SiC-TiC nanocomposite for bulk solar absorbers applications: Effect of density and surface roughness on the optical properties
Source abstract
Abstract
Abstract In this study, the potential of SiC-TiC nano-composites as solar absorbers has been studied. For solar thermal applications, materials with high solar absorptance and low emittance are ideally sought for (spectral selectivity). A semi-molecular sol-gel synthesis route leading to nanometric homogenous composites was described. The resulting SiC-TiC nanocomposite powder was sintered at different temperatures to produce samples with various relative densities (from 57% to 96%). The samples morphology and composition were characterized by several techniques including Scanning Electron Microscopy (SEM), Energy-Dispersive X-Ray Spectroscopy (EDX), X-Ray Diffraction (XRD), carbon and oxygen elemental analyses. The link between the surface roughness and the relative density was precised and the effects on the optical properties (0.25–25 µm wavelength range) were studied. Comparisons were made with pure SiC and pure TiC samples with various relative densities. Overall, the sample emittance was found to strongly decrease with the increase in the relative density, leading to a great increase in the spectral selectivity, despite a little decrease in the solar absorptance. The TiC-SiC composite has an intermediate reflectance compared to the pure SiC and the pure TiC samples. With an absorptance of 0.76, an emittance of 0.44 and a selectivity of 1.74, the denser SiC-TiC could be a good candidate for bulk solar applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (94)
Show source-provided references
1. Solar energy materials10.1002/adma.200300378 ↗
2. A review of solar collectors and thermal energy storage in solar thermal applications10.1016/j.apenergy.2012.11.051 ↗
3. Selective surfaces for high-temperature solar photothermal conversion10.1016/0040-6090(77)90198-5 ↗
4. Selective materials for solar-energy photothermal conversion
5. Materials for photothermal solar-energy conversion10.1007/BF00700767 ↗
6. Coatings for enhanced photo thermal energy collection I. Selective absorbers10.1016/0165-1633(79)90001-7 ↗
7. Evaluation of porous silicon carbide monolithic honeycombs as volumetric receivers/collectors of concentrated solar radiation10.1016/j.solmat.2006.10.021 ↗
8. Ultra-High Temperature Ceramics for solar receivers: spectral and high-temperature emittance characterization10.2971/jeos.2012.12052 ↗
9. Spectral emittance of refractory materials10.1364/AO.3.000281 ↗
10. L. Mercatelli, M. Meucci, E. Sani, Design and test of a new facility for assessing spectral normal emittance of solid materials at high temperature, in: S. Jiang, M.J.F. Digonnet (Eds.), Optical Components and Materials, Xiii, 2016.10.1117/12.2208334 ↗
11. Facility for assessing spectral normal emittance of solid materials at high temperature10.1364/AO.54.008700 ↗
12. Optical properties of black and white ZrO2 for solar receiver applications10.1016/j.solmat.2015.02.007 ↗
13. Optical properties of boride ultrahigh-temperature ceramics for solar thermal absorbers10.1117/1.JPE.4.045599 ↗
14. Tantalum diboride-based ceramics for bulk solar absorbers10.1016/j.solmat.2014.07.012 ↗
15. Porous and dense hafnium and zirconium ultra-high temperature ceramics for solar receivers10.1016/j.optmat.2013.08.020 ↗
16. Suitability of ultra-refractory diboride ceramics as absorbers for solar energy applications10.1016/j.solmat.2012.10.004 ↗
17. Hafnium and tantalum carbides for high temperature solar receivers10.1063/1.3662099 ↗
18. Ultra-refractory ceramics for high-temperature solar absorbers10.1016/j.scriptamat.2011.07.033 ↗
19. L. Mercatelli, E. Sani, D. Jafrancesco, P. Sansoni, D. Fontani, M. Meucci, S. Coraggia, L. Marconi, J.L. Sans, E. Beche, L. Silvestroni, D. Sciti, Ultra-refractory diboride ceramics for solar plant receivers, in: Proceedings of the Solarpaces 2013 International Conference, 49 (2014) 468-477.10.1016/j.egypro.2014.03.050 ↗
20. Compositional dependence of optical properties of zirconium, hafnium and tantalum carbides for solar absorber applications10.1016/j.solener.2016.02.045 ↗
21. Optical properties of dense zirconium and tantalum diborides for solar thermal absorbers10.1016/j.renene.2016.01.068 ↗
22. Optical properties of ZrB2 porous architectures10.1016/j.solmat.2015.09.068 ↗
