journal article·2011-05

Sulfurization of Cu–In electrodeposited precursors for CuInS2-based solar cells

C. Broussillou, M. Andrieux, M. Herbst-Ghysel, M. Jeandin, J.S. Jaime-Ferrer, S. Bodnar, E. Morin

Publisher page

Abstract

Abstract Cu–In electrodeposited layers were annealed using rapid thermal processing (RTP) in a reactive atmosphere containing sulfur vapors. The CuInS 2 formation mechanism during sulfurization of electrodeposited precursors proceeds mainly through direct sulfurization of the metallic Cu–In alloy, forming spinel CuIn 5 S 8 and chalcopyrite CuInS 2 ternary phases. During the heating step, the Cu–In metallic alloy gets richer in copper as the temperature increases and transforms from CuIn 2 to Cu 11 In 9 , then Cu 16 In 9 and finally to Cu 7 In 3 . The use of rapidly cooled samples stopped after different durations of the process along with ex-situ XRD analysis enabled us to differentiate the Cu 16 In 9 and Cu 7 In 3 phases. Finally, the efficiency of the solar cells made with the two-step electrodeposition and RTP low-cost process reaches 11% (active area 0.421 cm 2 ), which is close to the results obtained for cells made with PVD precursors.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. Pilot production of large-area CuInS2-based solar modules10.1016/j.tsf.2006.12.140 ↗
2. Solar cells based on CuInS2–an overview10.1016/j.tsf.2004.11.042 ↗
3. Synthesis of CuInS2 films by sulphurization of Cu/In stacked elemental layers10.1016/S0927-0248(99)00064-1 ↗
4. Real-time studies of phase transformations in Cu–In–Se–S thin films 2. Sulfurization of Cu–In precursors10.1016/j.jcrysgro.2005.10.106 ↗
5. Progress in the development of CuInS2 based mini-modules10.1016/j.tsf.2006.12.153 ↗
6. Growth paths for the sulfurization of Cu-rich Cu/In thin films10.1016/j.tsf.2008.10.091 ↗
7. Preparation and properties of CuInS2 thin film prepared from electroplated precursor10.1016/j.solener.2004.08.031 ↗
8. Electrodeposited CuInS2-based thin-film solar cells10.1016/S0927-0248(02)00097-1 ↗
9. Pressure-dependent real-time investigations on the rapid thermal sulfurization of Cu–In thin films10.1016/j.jcrysgro.2008.05.005 ↗