Shape-stable phase change composite for highly efficiency thermal energy storage using metal-organic framework-encapsulated yeast as porous carbon carrier
Source abstract
Abstract
Technical barriers including the poor thermal conductivity , low energy conversion efficiency, and melting leakage hindered the large-scale storage of waste heat and solar energy by the shape-stable phase change materials (ss-PCMs). To address the challenges mentioned above, a high-performance ss-PCM is fabricated using the thermal conducive 3D interconnected scaffold that derived from a biomimetically grown yeast-templated zeolitic imidazolate framework-8 (ZIF-8) precursor. After carbonization, the morphology and porosity-controlled bio-inspired derived ZIF-8@yeast porous carbon (DYC) exhibited unique porous skeleton, which allowing high capillary adsorption and effective chemical interaction for mannitol storage. The obtained DYC/mannitol ss-PCM exhibited high thermal conductivity (1.17 W/mK), high relative enthalpy efficiency (98.96%), and outstanding stability and recyclability. Meanwhile, compared with the pure mannitol, the supercooling degree of the novel DYC/mannitol was decreased by 18.42%. All findings suggested that the ss-PCM by yeast-templated MOFs derived hierarchical porous carbon has good application prospects in high-density energy storage.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Thermal energy storage for low and medium temperature applications using phase change materials–a review10.1016/j.apenergy.2016.05.097 ↗
2. Thermal energy storage with phase change material—a state-of-the art review10.1016/j.scs.2013.05.007 ↗
3. Enhanced thermal performance of phase-change materials supported by mesoporous silica modified with polydopamine/nano-metal particles for thermal energy storage10.1016/j.renene.2021.06.021 ↗
4. Fabrication and stability of form-stable diatomite/paraffin phase change material composites10.1016/j.enbuild.2014.02.082 ↗
5. One-step and solvent-free synthesis of polyethylene glycol-based polyurethane as solid–solid phase change materials for solar thermal energy storage10.1021/acs.iecr.8b05903 ↗
6. Experimental investigation on thermal management performance of electric vehicle power battery using composite phase change material10.1016/j.jclepro.2018.08.076 ↗
7. Mineral-based form-stable phase change materials for thermal energy storage: a review on encapsulation techniques, performance enhancements and practical applications10.1016/j.ensm.2022.01.003 ↗
8. Enhanced thermal performance of phase change materials supported by hierarchical porous carbon modified with polydopamine/nano-Ag for thermal energy storage10.1016/j.est.2022.104129 ↗
9. Lipophilic modified hierarchical multiporous rGO aerogel-based organic phase change materials for effective thermal energy storage10.1021/acsami.2c17041 ↗
10. Thermal performance of galactitol/mannitol eutectic mixture/expanded graphite composite as phase change material for thermal energy harvesting10.1016/j.est.2020.101997 ↗
11. Three-dimensional interpenetrating network phase-change composites with high photothermal conversion and rapid heat storage and release10.1021/acsaem.1c01061 ↗
12. Carbon‐based composite phase change materials for thermal energy storage, transfer, and conversion10.1002/advs.202001274 ↗
13. A review on the fabrication methods for structurally stabilised composite phase change materials and their impacts on the properties of materials10.1016/j.rser.2022.112134 ↗
14. A review on carbon-based phase change materials for thermal energy storage10.1016/j.est.2022.104166 ↗
15. Yeast template-derived multielectron reaction NASICON structure Na3MnTi (PO4) 3 for high-performance sodium-ion batteries10.1021/acsami.1c17700 ↗
16. Network structural CNTs penetrate porous carbon support for phase‐change materials with enhanced electro‐thermal performance10.1002/aelm.201901428 ↗
17. Effect of MOF derived hierarchical Co3O4/expanded graphite on thermal performance of stearic acid phase change material10.1016/j.solener.2018.06.062 ↗
18. Highly porous carbons derived from MOFs for shape-stabilized phase change materials with high storage capacity and thermal conductivity10.1039/C6RA04059D ↗
19. A facile one-step synthesis of porous N-doped carbon from MOF for efficient thermal energy storage capacity of shape-stabilized phase change materials10.1016/j.mtener.2019.01.011 ↗
20. Hierarchical 3D reduced graphene porous-carbon-based PCMs for superior thermal energy storage performance10.1021/acsami.8b09541 ↗
21. Core-sheath structural carbon materials for integrated enhancement of thermal conductivity and capacity10.1016/j.apenergy.2017.12.106 ↗
22. In situ deposition of MOF199 onto hierarchical structures of bamboo and wood and their antibacterial properties10.1039/C9RA07046J ↗
23. Musarurwa · 2022
