journal article·2014-09

Outdoor testing and degradation of dye-sensitized solar cells in Abu Dhabi

A. Asghar, M. Emziane, H.K. Pak, S.Y. Oh

Publisher page

Abstract

Abstract This paper reports on the long-term testing of Dye-Sensitized Solar Cells (DSSCs) compared with a polycrystalline Si solar cell under the outdoor conditions of Abu Dhabi, UAE. A comparison of the temperature and irradiance dependence of both types of solar cells shows that DSSCs has relatively better performance than the polycrystalline Si solar cell under low irradiance levels and high temperatures. The monthly energy yields reveal that DSSCs produce about 20% higher energy during the spring months and about 30% higher energy during the summer months. The long-term stability of different DSSCs has been monitored under real outdoor conditions for over six months and degradation mechanisms have been proposed. Ionic liquid based DSSCs were significantly more stable when compared to devices based on other electrolyte solvents. However, the efficiency of all the experimental DSSCs degraded over time due to several factors outlined in the paper. This paper further outlines the advantages of DSSCs for their potential use in buildings in warm regions such as the Middle East and North Africa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Pigment Synthesis and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. G24i (〈www.g24i.com〉), 2014 (accessed on 10.05.2014).
2. Solar energy technology in the Middle East and North Africa (MENA) for sustainable energy, water and environment
3. Hopwood D. Abu Dhabi׳s Masdar plan takes shape. Renewable Energy Focus 11: 18-23.10.1016/S1755-0084(10)70025-9 ↗
4. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
5. Thermal thiocyanate ligand substitution kinetics of the solar cell dye N719 by acetonitrile, 3-methoxypropionitrile, and 4-tert-butylpyridine10.1016/j.solmat.2007.07.011 ↗
6. Thiocyanate ligand substitution kinetics of the solar cell dye Z-907 by 3-methoxypropionitrile and 4-tert-butylpyridine at elevated temperatures10.1016/j.solmat.2009.07.008 ↗
7. Degradation analysis of dye-sensitized solar cell module after long-term stability test under outdoor working condition10.1016/j.solmat.2008.10.022 ↗
8. Dye-sensitized solar cells10.1021/cr900356p ↗
9. Material development for dye solar modules: results from an integrated approach10.1002/pip.832 ↗
10. Outdoor performance of large scale DSC modules10.1016/j.jphotochem.2003.11.022 ↗
11. Long-term stability testing of dye-sensitized solar cells10.1016/j.jphotochem.2003.12.017 ↗
12. Long-term stability of dye-sensitised solar cells10.1002/pip.397 ↗
13. Review of stability for advanced dye solar cells10.1039/b922801b ↗
14. Improvement in long-term stability of dye-sensitized solar cell for outdoor use10.1016/j.solmat.2010.04.019 ↗
15. BIPV applications in the GCC region: a comparative study on the key parameters
16. D.L. King, J.A. Kratochvil, W.E. Boyson. Temperature coefficients for PV modules and arrays: Measurement methods, difficulties, and results in: Proceedings of the 26th IEEE Photovoltaic Specialists Conference, Anaheim, CA 1997: 1183-1186.10.1109/PVSC.1997.654300 ↗
17. E. Peng, H. Berberoglu, Fabrication of a dye sensitized dolar cell and its performance dependence on temperature and irradiance, in: Proceedings of the ASME Conference; 2011: T20053-T20053-9.10.1115/AJTEC2011-44349 ↗
18. Performance of dye-sensitized solar cells based on Ionic liquids: effect of temperature and iodine concentration10.1016/j.tsf.2007.12.003 ↗