Micro characterization of laser structured solar cells with plated Ni–Ag contacts
Source abstract
Abstract
Abstract An evolutionary approach to increase the cell efficiency of the industrially widely used Al-BSF Si solar cell design is the implementation of a lightly doped emitter and plated Ni–Ag front side contacts. This work shows that this approach can give a significant advantage to fully screen printed solar cells with cell efficiencies up to 19%. However, the adhesion of the plated contacts strongly depends on the tempering induced silicidation of the Ni layer. The application of macroscopic and microscopic characterization techniques indicates that the tempering induces local non-ohmic shunts due to a silicide spiking in the space charge region. The application of an additional selective emitter doping in this experiment could decrease the shunting probability but could not prevent it completely due to inhomogeneous doping depths on the textured surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. D. Kyeong, et al. Approaching 20%-efficient selective-emitter solar cells with copper front contacts on industrial 156mm Cz Si wafers, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference and Exhibition, Frankfurt, Germany, 2012.
2. Record efficiency on large area p-type czochralski silicon substrates10.7567/JJAP.51.10NA08 ↗
3. L. Tous, et al., Nickel silicide formation using excimer laser annealing, in: Proceedings of the 2nd International Conference on Crystalline Silicon Photovoltaics (Siliconpv 2012), 2012 27, pp. 503–509.10.1016/j.egypro.2012.07.101 ↗
4. C. Ni Dheasuna, et al. Novel buried contact technology for advanced silicon solar cells, in: Proceedings of the 1st World Conference on Photovoltaic Energy Conversion, Hawaii, USA, 1994.10.1109/WCPEC.1994.520234 ↗
5. Mondon · Solar Energy Materials and Solar Cells · 2013
6. Tjahjono · 2010
7. Laser chemical processing (LCP)—a versatile tool for microstructuring applications10.1007/s00339-008-4723-8 ↗
8. S. Hopman, et al. Influence of concentration of phosphorus dopant liquid and pulse distance on parameters of LCP selective emitters for silicon solar cells, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition, Valencia, Spain, 2010.
9. High-efficiency silicon solar cells with boron local back surface fields formed by laser chemical processing10.1109/LED.2011.2159699 ↗
10. S. Kluska, et al. Boron LCP local back surface fields for high efficiency silicon solar cells. in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference (PVSC), 2011.10.1109/PVSC.2011.6186236 ↗
11. A. Fell, S. Hopman, F. Granek. Investigation on the influence of the intensity profile on the doping quality in laser chemical processing (LCP), in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition, Valencia, Spain, 2010.
12. Influence of pulse duration on the doping quality in laser chemical processing (LCP)—a simulative approach10.1007/s00339-012-7144-7 ↗
13. S. Kluska, et al., in preparation.
14. Silicide formation in Ni–Si schottky barrier diodes10.1088/0022-3727/9/6/009 ↗
15. On the Ni–Si phase transformation with/without native oxide10.1016/S0167-9317(99)00521-3 ↗
16. Advantages of photoplating for laser doped solar cells10.1002/pip.1072 ↗
17. McIntosh · 2001 · 180
18. R.A. Sinton, A. Cuevas A quasi-steady-state open-circuit voltage method for solar cell characterization, in: Proceedings of the 16th European Photovoltaic Solar Energy Conference, Glasgow, UK: James & James, London, UK, 2000.
19. Breitenstein · 2003
20. M. Rauer, et al. Nickel-plated front contacts for front and rear emitter silicon solar cells, in: Proceedings of the SiliconPV 2013, Hamelin, Germany, Energy Procedia, 2013, submitted for publication.10.1016/j.egypro.2013.07.303 ↗
21. A novel method of semiconductor device measurements10.1109/PROC.1964.3460 ↗
22. Charge collection scanning electron microscopy10.1063/1.331667 ↗
23. Field-emission SEM imaging of compositional and doping layer semiconductor superlattices10.1016/0304-3991(94)00183-N ↗
24. Profiling n-type dopants in silicon10.2320/matertrans.MC200910 ↗
25. Secondary electron microscopy dopant contrast image (SEMDCI) for laser doping10.1109/JPHOTOV.2013.2241820 ↗
26. A reciprocity theorem for charge collection10.1063/1.95654 ↗
27. Evaluation of p-n junction position and channel length in Si devices with resolution of a few nanometers by low-energy EBIC10.4028/www.scientific.net/SSP.63-64.77 ↗
28. Selective laser ablation of SiNx layers on textured surfaces for low temperature front side metallizations
29. Laser-silicon interaction for selective emitter formation in photovoltaics. I. Numerical model and validation
30. A. Sugianto, et al. 18.5% laser-doped solar cell on CZ p-type silicon, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, Honolulu, Hawaii, USA, 2010.10.1109/PVSC.2010.5616914 ↗
31. Why is it that differently doped regions in semiconductors are visible in low voltage SEM?10.1109/TED.2003.821884 ↗
32. Mechanism for secondary electron dopant contrast in the SEM10.1093/oxfordjournals.jmicro.a023811 ↗