journal article·2018-10Open access

Design of high-temperature solar-selective coatings based on aluminium titanium oxynitrides AlyTi1-y(OxN1-x). Part 2: Experimental validation and durability tests at high temperature

R. Escobar-Galindo, E. Guillén, I. Heras, G. Rincón-Llorente, M. Alcón-Camas, F. Lungwitz, F. Munnik, E. Schumann, I. Azkona, M. Krause

Abstract

The durability of two solar-selective aluminium titanium oxynitride multilayer coatings was studied under conditions simulating realistic operation of central receiver power plants. The coatings were deposited by cathodic vacuum arc applying an optimized design concept for complete solar-selective coating (SSC) stacks. Compositional, structural and optical characterization of initial and final stacks was performed by scanning electron microscopy, elastic recoil detection, UV–Vis–NIR-IR spectrophotometry and X-Ray diffraction. The design concept of the solar selective coatings was validated by an excellent agreement between simulated and initial experimental stacking order, composition and optical properties. Both SSC stacks were stable in single stage tests of 12 h at 650 °C. At 800 °C, they underwent a structural transformation by full oxidation and they lost their solar selectivity. During cyclic durability tests, multilayer 1, comprised of TiN, Al.64Ti.36N and an Al1.37Ti.54O top layer, fulfilled the performance criterion (PC) ≤ 5% for 300 symmetric, 3 h long cycles at 600 °C in air. Multilayer 2, which was constituted of four AlyTi1-y(OxN1-x) layers, met the performance criterion for 250 cycles (750 h), but was more sensitive to these harsh conditions. With regard to the degradation mechanisms, the coarser microstructure of multilayer 1 is more resistant against oxidation than multilayer 2 with its graded oxygen content. These results confirm that the designed SSCs based on AlyTi1-y(OxN1-x) materials withstand breakdown at 600 °C in air. Therefore, they can be an exciting candidate material for concentrated solar power applications at high temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Semiconductor materials and devices · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Technology Roadmap: Solar Thermal Electricity-2014 ed. 〈〈http://www.iea.org/publications/freepublications/publication/technology-roadmap-solar-thermal-electricity-2014-edition.html〉〉. (Last accessed on 02.04.16).
2. B. Carlsson, U. Frei, M. Köhl, K. Moller, Accelerated Life Testing of Solar Energy Materials, Case study of some selective solar absorber coating materials for DHW Systems, IEA technical report of Task X in the Soar Heating and Cooling Programme. SP-Report 94:13. Available from Swedish National Testing and Research Institute, P.O. Box 857, S-50115 Boras, Sweden, 1994.
3. A review on thermal stability and high temperature induced ageing mechanisms of solar absorber coatings10.1016/j.rser.2016.09.083 ↗
4. The investigation of thermal stability of Al/NbMoN/NbMoON/SiO2 solar selective absorbing coating10.1016/j.solmat.2017.06.056 ↗
5. O. Raccurt, F. Matino, A. Disdier, J. Braillon, A. Stollo, D. Bourdon, A. Maccari, In air durability study of solar selective coating for parabolic trough technology. AIP Conference Proceedings 1850 130010, 2017.10.1063/1.4984504 ↗
6. Advanced procedure for the assessment of the lifetime of solar absorber coatings10.1016/j.solmat.2004.01.041 ↗
7. Durability of solar energy materials10.1016/S0960-1481(01)00046-5 ↗
8. Standardization ECf. Draft BSEN 12975-3-1 thermal solar systems and components –Solar collectors – Part 3-1. Qualification of solar absorber surface durability. p. 1–34.
9. Structural and optical properties of titanium aluminum nitride films (Ti1-xAlxN)10.1116/1.1359532 ↗
10. TiAlN/TiAlON/Si3N4 tandem absorber for high temperature solar selective applications10.1063/1.2387897 ↗
11. Optical properties and thermal stability of TiAlN/AlON tandem absorber prepared by reactive DC/RF magnetron sputtering10.1016/j.solmat.2008.06.004 ↗
12. Growth, characterization and performance evaluation of Ti/AlTiN/AlTiON/AlTiO high temperature spectrally selective coatings for solar thermal power applications10.1016/j.solmat.2014.07.037 ↗
13. Optical characterization of TiAlN/TiAlON/SiO2 absorber for solar selective applications10.1016/j.surfcoat.2011.09.003 ↗
14. Microstructure and thermal stability of Al/Ti0.5Al0.5N/Ti0.25Al0.75N/AlN solar selective coating10.1016/j.solmat.2012.12.010 ↗
15. The development of the PVD coating TiAlN as a commercial coating for cutting tools10.1016/0257-8972(91)90142-J ↗
16. Thermal oxidation of Ti1−xAlxN coatings in air10.1016/S0955-2219(97)00050-2 ↗
17. Oxidation post-treatment of hard AlTiN coating for machining of hardened steels10.1016/j.surfcoat.2009.07.010 ↗
18. Thermal cycling of AlTiN- and AlTiON- coated hot work tool steels at elevated temperatures10.1016/j.msea.2011.02.076 ↗
19. Thermal stability and oxidation resistance of Ti-Al-N coatings10.1016/j.surfcoat.2011.12.028 ↗
20. Probing temperature-induced ordering in supersaturated Ti1−xAlxN coatings by electronic structure10.1016/j.surfcoat.2013.10.054 ↗
21. Characterization of tribological behavior and wear mechanisms of novel oxynitride PVD coatings designed for applications at high temperatures10.1016/j.triboint.2014.08.016 ↗
22. Structural evolution of Ti-Al-Si-N nanocomposite coatings10.1016/j.vacuum.2009.03.009 ↗
23. Effect of Si addition on microstructure and mechanical properties of Ti–Al–N coating10.1016/j.ijrmhm.2010.05.001 ↗
24. Characterization of TiAlSiN/TiAlSiON/SiO2 optical stack designed by modelling calculations for solar selective applications10.1016/j.solmat.2012.06.011 ↗
25. The spectral selective absorbing characteristics and thermal stability of SS/TiAlN/TiAlSiN/Si3N4 tandem absorber prepared by magnetron sputtering10.1016/j.solener.2014.11.005 ↗
26. Functional multi-layer nitride coatings for high temperature solar selective applications10.1016/j.solmat.2013.10.024 ↗
27. Design and fabrication of spectrally selective TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO tandem absorber for high-temperature solar thermal power applications10.1016/j.solmat.2015.04.018 ↗
28. Measurement of high temperature emissivity and photothermal conversion efficiency of TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO spectrally selective coating10.1016/j.solmat.2017.06.057 ↗
29. Design of high-temperature solar-selective coatings based on aluminium titanium oxynitrides AlyTi1-y(OxN1-x). Part 1: advanced microstructural characterisation and optical simulation10.1016/j.solmat.2017.10.015 ↗
30. Energetic deposition using filtered cathodic arc plasmas10.1016/S0042-207X(02)00260-9 ↗
31. Structural effects of energy input during growth of Ti1−xAlxN (0.55≤x≤0.66) coatings by cathodic arc evaporation10.1016/j.surfcoat.2013.12.018 ↗
32. Thermal stability of arc evaporated high aluminum-content Ti1−xAlxN thin films10.1116/1.1503784 ↗
33. Simulated annealing analysis of Rutherford backscattering data10.1063/1.119524 ↗
34. W. Theiss, CODE Manual. Optical Spectrum Simulation. 〈http://www.wtheiss.com/〉.