Impact of phosphorus diffusion on n-type poly-Si based passivated contact silicon solar cells
Source abstract
Abstract
Abstract This paper describes the impact of phosphorus dopant concentrations in n-type passivated contact structures. Free carrier absorption (FCA) of the phosphorus doped poly-Si layers was studied by using different phosphorus dopant concentrations, with a range of from 9 × 1019 to 2.3 × 1020 cm−3, and different poly-Si layer thicknesses, with a range of from 30 to 200 nm. In the worst case, the effect of FCA reduce the short circuit current density by 0.89 mA/cm2. The impacts of tunnel SiO2 thicknesses, poly-Si thicknesses and diffusion temperatures on the performances of the poly-Si passivated contacts were studied. Phosphorus concentrations induced silicon surface field passivation play an important role in passivated contact structure. On the planar n-type mono crystalline-silicon substrates, excellent J0 value of 6.5 fA/cm2 was achieved by optimizing phosphorus doping in poly-Si films and silicon substrate. Different poly-Si thickness and diffusion temperature were studied simultaneously to optimize the phosphorous dopants in the poly-Si passivated contacts for the specified poly-Si thickness. N-type silicon solar cell have been fabricated by using the optimized poly-Si passivated contacts, as addressed above. Average efficiency of 22.52%, and best cell efficiency of 23.04% were demonstrated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. A 720 mV open circuit voltage SiOx:c-Si:SiOx double heterostructure solar cell10.1063/1.96331 ↗
2. The approaches for high efficiency HIT™ solar cell with very thin (100 μm) silicon wafer over 23%
3. High-efficiency HIT solar cells with a very thin structure enabling a high Voc
4. Highly reliable high-voltage transistors by use of the SIPOS process
5. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
6. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
7. Low temperature Si/SiOx/pc-Si passivated contacts to n-type Si solar cells
8. Efficient carrier-selective p- and n-contacts for Si solar cells10.1016/j.solmat.2014.05.039 ↗
9. IBC c-Si solar cells based on ion-implanted poly-Si passivating contacts10.1016/j.solmat.2016.05.041 ↗
10. Ultrathin (≪4 nm) SiO2 and Si–O–N gate dielectric layers for silicon microelectronics: understanding the processing, structure, and physical and electrical limits10.1063/1.1385803 ↗
11. The SIS tunnel emitter: a theory for emitters with thin interface layers [J]10.1109/T-ED.1979.19684 ↗
12. Understanding the limits of ultrathin SiO2 and SiON gate dielectrics for sub-50 nm CMOS10.1016/S0167-9317(99)00330-5 ↗
13. Polysilicon emitters for silicon concentrator solar cells
14. A simple model describing the symmetric characteristics of polycrystalline Si/Monocrystalline Si, and polycrystalline Si/Monocrystalline Si junctions10.1109/JPHOTOV.2014.2310740 ↗
15. Pinhole density and contact resistivity of carrier selective junctions with polycrystalline silicon on oxide [J]10.1063/1.4986924 ↗
16. High-efficiency silicon solar cells: Si/SiO2, interface parameters and their impact on device performance10.1002/pip.4670020402 ↗
17. Surface passivation of crystalline silicon solar cells: a review10.1002/1099-159X(200009/10)8:5<473::AID-PIP337>3.0.CO;2-D ↗
18. Phosphorus-diffused polysilicon contacts for solar cells10.1016/j.solmat.2015.06.001 ↗
19. Contactless determination of current–voltage characteristics and minority carrier lifetimes in semiconductors from quasi-steady-state photoconductance data10.1063/1.117723 ↗
20. Measurement of the emitter saturation current by a contactless photoconductivity decay method[C]//18th IEEE Specialists Conference
21. A quasi-steady state open-circuit voltage method for solar cell characterization
22. Parameterization of free carrier absorption in highly doped silicon for solar cells10.1109/TED.2013.2262526 ↗
23. Near-infrared free carrier absorption in heavily doped silicon [J]10.1063/1.4893176 ↗
24. Free carrier absorption in silicon10.1109/JSSC.1978.1051012 ↗
25. The optical (free-carrier) absorption of a hole-electron plasma in silicon10.1016/0038-1101(80)90111-2 ↗
26. Effect of silicon oxide thickness on polysilicon based passivated contacts for high-efficiency crystalline silicon solar cells10.1016/j.solmat.2018.05.011 ↗
27. IBC c-Si solar cells based on ion-implanted poly-Si passivating contacts [J]10.1016/j.solmat.2016.05.041 ↗
28. Phosphorus-diffused polysilicon contacts for solar cells10.1016/j.solmat.2015.06.001 ↗
29. Investigation of selective junctions using a newly developed tunnel current model for solar cell applications10.1016/j.solmat.2015.05.014 ↗
30. n-Type polysilicon passivating contact for industrial bifacial n-type solar cells [J]10.1016/j.solmat.2016.06.034 ↗
31. High efficiency n-type silicon solar cells with passivating contacts based on PECVD silicon films doped by phosphorus diffusion10.1016/j.solmat.2019.01.005 ↗