23. Process and composition dependence of optical properties of zirconium, hafnium and tantalum borides for solar receiver applications10.1016/j.solmat.2016.06.028 ↗
24. Titanium diboride ceramics for solar thermal absorbers10.1016/j.solmat.2017.05.038 ↗
25. High temperature oxidation of Zr- and Hf-carbides: influence of matrix and sintering additive10.1016/j.jeurceramsoc.2013.05.022 ↗
26. Microstructural characterization of ZrC-MoSi2 composites oxidized in air at high temperatures10.1016/j.apsusc.2013.07.012 ↗
27. High temperature oxidation of sintered TiC in an H2O-containing atmosphere10.1016/j.ssi.2004.02.067 ↗
28. A thermoanalytical study on the oxidation of ZrC and HfC powders with formation of carbon10.1016/S0167-2738(02)00180-7 ↗
29. The oxidation of TiC in dry oxygen, wet oxygen, and water vapor10.1023/B:JMSC.0000011514.46932.e2 ↗
30. Oxidation behavior of nano-scaled and micron-scaled TiC powders under air10.1016/j.ijrmhm.2013.07.012 ↗
31. Thermal behavior of oxidation of TiN and TiC nanoparticles10.1007/s10973-010-1214-x ↗
32. Investigation of thermal oxidation resistance of nanopowders of refractory carbides and borides, Russian10.3103/S1067821207020137 ↗
33. From colloidal precursors to metal carbides nanocomposites MC (M=Ti, Zr, Hf and Si): synthesis, characterization and optical spectral selectivity studies10.1016/j.solmat.2015.07.039 ↗
34. Fabrication and characterization of sintered TiC-SiC composites10.1016/j.jeurceramsoc.2010.10.010 ↗
35. Characterization of sintered TiC-SiC composites10.1016/j.ceramint.2009.04.022 ↗
36. In situ-toughened silicon carbide-titanium carbide composites10.1111/j.1151-2916.1996.tb08791.x ↗
37. Hot-pressing of SiC-TiC composites10.1007/BF00638050 ↗
38. Microstructure and mechanical-properties of hot-pressed SiC-TiC composites10.1007/BF01184969 ↗
39. Fabrication and mechanical evaluation of SiC-TiC nanocomposites by SPS10.1016/S0167-577X(03)00434-8 ↗
40. Mechanical properties of SiC/TiC composites by hot isostatic pressing10.1007/BF00277176 ↗
41. Improvements in mechanical-properties in SiC by the addition of TiC particles10.1111/j.1151-2916.1984.tb19174.x ↗
42. Microstructural development and mechanical-properties of SiC and SiC-TiC composites
43. Rapid reactive synthesis and sintering of submicron TiC/SiC composites through spark plasma sintering10.1111/j.1551-2916.2004.01157.x ↗
44. Effects of different sintering methods on the properties of SiC-TiC, SiC-TiB2 composites10.1016/j.ijrmhm.2017.09.005 ↗
45. Suitability of ultra-refractory diboride ceramics as absorbers for solar energy applications10.1016/j.solmat.2012.10.004 ↗
46. Tantalum diboride-based ceramics for bulk solar absorbers10.1016/j.solmat.2014.07.012 ↗
47. Lanthanum hexaboride for solar energy applications10.1038/s41598-017-00749-w ↗
48. Femtosecond laser treatments to tailor the optical properties of hafnium carbide for solar applications10.1016/j.solmat.2014.09.037 ↗
49. Effect of surface texturing by femtosecond laser on tantalum carbide ceramics for solar receiver applications10.1016/j.solmat.2016.10.054 ↗
50. Directional selectivity, emittance and absorptance properties of eve corrugated specular surfaces10.1016/0038-092X(63)90036-7 ↗
51. E.G. Acheson, Manufacture of graphite, Google Patents, 1896.
52. Synthesis of refractory-metal carbide powders via microwave carbothermal reduction10.1016/0263-4368(95)00035-H ↗
53. Carbothermal reduction synthesis of nanocrystalline zirconium carbide and hafnium carbide powders using solution-derived precursors10.1023/B:JMSC.0000041702.76858.a7 ↗
54. Low-temperature synthesis of sinterable SiC powders by carbothermic reduction of colloidal SiO210.1007/BF00540693 ↗
55. The effects of starting precursors on the carbothermal synthesis of SiC powders10.1016/S0272-8842(02)00091-3 ↗
56. Synthesis of nanocrystalline silicon carbide powder by carbothermal reduction10.1016/S0955-2219(98)00094-6 ↗
57. Effect of boric-acid addition in colloidal sol-gel derived SiC precursors10.1016/0025-5408(90)90026-X ↗
58. Production of fine, high-purity beta silicon-carbide powders10.1111/j.1151-2916.1992.tb05460.x ↗
59. Comparison of two soft chemistry routes for the synthesis of mesoporous carbon/beta-SiC nanocomposites10.1007/s10853-013-7222-z ↗
60. M. Coulibaly, Carbures nanocomposites issus de précurseurs sol-gel et impacts sur la sélectivité optique Montpellier, 2015.
