbers with a broad and flat high absorption band10.1364/OL.37.000154 ↗
13. A broadband terahertz absorber using multilayer stacked bars
14. Broadband light absorption using a multilayered gap surface plasmon resonator10.1007/s00339-014-8459-3 ↗
15. Customized broadband metamaterial absorbers for arbitrary polarization10.1364/OE.18.022187 ↗
16. Omnidirectional, polarization-insensitive and broadband thin absorber in the terahertz regime10.1364/JOSAB.27.000498 ↗
17. Polarization insensitive, broadband terahertz metamaterial absorber10.1364/OL.36.003476 ↗
18. Polarization insensitive and omnidirectional broadband near perfect planar metamaterial absorber in the near-infrared regime10.1063/1.3670333 ↗
19. Broadband polarization-independent perfect absorber using a phase-change metamaterial at visible frequencies10.1038/srep03955 ↗
20. Multiband and broadband polarization-insensitive perfect absorber devices based on a tunable and thin double split-ring metamaterial10.1364/OE.23.003523 ↗
21. Route towards low cost-high efficiency second generation solar cells: current status and perspectives10.1007/s10854-014-2196-4 ↗
22. Perfect selective metamaterial solar absorbers10.1364/OE.21.0A1078 ↗
23. Dincer · 2014 · vol. 144 · 93
24. Perfect metamaterial absorber design for solar cell applications10.1080/17455030.2015.1042091 ↗
25. Design and characterization of a dual-band perfect metamaterial absorber for solar cell applications10.1016/j.jallcom.2016.02.066 ↗
26. Wide-band polarization-independent perfect metamaterial absorber based on concentric rings topology for solar cell application10.1016/j.jallcom.2016.04.162 ↗
27. A novel molten salt energy storage-solar thermophotovoltaic integrated system with mid-temperature metamaterial spectrum reshaping10.1016/j.solmat.2022.111799 ↗
28. J.N. Munday, H.A. Atwater, Large integrated absorption enhancement in plasmonic solar cells by combining metallic gratings and antireflection coatings, Nano Lett. 11, (6), (2011) 2195–2200-2201.10.1021/nl101875t ↗
29. Metamaterial electromagnetic wave absorbers
30. Nearly perfect metamaterial plasmonic absorbers for solar energy applications10.1007/s11082-018-1464-6 ↗
31. 2021
32. Material dependence of the distributed bolometric effect in resonant metallic nanostructures10.1117/12.934124 ↗
33. Perfect coupling of light to surface plasmons by coherent absorption10.1103/PhysRevLett.108.186805 ↗
34. Mid-infrared narrow band plasmonic perfect absorber for vibrational spectroscopy10.1016/j.sna.2019.111757 ↗
35. Dual-band absorption of mid-infrared metamaterial absorber based on distinct dielectric spacing layers10.1364/OL.38.001125 ↗
36. Is it possible to develop complex S−Se graded band gap profiles in kesterite-based solar cells?10.1021/acsami.9b09813 ↗