24. A family of MOFs@ Wood-Derived hierarchical porous composites as freestanding thick electrodes of solid supercapacitors with enhanced areal capacitances and energy densities
25. Natural porous wood decorated with ZIF-8 for high efficient iodine capture10.1016/j.matchemphys.2020.123964 ↗
26. In situ growth of metal–organic frameworks in three-dimensional aligned lumen arrays of wood for rapid and highly efficient organic pollutant removal10.1021/acs.est.8b06564 ↗
27. Yeast-based porous carbon with superior electrochemical properties10.1021/acsomega.1c05278 ↗
28. Integrating hierarchical interfacial polarization in yeast-derived Mo2C/C nanoflower/microsphere nanoarchitecture for boosting microwave absorption performance10.1016/j.carbon.2021.12.073 ↗
29. Simultaneous saccharification and juice co-fermentation for high-titer ethanol production using sweet sorghum stalk10.1016/j.renene.2018.11.005 ↗
30. Carbonized ZIF-8 incorporated mixed matrix membrane for stable ABE recovery from fermentation broth10.1016/j.memsci.2019.02.061 ↗
31. Yeasts-derived nitrogen-doped porous carbon microcapsule prepared by silica-confined activation for supercapacitor10.1016/j.jcis.2021.05.149 ↗
32. Facile synthesis of α-Fe2O3@ porous hollow yeast-based carbonaceous microspheres for fluorescent whitening agent-VBL wastewater treatment10.1016/j.jssc.2015.12.027 ↗
33. Improving ZIF-8 stability in the preparation process of polyimide-based organic solvent nanofiltration membrane10.1016/j.seppur.2019.115687 ↗
34. Preparation, characterization and performance of paraffin/sepiolite composites as novel shape-stabilized phase change materials for thermal energy storage10.1016/j.solmat.2021.111300 ↗
35. Preparation of Mannitol@ Silica core–shell capsules via an interfacial polymerization process from water-in-oil emulsion10.1016/j.colsurfa.2014.06.018 ↗
36. Energy/temperature diagram and compression behavior of the polymorphs of D‐mannitol10.1002/(SICI)1520-6017(200004)89:4<457::AID-JPS3>3.0.CO;2-G ↗
37. Ni@ rGO into nickel foam for composite polyethylene glycol and erythritol phase change materials10.1016/j.cej.2022.138900 ↗
38. Biomass-derived porous carbons support in phase change materials for building energy efficiency: a review
39. Nano-Ag modified bio-based loofah foam/polyethylene glycol composite phase change materials with higher photo-thermal conversion efficiency and thermal conductivity10.1016/j.est.2022.105238 ↗
40. Estimation of thermal endurance of multicomponent sugar alcohols as phase change materials10.1016/j.applthermaleng.2014.09.032 ↗
41. Fundamental study on development of latent heat storage material for waste heat recovery of biomass gasification10.5916/jkosme.2014.38.5.533 ↗
42. Characterization of medium-temperature phase change materials for solar thermal energy storage using temperature history method10.1016/j.solmat.2017.11.006 ↗
43. Screening of sugar alcohols and their binary eutectic mixtures as phase change materials for low-to-medium temperature thermal energy storage.(Ⅱ): isothermal melting and crystallization behaviors10.1016/j.energy.2019.05.109 ↗
44. Generalization of the gibbs-thomson equation10.1016/0039-6028(65)90024-5 ↗
45. Development of renewable biomass-derived carbonaceous aerogel/mannitol phase-change composites for high thermal-energy-release efficiency and shape stabilization10.1021/acsaem.0c02864 ↗
46. Low concentration graphene nanoplatelets for shape stabilization and thermal transfer reinforcement of Mannitol: a phase change material for a medium-temperature thermal energy system10.1088/2053-1591/aaaf59 ↗
47. Synthesis and properties of nanoencapsulated D-mannitol for medium temperature thermal energy storage10.1016/j.solmat.2020.110473 ↗
48. Leakage-proof phase change composites supported by biomass carbon aerogels from succulents10.1039/C7GC03595K ↗
49. Biomass-based shape-stabilized phase change materials from artificially cultured ship-shaped diatom frustules with high enthalpy for thermal energy storage10.1016/j.compositesb.2020.108500 ↗
50. Enhanced thermal performance of phase-change material supported by nano-Ag coated eggplant-based biological porous carbon10.1016/j.est.2021.103174 ↗
51. Highly graphitized 3D network carbon for shape-stabilized composite PCMs with superior thermal energy harvesting10.1016/j.nanoen.2018.03.075 ↗
52. Preparation and thermal properties of exfoliated graphite/erythritol/mannitol eutectic composite as form-stable phase change material for thermal energy storage10.1016/j.solmat.2018.01.012 ↗
53. Multi-walled carbon nanotube laden with D-Mannitol as phase change material: characterization and experimental investigation10.1016/j.apt.2018.08.021 ↗
54. D-mannitol@ silica/graphene oxide nanoencapsulated phase change material with high phase change properties and thermal reliability10.1016/j.apenergy.2020.115020 ↗
55. Nanoencapsulation of binary sugar alcohols at neutral pH conditions