Mechanical agitation triggered crystallization of eutectic phase change material xylitol/erythritol with persistent supercooling for controllable heat retrieval
Source abstract
Abstract
Towards latent heat storage for days, or even extending to months in the context of solar energy utilization, the exploration of phase change materials (PCMs) with stable supercooling and the following crystallization triggering are carried out. The present work confirmed the persistent supercooling property of the xylitol/erythritol eutectic mixture. The coupled technique combining mechanical agitation with seeding was proposed to trigger crystallization, so as to facilitate the heat retrieval whenever heat is in demand. The xylitol/erythritol eutectic keeps supercooling state without crystallization at ambient temperature for at least 10 days, thus it can serve as applicable PCM for controllable heat retrieval. Such severe supercooling is mainly attributed to the particular molecular structure of polyalcohols and dramatic increase of dynamic viscosity. In particular, on the basis of secondary nucleation principle, the coupled technique combining mechanical agitation and seeding can be a preferable technique to efficiently trigger crystallization of the present eutectic PCM, so as to realize controllable heat retrieval. Such combined technique has main advantages of high efficiency and reproducible crystallization process. The agitation duration is shortened to 1.8 min with seeding, in comparison to a longer value of 43.3 min without seeding. Although the single technique of mechanical agitation can also trigger the crystallization, the agitation is found to be time-consuming and the triggered crystallization process is in poor consistency among parallel specimens. Furthermore, the crystallization initiating is greatly advanced with high agitation rate (300 r/min), and the agitation duration to sufficiently activate crystallization can be significantly shortened. The results suggest that appropriately high agitation rate favors the efficient heat retrieval. The obtained results are helpful to gain a better understanding on the supercooled PCMs based controllable heat retrieval.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Urban Heat Island Mitigation · Building Energy and Comfort Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Nanocomposite phase change materials for high-performance thermal energy storage: a critical review10.1016/j.ensm.2022.12.037 ↗
2. Phase change materials in solar domestic hot water systems: a review10.1016/j.ijft.2021.100075 ↗
3. Li · 2023
4. An overview on the use of additives and preparation procedure in phase change materials for thermal energy storage with a focus on long term applications10.1016/j.est.2022.105140 ↗
5. State-of-technology review of water-based closed seasonal thermal energy storage systems10.1016/j.rser.2019.06.048 ↗
6. Large-scale living laboratory of seasonal borehole thermal energy storage system for urban district heating10.1016/j.apenergy.2020.114763 ↗
7. A review of available technologies for seasonal thermal energy storage10.1016/j.solener.2013.06.006 ↗
8. Screening of sugar alcohols and their binary eutectic mixtures as phase change materials for low-to-medium temperature latent heat storage. (Ⅰ): non-isothermal melting and crystallization behaviors10.1016/j.energy.2018.07.081 ↗
9. Screening of sugar alcohols and their binary eutectic mixtures as phase change materials for low-to-medium temperature thermal energy storage. (Ⅱ): isothermal melting and crystallization behaviors10.1016/j.energy.2019.05.109 ↗
10. Review on sodium acetate trihydrate in flexible thermal energy storages: properties, challenges and applications10.1016/j.est.2021.102780 ↗
11. Hydrophobised carbon foams for improved long-term seasonal solar thermal energy storage10.1016/j.solmat.2020.110849 ↗
12. Supercooled sugar alcohols stabilized by alkali hydroxides for long-term room-temperature phase change solar-thermal energy storage
13. Xylitol used as phase change material: nucleation mechanisms of the supercooling rupture by stirring10.1016/j.est.2021.103922 ↗
