journal article·2022-05

Evaluation of flow accelerated corrosion and mechanical performance of martensitic steel T91 for a ternary mixture of molten salts for CSP plants

Abdiel Mallco, Fabiola Pineda, Magin Mendoza, Mauro Henriquez, Claudia Carrasco, Victor Vergara, Edward Fuentealba, Angel G. Fernandez

Publisher page

Abstract

Thermal energy storage (TES) systems with molten salts involve different operating conditions causing corrosion problems in the materials due to the high operating temperature. In this work, the corrosion behavior was studied by means of flow accelerated corrosion (FAC) and static corrosion tests in contact with the ternary mixture (KLiNa)NO 3 at 550 °C. Both tests were performed by gravimetric tests (mass gain) and subsequently characterized by SEM and XRD. The results showed a substantial increase in mass gain due to the dynamic effect of the FAC test in relation to the stationary test. Consequently, the dynamic effect of the FAC test at high temperatures could cause stress corrosion cracking in the material, leading to a change in the mechanical performance of T91 steel. Therefore, the slow strain rate tensile test (SSRT) on molten salts was performed to evaluate the impact of temperature on the mechanical property performance of the material. A considerable reduction in the mechanical performance of the material was observed compared to testing the material in air under normal conditions. This research shows the real operating conditions under the corrosion effect of T91 steel and its relevance as a material for the solar thermal industry.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Nanofluid Flow and Heat Transfer · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. A review of renewable energy sources, sustainability issues and climate change mitigation10.1080/23311916.2016.1167990 ↗
2. Yogi Goswami
3. Corrosion ability of a novel heat transfer fluid for energy storage in CSP plants10.1007/s11085-014-9494-3 ↗
4. C · 2016 · 1–66
5. Corrosion properties of a ternary nitrate/nitrite molten salt inconcentrated solar technology10.1016/j.renene.2015.01.072 ↗
6. High-temperature phase change materials for thermal energy storage10.1016/j.rser.2009.11.011 ↗
7. Denholm · 2011
8. Technical challenges and opportunities for concentrating solar power with thermal energy storage10.1115/1.4024143 ↗
9. Stable molten salts hold the key to solar storage
10. Air-stable, earth-abundant molten chlorides and corrosion-resistant containment for chemically-robust, high-temperature thermal energy storage for concentrated solar power10.1016/j.mattod.2021.02.015 ↗
11. Materials corrosion for thermal energy storage systems in concentrated solar power plants10.1016/j.rser.2018.01.010 ↗
12. High-temperature molten salts for solar power application
13. Concentrated solar power plants with molten salt storage: economic aspects and perspectives in the European union10.1155/2019/8796814 ↗
14. Lithium nitrate purity influence assessment in ternary molten salts as thermal energy storage material for CSP plants10.1016/j.renene.2019.10.075 ↗
15. Henríquez
16. Corrosion mechanisms in molten salt thermal energy storage for concentrating solar power10.1016/j.rser.2019.109328 ↗
17. High-temperature corrosion of Cr-Mo steel in molten LiNO3-NaNO3-KNO3 eutectic salt for thermal energy storage10.1016/j.solmat.2014.10.007 ↗
18. Corrosion of stainless steels and carbon steel by molten mixtures of commercial nitrate salts10.1361/10599490417542 ↗
19. Corrosion mechanisms of ferritic-martensitic P91 steel and Inconel 600 nickel-based alloy in molten chlorides. Part I: NaCl–KCl binary system10.1016/j.solmat.2020.110659 ↗
20. Corrosion mechanisms of ferritic-martensitic P91 steel and Inconel 600 nickel-based alloy in molten chlorides. Part II: NaCl-KCl-MgCl2 ternary system10.1016/j.solmat.2020.110675 ↗
21. Electrochemical impedance spectroscopy (EIS): an efficient technique for monitoring corrosion processes in molten salt environments in CSP applications10.1016/j.solmat.2018.11.007 ↗
22. High temperature molten salt corrosion behavior of aluminide and nickel-aluminide coatings for heat storage in concentrated solar power plants10.1016/j.surfcoat.2018.05.081 ↗
23. Protective coatings for high temperature molten salt heat storage systems in solar concentration power plants10.1063/1.5067095 ↗
24. Improvement of the corrosion properties in ternary molten nitrate salts for direct energy storage in CSP plants10.1016/j.solener.2016.05.030 ↗
25. Corrosion behavior of stainless and low-chromium steels and IN625 in molten nitrate salts at 600 °C10.1016/j.solmat.2015.08.011 ↗
26. Corrosion resistance of protective coatings against molten nitrate salts for thermal energy storage and their environmental impact in CSP technology10.1016/j.solener.2018.10.083 ↗
27. Flow-accelerated corrosion of pressure vessels in fossil plants10.1016/S0308-0161(99)00087-3 ↗
28. Flow accelerated corrosion in nuclear power plants10.5772/2580 ↗
29. Influence of velocity on corrosion of copper in alkaline chloride solutions10.5006/1.3294336 ↗
30. Erosion-corrosion of 2205 duplex stainless steel in flowing seawater containing sand particles10.1016/j.corsci.2006.08.023 ↗
31. Effect of impact angle on the slurry erosion-corrosion of 304L stainless steel10.1016/S0043-1648(00)00344-6 ↗
32. The corrosion of carbon steel in oil-in-water emulsions under controlled hydrodynamic conditions10.1016/S0010-938X(99)00068-2 ↗
33. Dynamic corrosion behavior of 316L stainless steel in quaternary nitrate-nitrite salts under different flow rates10.1016/j.solmat.2020.110821 ↗
34. Long-term material tests in liquid molten salts
35. The slow strain rate stress corrosion cracking test-a 50 year retrospective10.5006/2137 ↗
36. Mechanical properties and phases evolution in T91 steel during long-term high-temperature exposure10.1016/j.engfailanal.2020.104451 ↗
37. Flow accelerated corrosion (FAC) in boilers/HRSGs
38. Experimental research of high temperature dynamic corrosion characteristic of stainless steels in nitrate eutectic molten salt10.1016/j.solener.2020.09.034 ↗
39. Effect of welding thermal cycles on the structure and properties of simulated heat-affected zone areas in X10CrMoVNb9-1 (T91) steel at a state after 100,000 h of operation10.1016/j.msea.2015.04.009 ↗
40. High temperature corrosion behavior on molten nitrate salt-based nanofluids for CSP plants10.1016/j.renene.2018.07.018 ↗
41. Deformation behaviour in advanced heat resistant materials during slow strain rate testing at elevated temperature10.1063/2.1404104 ↗
42. Thermomechanical testing under operating conditions of A516Gr70 used for CSP storage tanks10.1016/j.solmat.2017.09.029 ↗