Development of a-Si:H/c-Si heterojunctions for the i2-module concept: Low-temperature passivation and emitter formation on wafers bonded to glass
Source abstract
Abstract
With crystalline silicon technology around in commercial products for over 30 years and still dominating the PV market for the foreseeable future, it is important to consider how this technology can be improved to cope with the increasing demand for lower cost. This paper builds on a concept proposed by imec, integrated-interconnect-module (i2-module), to merge current crystalline silicon cell and module technology with module-level thin-film technology. It investigates, in particular, how hydrogenated amorphous silicon (a-Si:H) layers can be deposited on wafers that are bonded to a glass superstrate, to provide a low-temperature (heterojunction) approach for passivation and emitter formation in this concept. First, the concept is introduced, together with its context and motivation for a-Si:H heterojunctions. Then, the experiments are described. Starting from screening trials on temporarily and permanently bonded wafers, the plasma-enhanced chemical vapor deposition (PECVD) a-Si:H deposition process is optimized by shielding the adhesive from the plasma, resulting in comparable surface passivation quality between bonded samples and standalone wafers. Finally, first attempts toward integration into solar cell devices are reported, resulting into efficiencies above 18%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Crystalline thin-foil silicon solar cells: where crystalline quality meets thin-film processing10.1002/pip.1238 ↗
2. J. Wohlgemuth, et al., Large-Scale PV Module Manufacturing Using Ultrathin Polycrystalline Silicon Solar Cells, Department of Energy Laboratory, National Renewable Energy Laboratory, Golden, CO, Annual Report ZDO-2-30628-03, March 2005.
3. Back-contact solar cells: a review,10.1002/pip.657 ↗
4. Developing an advanced module for back-contact solar cells10.1109/TCPMT.2011.2161082 ↗
5. Crystalline silicon photovoltaics: a cost analysis framework for determining technology pathways to reach baseload electricity costs10.1039/c2ee03489a ↗
6. J. Govaerts, et al., Progress in i-module: towards improved performance, reliability and module-level fabrication technologies for back-contact PV modules based on ultra-thin silicon solar cells, in: Proceedings of the 26th EUPVSEC, Hamburg, September 2011, pp. 69–72.
7. M. Aleman, et al., Development and integration of a high-efficiency baseline leading to 23% IBC cells, in: Proceedings of the 2nd SiliconPV, Leuven, April 2012.10.1016/j.egypro.2012.07.122 ↗
8. W.P. Mulligan, et al., Manufacture of solar cells with 21% efficiency, in: Proceedings of the 19th EUPVSEC, Paris, September 2004, pp. 387–390.
9. Laser-assisted selective emitters and the role of laser doping
10. A. Safiei, et al., Generation of defect-related acceptor states by laser doping, in: Proceedings of the 2nd SiliconPV, Leuven, April 2012.10.1016/j.solmat.2012.06.045 ↗
11. H. Sakata, et al., R&D progress of next-generation very thin HIT solar cells, in: Proceedings of the 25th EUPVSEC, Valencia, September 2010, pp. 1102–1105.
12. J. L. Hernández, et al., High efficiency silver-free heterojunction silicon solar cell, in: Proceedings of the 21st Asian PVSEC, Kanagawa, November 2011.
13. N. Wyrsch, et al., New paradigm for real-time measurement and mapping in a-Si:H/μc-Si:H tandem devices, in: Proceedings of the 25th EUPVSEC, Valencia, September 2010, pp. 3311–3314.
14. A. Jourdain, 300mm wafer thinning and backside passivation compatibility with temporary wafer bonding for 3D stacked IC applications, in: Proceedings of the 3DIC, Munich, November 2010, pp. 1–4.10.1109/3DIC.2010.5751468 ↗
15. B. Ketola, et al., Silicones for photovoltaic encapsulation, in: Proceedings of the 23rd EUPVSEC, Valencia, September 2008, pp. 2969–2973.
16. B. Ketola, et al., Demonstration of the benefits of silicone encapsulation of PV modules in a large scale outdoor array, in: Proceedings of the 25th EUPVSEC, Valencia, September 2010, pp. 4060–4063.
17. Briggs · 2003
18. Simplified evaluation method for light-biased effective lifetime measurements10.1063/1.119401 ↗
19. Improved QSS-μPCD measurement with quality of decay control: correlation with steady-state carrier lifetime10.1016/j.solmat.2012.05.040 ↗
20. A. vanleenhove, et al., Thin-film polycrystalline-silicon solar mini-modules on non-silicon substrates, in: Proceedings of the 25th EUPVSEC, Valencia, September 2010, pp. 3626–3629.
21. F. Dross, et al., Cell-module integration concept compatible with c-Si epitaxial thin foils and with efficiencies over 18%, in: Proceedings of the 27th EUPVSEC, Frankfurt, September 2012, pp. 2207–2211.
22. F. Dross, et al., Over 18% efficiency IBC cell with rear-surface processed in superstrate configuration, IEEE Journal of Photovoltaics 10.1109/JPHOTOV.2013.2239359, in press10.1109/JPHOTOV.2013.2239359 ↗