Dopant diffusion through ultrathin AlOx and AlOx/SiOx tunnel layer in TOPCon structure and its impact on the passivation quality on c-Si solar cells
Source abstract
Abstract
Abstract A comparison study of ultrathin atomic layer deposited AlOx, wet-chemically oxidized SiOx, and their combination as the tunnel layer in TOPCon structure with both B-doped and P-doped poly-Si contact layers on n-type c-Si wafers was carried out. The passivation quality with the three types of tunnel layers was examined as a function of thickness and annealing temperature. Ideally, the high density of negative fixed charge in the AlOx is expected to provide a positive benefit on the passivation quality with p-type poly-Si as the contact layer, however, it is surprisingly observed that the AlOx and AlOx/SiOx do not yield a better passivation than the SiOx. Searching for the mechanisms behind, an interesting phenomenon is observed that the AlOx, especially the AlOx/SiOx bi-layer, significantly enhances B diffusion and suppresses P diffusion. It is also found a remarkable accumulation of B in the AlOx and AlOx/SiOx region, forming a reservoir for B diffusion. Furthermore, the free carrier assistant extrinsic diffusion is an additional factor for the enhanced B and retarded P diffusions by the AlOx/SiOx. The enhanced B diffusion causes extra Auger recombination as well as recombination through B–O pair defects and degrades the p-TOPCon passivation quality; additionally, a quantity of Al diffuse into the c-Si wafer could be another potential factor degrading passivation quality, because Al forms deep-level defects and induces a significant SRH recombination.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
2. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
3. Efficient carrier-selective p- and n-contacts for Si solar cells10.1016/j.solmat.2014.05.039 ↗
4. Tunnel oxide passivated contacts formed by ion implantation for applications in silicon solar cells10.1063/1.4936223 ↗
5. High-efficiency selective boron emitter formed by wet chemical etch-back for n-type screen-printed Si solar cells10.1063/1.4973626 ↗
6. monoPoly™ cells: large-area crystalline silicon solar cells with fire-through screen printed contact to doped polysilicon surfaces10.1016/j.solmat.2018.05.059 ↗
7. N-type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
8. 24.58 % total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
9. A strong-oxidizing mixed acid derived high-quality silicon oxide tunneling layer for polysilicon passivated contact silicon solar cell10.1016/j.solmat.2018.09.001 ↗
10. Tunnel oxide passivated carrier-selective contacts based on ultra-thin SiO2 layers10.1016/j.solmat.2015.06.048 ↗
11. Comparative study of differently grown tunnel oxides for p-type passivating contacts10.1016/j.egypro.2017.09.273 ↗
12. Comparison of different types of interfacial oxides on hole-selective p+-poly-Si passivated contacts for high-efficiency c-Si solar cells10.1016/j.solmat.2020.110487 ↗
13. Ultrathin SiO2 films on Si formed by N2O-plasma oxidation technique10.1016/0169-4332(94)90284-4 ↗
14. Passivation properties of tunnel oxide layer in passivated contact silicon solar cells10.1016/j.apsusc.2017.02.195 ↗
15. Ultrathin silicon oxide prepared by in-line plasma-assisted N2O oxidation (PANO) and the application for n-type polysilicon passivated contact10.1016/j.solmat.2019.110389 ↗
16. An industrially viable TOPCon structure with both ultra-thin SiOx and n+-poly-Si processed by PECVD for p-type c-Si solar cells10.1016/j.solmat.2019.109926 ↗
17. Material combination of Tunnel-SiO2 with a (sub-)Monolayer of ALD-AlOx on silicon offering a highly passivating hole selective contact10.1016/j.solmat.2020.110654 ↗
18. Double-sided TOPCon solar cells on textured wafer with ALD SiOx layer10.1016/j.solmat.2019.110357 ↗
19. Carrier transport through the ultrathin silicon-oxide layer in tunnel oxide passivated contact (TOPCon) c-Si solar cells10.1016/j.solmat.2018.07.025 ↗
20. Tunnel oxide passivating electron contacts as full-area rear emitter of high-efficiency p-type silicon solar cells10.1002/pip.2960 ↗
21. On the passivation mechanism of poly-silicon and thin silicon oxide on crystal silicon wafers10.1016/j.solener.2019.10.064 ↗
22. Novel schemes of p+ poly-Si hydrogenation implemented in industrial 6'' bifacial front-and-rear passivating contacts solar cells
23. Interplay of annealing temperature and doping in hole selective rear contacts based on silicon-rich silicon-carbide thin films10.1016/j.solmat.2017.06.039 ↗
24. Structure and transformation of the metastable boron- and oxygen-related defect center in crystalline silicon10.1103/PhysRevB.69.024107 ↗
25. Fundamental boron-oxygen-related carrier lifetime limit in mono- and multicrystalline silicon10.1002/pip.586 ↗
26. Ultralow surface recombination of c-Si substrates passivated by plasma-assisted atomic layer deposited Al2O310.1063/1.2240736 ↗
27. Surface passivation investigation on ultra-thin atomic layer deposited aluminum oxide layers for their potential application to form tunnel layer passivated contacts10.7567/JJAP.56.08MB14 ↗
28. Ultra-thin atomic layer deposited aluminium oxide tunnel layer passivated hole-selective contacts for silicon solar cells10.1016/j.solmat.2018.11.011 ↗
29. Passivated contacts using a highly charged AlOx dielectric dunnel dayer comparing SiOx/p+-poly-Si and SiOx/PEDOT:PSS to AlOx/p+-poly-Si and AlOx/PEDOT:PSS
30. Can interface charge enhance carrier selectivity in tunnel-layer/poly-Si passivated contacts?
31. Improvement of surface passivation of tunnel oxide passivated contact structure by thermal annealing in mixture of water vapor and nitrogen environment10.1002/solr.201900105 ↗
32. Contact resistance and methods for its determination10.1016/0040-6090(83)90577-1 ↗
33. Very low surface recombination velocities on p- and n-type c-Si by ultrafast spatial atomic layer deposition of aluminum oxide10.1063/1.3505311 ↗
34. Electronic properties of light induced recombination centers in boron doped Czochralski silicon10.1063/1.371186 ↗
35. Study of thermally induced deep levels in Al doped Si10.1063/1.323383 ↗
36. High-temperature reaction of aluminum oxide with boron in vacuum10.1007/BF01328825 ↗
37. Structural properties of Al-O monolayers in SiO2 on silicon and the maximization of their negative fixed charge density10.1021/acsami.8b06098 ↗
38. Modulation doping of silicon using aluminium-induced acceptor states in silicon dioxide10.1038/srep46703 ↗
39. Deactivation of silicon surface states by Al-induced acceptor states from Al-O monolayers in SiO210.1063/1.5054703 ↗
40. Material combination of Tunnel-SiO2 with a (sub-)Monolayer of ALD-AlOx, on silicon offering a highly passivating hole selective contact10.1016/j.solmat.2020.110654 ↗
41. Influence of layer thickness on passivation properties in SiOx/Al2O3 stacks10.1063/1.5135391 ↗
42. On the role of self-interstitials in impurity diffusion in silicon10.1063/1.327540 ↗
43. Dopant diffusion in silicon: a cosistent view involving nonequilibrium defects10.1063/1.332941 ↗
44. Diffusion of boron in heavily doped nand p-type silicon10.1063/1.336340 ↗
45. Physical models of boron diffusion in ultrathin gate oxides10.1149/1.1837473 ↗
46. Determining the defect parameters of the deep aluminum-related defect center in silicon10.1063/1.2789378 ↗