61. Synthesis of TiC via polymeric titanates - the preparation of fibres and thin-films10.1007/BF00541573 ↗
62. Synthesis of high-surface-area SiC through a modified sol-gel route: control of the pore structure10.1021/ie034244e ↗
63. In situ synthesis of ZrC/SiC nanocomposite via carbothermic reduction of binary xerogel10.1016/j.jallcom.2014.05.180 ↗
64. Synthesis of mesoporous carbon-bonded TiC/SiC composites by direct carbothermal reduction of sol-gel derived monolithic precursor10.1111/j.1551-2916.2011.04662.x ↗
65. Preparation of titanium carbide powders by sol-gel and microwave carbothermal reduction methods at low temperature10.1007/s10971-008-1697-0 ↗
66. The thermal-conversion of poly(silylene)-diacetylene metal-oxide composites - A new approach to beta-SiC-MC ceramics10.1002/anie.199211951 ↗
67. Ceramics and nanostructures from molecular precursors10.1002/(SICI)1521-3773(20000417)39:8<1376::AID-ANIE1376>3.0.CO;2-S ↗
68. From preceramic polymers with interpenetrating networks to SiC/MC nanocomposites10.1021/cm991140e ↗
69. X. Deschanels, M. El Ghazzal, C. Delchet, D. Herault, V. Magnin, A. Grandjean, R. Podor, G. Cerveau, T. Zemb, R. Corriu, Synthesis of carbide compounds derived from colloidal oxide and carbohydrate, in: S. Bucak (Ed.), Trends in Colloid and Interface Science, Xxiii, 2010, pp. 47–52.10.1007/978-3-642-13461-6_10 ↗
70. Synthesis of titanium carbide nanoparticles with a high specific surface area from a TiO2 core-sucrose shell precursor10.1111/j.1551-2916.2009.03243.x ↗
71. Synthesis and evolution of zirconium carbide via solgel route: features of nanoparticle oxidecarbon reactions10.1111/jace.12260 ↗
72. The effects of carboxylic acids on the aqueous dispersion and electrophoretic deposition of ZrO210.1016/j.jeurceramsoc.2011.08.015 ↗
73. Chemical modification of titanium isopropoxide for producing stable dispersion of titania nano-particles10.1016/j.matchemphys.2014.11.065 ↗
74. Citric acid adsorption on TiO2 nanoparticles in aqueous suspensions at acidic and circumneutral pH: surface coverage, surface speciation, and its impact on nanoparticle-nanoparticle interactions10.1021/ja106091q ↗
75. Thermal-decomposition of citric-acid10.1016/0040-6031(86)87081-2 ↗
76. Thermal behaviour of citric acid and isomeric aconitic acids10.1007/s10973-010-1015-2 ↗
77. Dsc studies on the decomposition of chemical blowing agents based on citric acid and sodium bicarbonate10.1016/j.tca.2017.11.007 ↗
78. Mechanical behaviour at high temperature of spark plasma sintered boron carbide ceramics10.1016/j.ceramint.2017.02.053 ↗
79. New approach of the evolution of densification mechanisms during Spark Plasma Sintering: application to zirconium (oxy-)carbide ceramics10.1016/j.scriptamat.2015.01.028 ↗
80. T. Roisnel, J. Rodriguez-Carvajal, WinPLOTR: A Windows tool for powder diffraction pattern analysis, Epdic 7: European Powder Diffraction, Pts 1 and 2 378-3 118-123, 2001.10.4028/www.scientific.net/MSF.378-381.118 ↗
81. Recent advances in magnetic-structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
82. Pressureless sintering behavior and mechanical properties of ZrB2-SiC composites: effect of SiC content and particle size10.1016/j.jmrt.2015.02.004 ↗
83. Effect of MoSi2 addition and particle size of SiC on pressureless sintering behavior and mechanical properties of ZrB2-SiC-MoSi2 composites10.1016/j.jmrt.2015.10.003 ↗
84. Effect of pressure and temperature on densification, microstructure and mechanical properties of spark plasma sintered silicon carbide processed with beta-silicon carbide nanopowder and sintering additives10.1016/j.ceramint.2015.11.048 ↗
85. Effect of particle size distribution on SiC ceramic sinterability10.2320/matertrans.Y-M2015823 ↗
86. Densification of additive-free polycrystalline beta-SiC by spark-plasma sintering10.1016/j.ceramint.2011.06.036 ↗
87. Structural studies of TiC1-xOx solid solution by Rietveld refinement and first-principles calculations10.1016/j.jssc.2013.05.009 ↗
88. Incorporation effects of Si in TiCx thin films10.1016/j.surfcoat.2014.08.064 ↗
89. Novel insight into the chemical analysis of light elements in oxycarbides10.1016/j.actamat.2018.07.023 ↗
90. Experimental methods for the preparation of selectively absorbing textured surfaces for photo thermal solar conversion10.1016/0165-1633(80)90028-3 ↗
91. Optical cavity for improved performance of solar receivers in solar-thermal systems10.1016/j.solener.2014.06.023 ↗
92. Flexible SiC/Si3N4 composite nanofibers with in situ embedded graphite for highly efficient electromagnetic wave absorption10.1021/acsami.7b05382 ↗
93. One-dimensional carbon/SiC nanocomposites with tunable dielectric and broadband electromagnetic wave absorption properties10.1016/j.carbon.2017.09.052 ↗
94. Compositional dependence of optical properties of zirconium, hafnium and tantalum carbides for solar absorber applications10.1016/j.solener.2016.02.045 ↗