journal article·2022-01

Evaluation of thermal/morphological performance of SSPCM based nanoclay: Influence of the interlayer microstructure of hydrophilic and hydrophobic

Jihee Nam, Sungwoong Yang, Beom Yeol Yun, Sumin Kim

Publisher page

Abstract

Abstract The COVID-19 pandemic has led to an increase in construction energy consumption and indoor occupancy; this, in turn, has increased the demand for energy efficiency. Thermal energy storage is an effective method for energy saving and improving efficiency. In this study, improved shape-stabilized phase change materials (SSPCMs) for enhancing the energy efficiency of buildings were manufactured and evaluated. These SSPCMs were prepared via the vacuum impregnation of n-octadecane into bentonite nanoclay. Bentonite exhibits a layered tetrahedral and octahedral crystal structure with Na+ cations (which feature high cation exchange capacity) in the interlayer space. The Na+ ion is a hydrophilic ion that affects the properties of the interlayer. However, paraffin-PCMs are hydrophobic and have poor compatibility with water. Therefore, hydrophobicity is induced in the organic nanoclay by using an organic modifier as the PCM container. Cloisite Na+, Cloisite 15, Cloisite 20, and Cloisite 93 were used to fabricate the SSPCMs. This study compares the amount of PCM impregnated depending on the compatibility of different PCMs between hydrophilic/hydrophobic nanoclays and also evaluates the thermal performance. The observed reduction in peak temperature and the time lag effect of the PCMs confirmed that the organically modified nanoclay and the PCM composites significantly improved the amount of PCM impregnated, thermal conductivity, and latent heat characteristics. The latent heat of the hydrophobic organic nanoclay was 209% higher than that of the SSPCM-based hydrophilic nanoclay.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Impact of façade design on indoor air temperatures and cooling loads in residential buildings in the tropical climate10.1016/j.enbuild.2021.110972 ↗
2. Preparation and characterization of methyl palmitate/palygorskite composite phase change material for thermal energy storage in buildings10.1016/j.conbuildmat.2019.07.152 ↗
3. Heating and cooling energy trends and drivers in buildings10.1016/j.rser.2014.08.039 ↗
4. A review on phase change materials integrated in building walls10.1016/j.rser.2010.08.019 ↗
5. Development of thermal enhanced n-octadecane/porous nano carbon-based materials using 3-step filtered vacuum impregnation method10.1016/j.tca.2017.06.013 ↗
6. Latent heat storage biocomposites of phase change material-biochar as feasible eco-friendly building materials10.1016/j.envres.2019.01.058 ↗
7. Experimental evaluation of a hybrid photovoltaic and thermal solar energy collector with integrated phase change material (PVT-PCM) in comparison with a traditional photovoltaic (PV) module10.1016/j.renene.2021.03.022 ↗
8. Capabilities of α-Al2O3, γ-Al2O3, and bentonite dry powders used in flat plate solar collector for thermal energy storage10.1016/j.renene.2021.04.026 ↗
9. Climatic cycling assessment of red clay/perlite and vermiculite composite PCM for improving thermal inertia in buildings10.1016/j.buildenv.2019.106464 ↗
10. Elaboration and properties of a composite bio-based PCM for an application in building envelopes10.1016/j.conbuildmat.2018.07.098 ↗
11. Peak load shifting using a price-based control in PCM-enhanced buildings10.1016/j.solener.2020.09.016 ↗
12. Thermal energy charging behaviour of a heat exchange device with a zigzag plate configuration containing multi-phase-change-materials (m-PCMs)10.1016/j.apenergy.2014.12.050 ↗
13. Indoor thermal comfort assessment using PCM based storage system integrated with ceiling fan ventilation: experimental design and response surface approach10.1016/j.enbuild.2019.02.020 ↗
14. Solar Energy Materials and Solar Cells Numerical simulation on the efficiency of PVT system integrated with PCM under the influence of using fins10.1016/j.solmat.2021.111402 ↗
15. Mathematical modelling and sensitivity analysis of solar photovoltaic panel integrated with phase change material10.1016/j.apenergy.2018.06.145 ↗
16. Increasing the electrical efficiency and thermal management of a photovoltaic module using expanded graphite (EG)/paraffin-beef tallow-coconut oil composite as phase change material10.1016/j.renene.2021.06.067 ↗
17. Application of a phase-change material to improve the electrical performance of vertical-building-added photovoltaics considering the annual weather conditions10.1016/j.solener.2014.04.020 ↗
18. Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: a review and outlook10.1016/j.rser.2014.12.003 ↗
19. A simplified mathematical model for transient simulation of thermal performance and energy assessment for active facades10.1016/j.enbuild.2015.07.007 ↗
20. Passive/active photovoltaic-thermal (PVT) system implementing infiltrated phase change material (PCM) in PS-CNT foam10.1016/j.solmat.2020.110942 ↗
21. Application of phase change material foam composites in the built environment: a critical review10.1016/j.rser.2020.110008 ↗
22. Enhanced thermophysical properties of organic PCM through shape stabilization for thermal energy storage in buildings: a state of the art review10.1016/j.enbuild.2021.110799 ↗
23. Jeong · J. Adhes. Sci. Technol. · 2017 · 31 · 29710.1080/01694243.2016.1215011 ↗
24. Preparation of energy efficient paraffinic PCMs/expanded vermiculite and perlite composites for energy saving in buildings10.1016/j.solmat.2014.11.001 ↗
25. Preparation and characterization of isopropyl palmitate/expanded perlite and isopropyl palmitate/nanoclay composites as form-stable thermal energy storage materials for buildings10.1016/j.est.2020.101679 ↗
26. Calcium bentonite vs sodium bentonite: the potential of calcium bentonite for soil foundation
27. Characterization of organo-montmorillonite (OMMT) modified wood flour and properties of its composites with poly(lactic acid)10.1016/j.compositesa.2013.03.019 ↗
28. Effect of organo-modified montmorillonite nanoclay on mechanical, thermal and ablation behavior of carbon fiber/phenolic resin composites
29. Caprylic acid based PCM composite with potential for thermal buffering and packaging applications10.1016/j.matchemphys.2020.123453 ↗
30. Preparation and thermophysical performance of diatomite-based composite PCM wallboard for thermal energy storage in buildings10.1016/j.jobe.2020.101753 ↗
31. High latent heat storage and high thermal conductive phase change materials using exfoliated graphite nanoplatelets10.1016/j.solmat.2008.09.010 ↗
32. 2013
33. 2017
34. 2013
35. Energy performance evaluation of heat-storage gypsum board with hybrid SSPCM composite10.1016/j.jiec.2017.03.007 ↗
36. Carbon nanotube/paraffin/montmorillonite composite phase change material for thermal energy storage10.1016/j.solener.2017.02.003 ↗
37. Energy efficient thermal storage montmorillonite with phase change material containing exfoliated graphite nanoplatelets10.1016/j.solmat.2015.03.010 ↗
38. Thermal performance enhancement of mortar mixed with octadecane/xGnP SSPCM to save building energy consumption10.1016/j.solmat.2013.12.015 ↗