Black zirconia composites with enhanced thermal, optical and mechanical performance for solar energy applications
Source abstract
Abstract
Abstract This work discusses developing new black zirconia (ZrO2) composites with high efficiency and optimal properties as a volumetric solar receiver via low cost processing. The major aim is optimizing a new high temperature material with high durability, optical and thermal properties for solar energy applications. This was achieved by blackening of zirconia and producing black zirconia composites through addition of Fe2O3 and MnO2 instead of using coating. Fe2O3 is added to the white zirconia with different content (0–30 wt%) to promote its dark color and enhance its properties. 5 wt% MnO2 is added to assist the blackening and the sintering processes. The different ZrO2/Fe2O3 (0–30 wt%)/MnO2 composites are produced by pressureless sintering method at a temperature of 1700 °C for 2 hrs. Optical, thermal and mechanical performances of the obtained composites are optimized to ensure its suitability and sustainability as solar absorber material. Results indicated that highly dense composites with homogenous microstructural features are attained. Increment of Fe2O3 content has a substantial effect on promoting the thermal and solar to thermal efficiencies of the obtained composites. Composite with 30 wt % Fe2O3 showed the highest solar absorbance in the UV, visible and near IR regions. It recorded the best light emission efficiency with the highest photoluminescence performance. Black ZrO2/Fe2O3/MnO2 composites could be a promising candidate as solar receiver material for thermal solar plants than other reported carbide and nitride materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. High porosity materials as volumetric receivers for solar energetics
2. Densification and characterization of SiC-AlN composites for solar energy applications10.1016/j.renene.2018.05.100 ↗
3. Porous materials as open volumetric solar receivers: experimental determination of thermophysical and heat transfer properties10.1016/S0360-5442(03)00188-9 ↗
4. Two novel high porosity materials as volumetric receiver for concentrated solar radiation10.1016/j.solmat.2004.01.039 ↗
5. Investigation of microstructure and mechanical strength of SiC/AlN composites processed under different sintering atmospheres10.1016/j.jallcom.2018.05.020 ↗
6. Thermal shock resistance of pressureless sintered SiC/AlN ceramic composites10.1088/2053-1591/aaa2c2 ↗
7. Hafnium and tantalum carbides for high temperature solar receivers10.1063/1.3662099 ↗
8. Ultra-refractory ceramics for high-temperature solar absorbers10.1016/j.scriptamat.2011.07.033 ↗
9. Suitability of ultra-refractory diboride ceramics as absorbers for solar energy applications10.1016/j.solmat.2012.10.004 ↗
10. Porous and dense hafnium and zirconium ultra-high temperature ceramics for solar receivers
11. Evaluation of porous silicon carbide monolithic honeycombs as volumetric receivers/collectors of concentrated solar radiation
12. Alumina-mullite-zirconia composites obtained by reaction sintering'' Part I: microstructure and mechanical behaviour10.1023/A:1004743001686 ↗
13. Mechanical properties of ultra-fine grained zirconia ceramics10.1007/BF00541576 ↗
14. Structure and electrical levels of point defect in monoclinic zirconia10.1103/PhysRevB.64.224108 ↗
15. Influence of crystallite size on the properties of zirconia10.1021/cm980705o ↗
16. Optical properties of black and white ZrO2 for solar receiver applications10.1016/j.solmat.2015.02.007 ↗
17. Preparation and characterization of black zirconia ceramics by black color spinel pigment10.4191/KCERS.2008.45.4.214 ↗
18. Fujisaki H., (2009) Powder for Black Zirconia Sintered Body, Production Method Thereof, and Sintered Body Thereof, US Patent, No: US7553, 789 B2.
19. Wang · J. Mater. Chem. · 2020 · 1
20. Electrically conductor black zirconia ceramic by SPS using graphene oxide
21. Nearly total solar absorption in ultrathin nanostructured iron oxide for efficient photoelectrochemical water splitting10.1021/ph4001026 ↗
22. Fe2O3 films on stainless steel for solar absorbers10.1016/j.rser.2015.12.263 ↗
23. Preparation of NIR reflective Brown pigment10.1016/j.proeng.2012.02.029 ↗
24. Dispersion of Fe2O3 supported on metal oxides studied by Mssbauer spectroscopy and XRD10.1039/a700110j ↗
25. Metal oxide–support interactions in Fe/ZrO2 catalysts10.1021/jp994122t ↗
26. Influence of Fe doping on magnetic properties of ZrO2 nanocrystals10.1016/j.jallcom.2015.01.257 ↗
27. Structural and magnetic properties of iron doped ZrO210.1016/j.jallcom.2016.04.170 ↗
28. Fabrication and characteristics of SiC–AlN alloys10.1007/BF00586311 ↗
29. Phase relationships in the silicon carbide-aluminum nitride system10.1111/j.1151-2916.1988.tb07541.x ↗
30. Growth of 1 solid solutions of aluminum nitride and silicon carbide by metal organic chemical vapor deposition10.1016/0022-0248(93)90351-V ↗
31. Solid solutions of AlN and SiC grown by plasma-assisted, gas-source molecular beam epitaxy”10.1557/JMR.1993.1477 ↗
32. Synthesis of AlN-SiC composites and solid solutions by field-activated self-propagating combustion10.1016/S0955-2219(97)00075-7 ↗
