journal article·2009-02

Effect of bath temperature and annealing on the formation of CuInSe2

M. Benaicha, N. Benouattas, C. Benazzouz, L. Ouahab

Publisher page

Abstract

Abstract CuInSe 2 films of 2 μm thickness were electrodeposited potentiostatically, from aqueous solution containing thiocyanate as a complexing agent, on Mo substrates. For all the experiments, the potential of the potentiostatic deposition of the materials was chosen to be −1 V, whereas the bath temperature of electrolyte was varied from 20 to 80 °C. It was found that the electrodeposited CuInSe 2 was characterized by an amorphous layer and densely-packed nanometric grains with a good homogeneity. After vacuum annealing at 200 °C, glancing angle X-ray diffraction revealed the presence of the CuInSe 2 phase whereas annealing under selenium atmosphere lead to the growth of molybdenum selenide compound MoSe 2 , in addition to a better crystallization of the copper indium diselenide compound. Scanning electron microscopic revealed that despite an increase in the grains dimensions, there was no significant change in the films surface morphology when the bath temperature was varied from 20 to 80 °C. At the same time, the composition of the electrodeposited Cu–In–Se layers becomes richer in copper. This increase in copper concentration is mainly compensated by a deficit in selenium atoms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Electrodeposition and characterization of CulnSe2 thin films10.1149/1.2048675 ↗
2. Improvement of the optical properties of electrodeposited CuInSe2 thin films by thermal and chemical treatments10.1016/0927-0248(95)00163-8 ↗
3. Influence of morphology and structure of Cu/In alloys on the properties of CuInSe2 for thin film solar cells10.7567/JJAPS.32S3.80 ↗
4. Spray pyrolysis of CulnSe210.1016/0379-6787(86)90085-2 ↗
5. Electrical properties and structural changes of thermally co-evaporated CuInSe films10.1016/S0169-4332(00)00836-9 ↗
6. Preparation and study of structural and optical properties of chemical bath deposited. Copper indium diselenide thin films10.1002/1521-396X(200205)191:1<149::AID-PSSA149>3.0.CO;2-F ↗
7. Electrodeposition of CuInSe2 thin films from aqueous solution10.1016/0165-1633(89)90063-4 ↗
8. Preparation of polycrystalline thin films of CulnSe2 by electrodeposition10.1007/BF01015237 ↗
9. Preparation and characterization of electrodeposited CuInSe2 thin films10.1016/S0151-9107(98)80095-0 ↗
10. A voltammetric study of the electrodeposition of CuInSe2 in a citrate electrolyte10.1016/S0040-6090(01)01720-5 ↗
11. Investigation of the electrodeposition process in the Cu–In–Se system10.1016/0927-0248(93)90048-8 ↗
12. Elektroden, ionenselektive; Herstellung homogener untersucht10.1016/S0022-0728(79)80390-3 ↗
13. Formation of copper indium diselenide by electrodeposition10.1016/0022-0728(94)03352-8 ↗
14. Junction formation studies of one-step electrodeposited CuInSe2 on CdS10.1149/1.1391578 ↗
15. One step electrodeposition of CuInSe2 thin films
16. Electrodeposition of chalcopyrite films from ionic liquid electrolytes10.1016/j.tsf.2006.12.092 ↗
17. Thin film deposition methods for CulnSe2 solar cells10.1080/10408430590918341 ↗
18. Electrodeposition of CuInSe2 thin films onto Mo-glass substrates10.1016/j.tsf.2005.11.075 ↗
19. Preparation and structure of annealed CuInSe2 electrodeposited films10.1016/S0040-6090(97)00263-0 ↗
20. Electrodeposited semiconducting CuInSe2 films: preparation
21. Electrical characterization of Cu (In, Ga)Se2 thin film solar cells and the role of defects for the device performance10.1016/S0927-0248(00)00273-7 ↗
22. Characterization of the Cu(In,Ga)Se2Mo interface in CIGS solar cells10.1016/S0040-6090(00)01846-0 ↗
23. CuInSe2 thin films obtained by a novel electrodeposition and sputtering combined method10.1016/S0042-207X(00)00355-9 ↗
24. The role of structural properties and defects for the performance of Cu-chalcopyrite-based thin-film solar cells10.1016/S0921-4526(01)00863-8 ↗