14. Triggering and acceleration of xylitol crystallization by seeding and shearing: rheo-optical and rheological investigation10.1016/j.solmat.2020.110840 ↗
15. Crystallization by local cooling of supercooled sodium acetate trihydrate composites for long-term heat storage10.1016/j.enbuild.2018.09.035 ↗
16. Nucleation triggering of highly undercooled Xylitol using an air lift reactor for seasonal thermal energy storage10.3390/app9020267 ↗
17. Bubble-injection-enabled significant reduction of supercooling and controllable triggering of crystallization of erythritol for medium-temperature thermal energy storage10.1016/j.solmat.2021.111538 ↗
18. A fast-heat battery system using the heat released from detonated supercooled phase change materials10.1016/j.energy.2020.119496 ↗
19. Mechanism of electrical nucleation in a latent heat storage device with supercooled aqueous solution of sodium acetate trihydrate10.1016/j.jcrysgro.2019.03.018 ↗
20. Effect of percussion vibration on solidification of supercooled salt hydrate PCM in thermal storage unit10.1016/j.renene.2018.03.077 ↗
21. Experimental investigation on space heating performances of supercooled thermal storage units with sodium acetate trihydrate10.1016/j.enbuild.2022.112329 ↗
22. Thermal management of using controlled crystallization supercooled PCM in space heating applications for different heating profiles in the UK10.1016/j.renene.2023.02.077 ↗
23. Incorporation of controllable supercooled phase change material heat storage with a solar assisted heat pump: testing of crystallization triggering and heating demand-based modelling study10.1016/j.est.2022.105744 ↗
24. Eutectic mixtures of sugar alcohols for thermal energy storage in the 50–90 °C temperature range10.1016/j.solmat.2014.11.050 ↗
25. New sugar alcohols mixtures for long-term thermal energy storage applications at temperatures between 70 °C and 100 °C10.1016/j.solmat.2016.06.048 ↗
26. Corrosion assessment of erythritol as a phase change material in latent heat thermal energy storage system10.1007/s10973-022-11798-3 ↗
27. Describing the uncertainties in experimental results10.1016/0894-1777(88)90043-X ↗
28. Uncertainty analysis for measurement of measurand10.1016/j.measurement.2010.07.001 ↗
29. The experimental phase diagram study of the binary polyols system erythritol-xylitol10.1016/j.solmat.2017.08.005 ↗
30. Characterization of different sugar alcohols as phase change materials for thermal energy storage applications10.1016/j.solmat.2016.10.009 ↗
31. Polyvinylpyrrolidone (PVP)-enabled significant suppression of supercooling of erythritol for medium-temperature thermal energy storage10.1016/j.est.2021.103915 ↗
32. Hydroxyl group functionalized graphene oxide nanosheets as additive for improved erythritol latent heat storage performance: a comprehensive evaluation on the benefits and challenges10.1016/j.solmat.2020.110658 ↗
33. Thermal performance of a solar cooker based on an evacuated tube solar collector with a PCM storage unit10.1016/j.solener.2004.08.001 ↗
34. Experimental study on the thermal storage performance and non-isothermal crystallization kinetics of pentaerythritol blended with low melting metal10.1016/j.tca.2018.02.007 ↗
35. Applicability for heat storage of binary systems of neopentylglycol, pentaglycerine and pentaerythritol: a comparative analysis10.1016/0165-1633(88)90051-2 ↗
36. Role of viscosity in influencing the glass-forming ability of organic molecules from the undercooled melt state10.1007/s11095-011-0540-4 ↗
37. Slow molecular mobility in the crystalline and amorphous solid states of pentitols: a study by thermally stimulated depolarisation currents and by differential scanning calorimetry10.1016/j.carres.2007.01.016 ↗
38. Crystal growth from the melt: a review
39. Rheological behaviors of sugar alcohols for low-to-medium temperature latent heat storage: effects of temperature in both the molten and supercooled liquid states10.1016/j.solmat.2019.03.006 ↗
40. Temperature-dependent rheological behaviors of binary eutectic mixtures of sugar alcohols for latent heat storage: a comparative study with pure sugar alcohols10.1007/s11630-021-1279-9 ↗
41. Effects of supercooling degree and specimen size on supercooling duration of erythritol10.2355/isijinternational.54.2790 ↗