33. Reactive synthesis and phase stability investigations in the aluminum nitride–silicon carbide system10.1111/j.1151-2916.2000.tb01338.x ↗
34. Test method for water absorption, bulk density, apparent porosity and apparent specific gravity of white ware products
35. Test method for cold crushing strength of advanced ceramics
36. Twenty-five years after introduction of automotive catalysts: what next?10.1016/S0920-5861(00)00407-7 ↗
37. Automotive catalytic converters: current status and some perspectives10.1016/S0920-5861(02)00384-X ↗
38. Structural characterization and catalytic activity of molybdenum oxide supported zirconia catalysts10.1016/j.micromeso.2006.12.037 ↗
39. Structure and catalytic properties of molybdenum oxide catalysts supported on zirconia10.1016/j.jcat.2004.04.028 ↗
40. Combustion synthesized WO3–ZrO2 nanocomposites as catalyst for the solvent-free synthesis of coumarins10.1016/j.colsurfa.2007.10.019 ↗
41. Synthesis of MnFeO3 from the oxidative thermal decomposition of Mn[Fe(CN)5NO]·2H2O
42. A 3D photothermal structure toward improved energy efficiency in solar steam generation10.1016/j.joule.2018.03.013 ↗
43. Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis10.1039/D0RA01809K ↗
44. Densification of zirconia-hematite nanopowders10.1016/S0955-2219(02)00272-8 ↗
45. Tailoring of functionally graded zirconia–mullite/alumina ceramics10.1016/j.jeurceramsoc.2012.01.016 ↗
46. Alper · 1970
47. Phase stability of zirconia
48. Axial thermal expansion of ZrO2 and HfO2 in the range room temperature to 1400°C10.1107/S0021889869007217 ↗
49. Physical properties of iron-oxide scales on Si-containing steels at high temperature10.2320/matertrans.M2009097 ↗
50. A new method for synthesis of FeMnO3 ceramics and its phase transformation10.4028/www.scientific.net/JNanoR.37.122 ↗
51. Kuszyk · J. Am. Ceram. Soc. · 1973 · 56 · 42010.1111/j.1151-2916.1973.tb12714.x ↗
52. Buessem · Ceram. Age · 1952 · 60 · 38
53. Bush · J. Am. Ceram. Soc. · 1959 · 42 · 38810.1111/j.1151-2916.1959.tb13597.x ↗
54. Internal ruptures and recombinations in anisotropic ceramic materials, 31 mechanical properties of engineering ceramics
55. Fe2O3 films on stainless steel for solar absorbers
56. Coatings of Fe3O4 nanoparticles as selective solar absorber10.2174/1876531901103010131 ↗
57. Review: monoclinic zirconia, its surface sites and their interaction with carbon monoxide10.1039/C5CY00330J ↗
58. Thermophysical properties and sintering of ytterbia-stabilized tetragonal zirconia ceramic10.1002/adem.201400065 ↗
59. Low temperature vacuum ultraviolet annealing of ZrO2 optical coatings grown by laser ablation10.1049/el:19981048 ↗
60. Insight into the properties of Fe oxide present in high concentrations on mesoporous silica10.1016/j.jcat.2008.12.016 ↗
61. On the nature of different iron sites and their catalytic role in Fe-ZSM-5 DeNOx catalysts: new insights by a combined EPR and UV/VIS spectroscopic approach10.1016/j.jcat.2004.08.003 ↗
62. Structure and reactivity of framework and extraframework iron in Fe-silicalite as investigated by spectroscopic and physicochemical methods10.1006/jcat.1996.0048 ↗
63. Investigation of surface structures of supported vanadium oxide catalysts by UV−Vis−NIR diffuse reflectance spectroscopy10.1021/jp992867t ↗
64. A facile route to synthesize nano-hematite colloid10.1016/j.matlet.2011.03.006 ↗
65. Fabrication of shape-controlled Fe2O3 nanostructures by sonoelectrochemical anodization for visible light photocatalytic application10.1016/j.matlet.2009.10.071 ↗
66. A green chemistry approach for the synthesis of flower-like Ag-doped MnO2 nanostructures probed by surface-enhanced Raman spectroscopy10.1021/jp809561p ↗
67. Thin films of sodium birnessite-type MnO2: optical properties, electronic band structure, and solar photoelectrochemistry10.1021/jp200015p ↗
68. On the role of Mn (IV)vacancies in the photoreductive dissolution of hexagonal birnessite10.1016/j.gca.2009.04.031 ↗
69. Fabrication of composite photocatalyst gC 3 N 4–ZnO and enhancement of photocatalytic activity under visible light10.1039/c2dt12474b ↗
70. Shaloma · Catal. Today · 2014 · 225 · 18510.1016/j.cattod.2013.12.013 ↗
71. Enhancement of photocurrent and photocatalytic activity of ZnO hybridized with graphite-like C3N410.1039/c0ee00825g ↗
72. Synthesis and characterization of whisker-shaped MnO2 nanostructure at room temperature10.1007/s13204-012-0135-3 ↗
73. Spectroscopic and photoluminescence studies of a wide band gap insulating material: powdered and colloidal ZrO2 Sols10.1021/la980083l ↗
74. Energy states of Ge-doped SiO2 glass estimated through absorption and photoluminescence10.1063/1.363885 ↗
75. White light emission from radical carbonyl-terminations in Al2O3–SiO2 porous glasses with high luminescence quantum efficiencies10.1063/1.1569038 ↗
76. Structure and electrical levels of point defects in monoclinic zirconia10.1103/PhysRevB.64.224108 ↗
77. Oxygen vacancies in transition metal and rare earth oxides: current state of understanding and remaining challenges10.1016/j.surfrep.2007.03.002 ↗
78. Sintering response of in-situ Zirconia/Mullite ceramic composite
79. Investigation of mechanical strength of the functionally graded zirconia-mullite/alumina ceramics tailored for high temperature applications10.1088/2053-1591/ab177e ↗