Study on preparation and thermophysical characteristics of molten salt nanocomposite by microwave method
Source abstract
Abstract
Abstract Molten salts are widely applied as heat transfer and thermal storage medium for solar thermal power. In order to research the effect of preparation conditions and the types of nanoparticles on the thermophysical properties of molten salt nanocomposite, different molten salt nanocomposites were developed by mixing the nitrates (Ca (NO3)2·4H2O–KNO3–NaNO3–NaNO2) with 1.0 wt% of SiO2, MgO, TiO2 and CuO nanoparticles using a microwave method, which was a new preparation process of molten salt nanocomposite based on high temperature mixing without water. The effect of different microwave heating temperature (250, 350 and 450 °C) and heating time (30, 60, 90 and 120 min) were experimentally studied. The melting point, latent heat and specific heat of the samples were analyzed by differential scanning calorimeter (DSC). The morphology was observed by scanning electron microscope (SEM). The results showed that the nanoparticles induced a decrease of the melting point of 0.1–2.4% while the latent heat decreased by 3.3–7.9%. Compared with other molten salt nanocomposites, the molten salt with the addition of SiO2 nanoparticles had the biggest increase in specific heat, which increased by 7.7% in solid state and 21.0% in liquid state after heating for 90 min at 250 °C. The total heat storage density could reach to 783.0 J/g between 30 and 500 °C, which was 13.3% higher than the base salt. In addition, according to the morphology of the samples, network nanostructures were observed in the molten salt nanocomposite doped with SiO2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Two-tank molten salt storage for parabolic trough solar power plants10.1016/S0360-5442(03)00193-2 ↗
2. Novel low melting point binary nitrates for thermal energy storage applications10.1016/j.solmat.2017.02.021 ↗
3. A novel process for preparing molten salt/expanded graphite composite phase change blocks with good uniformity and small volume expansion10.1016/j.solmat.2017.05.046 ↗
4. Advances in parabolic trough solar power technology10.1115/1.1467922 ↗
5. Molten salt-based nanofluids as efficient heat transfer and storage materials at high temperatures. An overview of the literature10.1016/j.rser.2017.10.080 ↗
6. Thermal energy storage enhancement of a binary molten salt via in-situ produced nanoparticles10.1016/j.ijheatmasstransfer.2016.09.004 ↗
7. Enhanced specific heat capacity of molten salt-based carbon nanotubes nanomaterials10.1115/1.4030226 ↗
8. Effect of Al2O3 nanoparticle dispersion on the specific heat capacity of a eutectic binary nitrate salt for solar power applications10.1016/j.enconman.2017.03.062 ↗
9. Heat capacity of nanofluids for solar energy storage produced by dispersing oxide nanoparticles in nitrate salt mixture directly at high temperature10.1016/j.solmat.2017.04.011 ↗
10. Effect of SiO2 nanoparticles on specific heat capacity of low-melting-point eutectic quaternary nitrate salt10.1016/j.solmat.2018.01.014 ↗
11. Effect of nanoparticles on heat capacity of nanofluids based on molten salts as PCM for thermal energy storage10.1186/1556-276X-8-448 ↗
12. Effect of formation of “long range” secondary dendritic nanostructures in molten salt nanofluids on the values of specific heat capacity10.1016/j.ijheatmasstransfer.2015.05.072 ↗
13. Experimental study of thermophysical properties and thermal stability of quaternary nitrate molten salts for thermal energy storage10.1016/j.solmat.2018.10.013 ↗
14. Increment of specific heat capacity of solar salt with SiO2 nanoparticles10.1186/1556-276X-9-582 ↗
15. Preparation and characterization of molten salt based nanothermic fluids with enhanced thermal properties for solar thermal applications10.1016/j.applthermaleng.2016.04.102 ↗
16. Effect of solvent on specific heat capacity enhancement of binary molten salt-based carbon nanotube nanomaterials for thermal energy storage10.1016/j.ijthermalsci.2015.07.020 ↗
17. Song · 2018
18. The dependency of the melting point on the surface energy of a solid body10.1515/zpch-1909-6532 ↗
19. Thermal-physical properties of nanoparticle-seeded nitrate molten salts10.1016/j.renene.2017.12.026 ↗
20. An investigation into the thermophysical and rheological properties of nanofluids for solar thermal applications10.1016/j.rser.2015.10.065 ↗
21. Specific heat mechanism of molten salt nanofluids10.1063/1.4868254 ↗
22. Enhanced specific heat capacity of high-temperature molten salt-based nanofluids10.1016/j.ijheatmasstransfer.2012.10.062 ↗
23. Surface and size effects on the specific heat capacity of nanoparticles10.1007/s10765-006-0022-9 ↗
24. Numerical investigation of the effect of interfacial thermal resistance upon the thermal conductivity of copper/diamond composites10.1016/j.matdes.2015.07.059 ↗
25. Application of nano-materials and nano-echnology in coating industry
26. Xiao · 2010
27. Effects of microwave heat treatment temperature on crystallization and properties of tailing-based glass-ceramics