Screen printed phosphorus diffusion for low-cost and simplified industrial mono-crystalline silicon solar cells
Source abstract
Abstract
Abstract Screen-printing is considered to be the most efficient technique for large-scale Si solar cell production. Doping technique currently in use, such as POCl 3 diffusion furnace, H 3 PO 4 spray doping and spin-on-doping (SOD) tend to be time-consuming and wasteful of source materials. Screen printing technology can be used for the application of doping substance for diffusion. Diffusion paste doping by the support of screen printing has enough potential to overcome the disadvantages of other doping techniques. This paper demonstrates a simple method for creation of P–N junction, with efficiency above 16.1%, using a screen printable phosphorus diffusion paste. To optimize the doping process using screen printing, we varied several experimental conditions, including firing temperatures and time. A fill factor above 77% has been reached, with an efficiency of 16.1% in a 10.0 cm×10.0 cm. The high fill factor with paste doping is mainly due to a contact resistance (3.53 Ω) lower than that for POCl 3 (5.64 Ω). These results could be applied to the manufacturing of low cost, simplified and high efficiency Si solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. The porous silicon emitter concept applied to multicrystalline silicon solar cells10.1016/S0040-6090(96)09368-6 ↗
2. Polycrystalline silicon solar cells with V-grooved surface10.1016/0927-0248(94)90043-4 ↗
3. High efficiency multi-crystalline silicon solar cells10.1016/0927-0248(94)90044-2 ↗
4. High efficiency, mechanically V-textured, screen printed multicrystalline silicon solar cells
5. A. Upadhyaya, M. Sheoran, A. Ristow, A. Rohatgi, S. Narayanan, S. Roncin, Greater than 16% efficient screen printed solar cells on 115–170 μm thick cast multicrystalline silicon, Conference Record of the 2006 IEEE 4th World Conference on Photovoltaic Energy Conversion, 2007, pp. 1052–105510.1109/WCPEC.2006.279321 ↗
6. Solar cell characteristics of high-efficiency polycrystalline silicon solar cells using SOG-cast wafers10.1143/JJAP.26.1667 ↗
7. TLM extension for the study of screen printing contacts on multicrystalline silicon10.1051/epjap:1998160 ↗
8. D. Pysch, A. Mette, A. Filipovic, S.W. Glunz, Comprehensive analysis of advanced solar cell contacts consisting of printed fine-line seed layers thickened by silver plating, Progress in Photovoltaics: Research and Applications 17 (2009) 101–11410.1002/pip.855 ↗
9. Impact of tungsten capping layer on yttrium silicide for low-resistance n+-source/drain contacts10.1143/JJAP.48.04C046 ↗
10. Low resistivity layers and Schottky contacts in amorphous silicon by Co+ implantation10.1049/el:19981658 ↗
11. The relationship between hydrogen content, weak bond density and Staebler–Wronski defects in amorphous silicon10.1016/0022-3093(89)90670-4 ↗
12. Analysis of the current–voltage characteristic of solar cells10.1016/0038-1101(86)90181-4 ↗
13. A practical method of analysis of the current–voltage characteristics of solar cells10.1016/0379-6787(81)90067-3 ↗
14. C. Schmiga, H. Nagel, J. Schmidt, 19% efficient n-type czochralski silicon solar cells with screen-printed aluminium-alloyed rear emitter, Progress in Photovoltaics: Research and Applications 14 (2006) 533–53910.1002/pip.725 ↗