journal article·2023-01

Experimental study on supercooling and heat transfer performance during the solidification of sodium acetate trihydrate composites

Wenbin Cui, Teng Guo, Yuan Xinhui, Hongbin Ma, Dalong Liang, Jingming Dong

Publisher page

Abstract

Heat storage is a promising method for enhancing the utilization efficiency of new energy by providing a stable heat supply drawn from a discontinuous new energy source. The disadvantages of phase change materials are well known—such as supercooling during solidification and low conductivity. This article introduces the development of four novel composite phase change materials (CPCMs) based on sodium acetate trihydrate (SAT). The additives include carboxyl methyl cellulose (CMC) working as the thickener and gamma alumina (γ-Al 2O 3 ), sodium chloride (NaCl), multi-walled carbon nanotube(CNT), sodium chloride combined with multi-walled carbon nanotube(NaCl/CNT) working as the nucleating agents. The experimental results showed these CPCMs performed well during solidification with the supercooling lower than 2.5 °C, and the nucleating agents can improve the thermal conductivity to 1.26 W/(m⋅K) and achieved an acceptable thermal stability by a supercooling deterioration to 3.7 °C after 100 thermal cycles. The raised thermal conductivity, however, created a temperature descending stage during the solidification process, and induced the deterioration of the supercooling reduction. NaCl/CNT had an outstanding effect on reducing the supercooling to 0.2 °C. The CPCM with the dual nucleating agent possessed a melting temperature of 55.9 °C and a latent heat of 243.5J/g.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Experimental study on thermal management and performance improvement of solar PV panel cooling using form stable phase change material
2. Performance enhancement of a building-integrated concentrating photovoltaic system using phase change material10.1016/j.solmat.2015.12.035 ↗
3. Performance enhancement of a photovoltaic module by passive cooling using phase change material in a finned container heat sink10.1016/j.solener.2019.11.053 ↗
4. Thermal management of portable photovoltaic systems using novel phase change materials with efficiently enhanced thermal conductivity10.1016/j.solmat.2022.111936 ↗
5. Design and optimization of an air heating solar collector with integrated phase change material energy storage for use in humidification-dehumidification desalination10.1016/j.solener.2012.07.017 ↗
6. Thermal performance of building element containing phase change material (PCM) integrated with ventilation system-an experimental study10.1016/j.applthermaleng.2014.05.093 ↗
7. Use of a latent heat thermal energy storage system for cooling a light-weight building: experimentation and co-simulation10.1016/j.enbuild.2016.05.082 ↗
8. Energetic and exergetic performance assessment of the inclusion of phase change materials (PCM) in a solar distillation system10.1016/j.enconman.2018.10.078 ↗
9. An experimental investigation of a v-corrugated absorber single-basin solar still using PCM10.1016/j.desal.2016.07.042 ↗
10. Study on annual performance of the solar still using shape-stabilized phase change materials with economic analysis10.1016/j.solmat.2021.111263 ↗
11. A review on supercooling of phase change materials in thermal energy storage systems10.1016/j.rser.2016.11.272 ↗
12. Thermal performance of sodium acetate trihydrate based composite phase change material for thermal energy storage10.1016/j.applthermaleng.2018.07.094 ↗
13. Preparation and thermal energy storage studies of CH3COONa·3H2O-KCl composites salt system with enhanced phase change performance10.1016/j.applthermaleng.2016.04.029 ↗
14. Experimental studies on the supercooling and melting/freezing characteristics of nano-copper/sodium acetate trihydrate composite phase change materials10.1016/j.renene.2016.08.001 ↗
15. Experimental investigation on copper foam/hydrated salt composite phase change material for thermal energy storage10.1016/j.ijheatmasstransfer.2017.07.056 ↗
16. Thermal properties and thermal conductivity enhancement of composite phase change material using sodium acetate trihydrate-urea/expanded graphite for radiant floor heating system10.1016/j.applthermaleng.2018.04.102 ↗
17. Phase change performance of sodium acetate trihydrate with AlN nanoparticles and CMC10.1016/j.solmat.2011.05.025 ↗
18. Developing NaAc·3H2O-based composite phase change material using glycine as temperature regulator and expanded graphite as supporting material for use in floor radiant heating10.1016/j.molliq.2020.113932 ↗
19. Thermal conductivity enhancement of a sodium acetate trihydrate-potassium chloride- urea/expanded graphite composite phase-change material for latent heat thermal energy storage10.1016/j.enbuild.2020.110615 ↗
20. Preparation research of novel composite phase change materials based on sodium acetate trihydrate10.1016/j.applthermaleng.2017.02.102 ↗