journal article·2022-12

TiN doped Ni–Co bimetal organic framework based-composite phase change material with enhanced photothermal conversion performance

Ziheng Wu, Zhaochun Ye, Shasha Shi, Yaobing Fang, Li Li, Wenhui Yuan

Publisher page

Abstract

Shape stability and excellent photothermal conversion performance are critical for composite PCMs in the field of solar energy utilization. This study prepares a nickel and cobalt-based bimetal organic framework (Ni–Co-BTC) which is further employed as the supporting material for 1-octadecanol (OD). The flower-like Ni–Co-BTC with an interconnected network exhibits large specific surface area, pore volume, and appropriate pore size distribution, which is conducive to the encapsulation of OD (up to 70 wt%). In addition, TiN nanoparticles are added to enhance the photothermal conversion performance of composite PCM. Therefore, the obtained OD/Ni–Co-BTC/TiN composite PCM exhibits considerable thermal energy storage capacity (145.8 J/g) and remarkable photothermal energy conversion efficiency (up to 97.75%). Furthermore, the composite PCM has outstanding thermal stability and reliability, and the phase change enthalpy is reduced by only 1.7% after 100 cycles. Accordingly, the composite PCM shows a promising application potential in solar energy harvesting, conversion and storage.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar-Powered Water Purification Methods · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Potential of solar energy in developing countries for reducing energy-related emissions10.1016/j.rser.2018.03.065 ↗
2. Renewable energy consumption, carbon emissions, and development stages: some evidence from panel cointegration analysis10.1016/j.renene.2018.08.069 ↗
3. A new low-cost high-temperature shape-stable phase change material based on coal fly ash and K2CO310.1016/j.solmat.2019.110328 ↗
4. Using phase change material as an energy-efficient technique to reduce energy demand in air handling unit integrated with absorption chiller and recovery unit–Applicable for high solar-irradiance regions10.1016/j.est.2021.103080 ↗
5. Reduced graphene oxide and zirconium carbide co-modified melamine sponge/paraffin wax composites as new form-stable phase change materials for photothermal energy conversion and storage10.1016/j.applthermaleng.2019.114412 ↗
6. Nanoconfined phase change materials for thermal energy applications10.1039/C7EE03587J ↗
7. Carbonized wood flour matrix with functional phase change material composite for magnetocaloric-assisted photothermal conversion and storage10.1016/j.energy.2020.117636 ↗
8. Effect of nano-SiC on thermal properties of expanded graphite/1-octadecanol composite materials for thermal energy storage10.1016/j.powtec.2020.03.039 ↗
9. 1-Octadecanol@hierarchical porous polymer composite as a novel shape-stability phase change material for latent heat thermal energy storage10.1016/j.apenergy.2016.11.043 ↗
10. Novel shape-stabilized phase change materials: insights into the thermal energy storage of 1-octadecanol/fumed silica composites10.1016/j.est.2022.104772 ↗
11. Enhancement of ceramic foam modified hierarchical Al2O3@expanded graphite on thermal properties of 1-octadecanol phase change materials10.1016/j.est.2019.101025 ↗
12. In-situ calcination of NiO nanowalls@carbon foam with hybrid 2D/3D framework to reinforce 1-octadecanol phase change materials10.1016/j.est.2022.104611 ↗
13. Introduction of an organic acid phase changing material into metal–organic frameworks and the study of its thermal properties10.1039/C6TA01676F ↗
14. Construction of CNT@Cr-MIL-101-NH2 hybrid composite for shape-stabilized phase change materials with enhanced thermal conductivity10.1016/j.cej.2018.05.190 ↗
15. A novel enhancement of shape/thermal stability and energy-storage capacity of phase change materials through the formation of composites with 3D porous (3,6)-connected metal–organic framework10.1016/j.cej.2020.124430 ↗
16. Highly porous carbons derived from MOFs for shape-stabilized phase change materials with high storage capacity and thermal conductivity10.1039/C6RA04059D ↗
17. A facile one-step synthesis of porous N-doped carbon from MOF for efficient thermal energy storage capacity of shape-stabilized phase change materials10.1016/j.mtener.2019.01.011 ↗
18. A nickel and cobalt bimetal organic framework with high capacity as an anode material for lithium-ion batteries10.1039/D0SE00983K ↗
19. Dandelion-like nickel/cobalt metal-organic framework based electrode materials for high performance supercapacitors10.1016/j.jcis.2018.07.044 ↗
20. Honeycomb-like Ni3(NO3)2(OH)4@Ni/Co-BTC composites as electrode materials for high performance supercapacitors10.1016/j.mseb.2021.115136 ↗
21. Preparation of Au–Ag bimetallic nanoparticles for enhanced solar photothermal conversion10.1016/j.ijheatmasstransfer.2017.07.005 ↗
22. Systematical investigation on the solar-thermal conversion performance of TiN plasmonic nanofluids for the direct absorption solar collectors10.1016/j.colsurfa.2021.126837 ↗
23. Ternary molten salt energy storage coupled with graphene oxide-TiN nanofluids for direct absorption solar collector10.1016/j.enbuild.2021.111481 ↗
24. Flower-like NiCo2O4 from Ni-Co 1,3,5-benzenetricarboxylate metal organic framework tuned by graphene oxide for high-performance lithium storage10.1016/j.electacta.2018.05.055 ↗
25. Metal-organic framework-based phase change materials for thermal energy storage10.1016/j.xcrp.2020.100218 ↗
26. Aluminum fumarate-based metal organic frameworks with tremella-like structure as ultrafast and stable anode for lithium-ion batteries10.1016/j.nanoen.2017.06.007 ↗
27. One-pot synthesis of a metal–organic framework as an anode for Li-ion batteries with improved capacity and cycling stability10.1016/j.jssc.2013.11.014 ↗
28. Stearyl alcohol/palm triple pressed acid-graphite nanocomposites as phase change materials10.1016/j.tca.2018.03.014 ↗
29. Control of diffusion and conformation behavior of methyl methacrylate monomer by phenylene fin in porous coordination polymers10.1021/acs.jpcc.5b09332 ↗
30. Intercalation and confinement of poly(ethylene oxide) in porous carbon nanoparticles with controlled morphologies10.1021/ma501607e ↗
31. Unveiling thermal transitions of polymers in subnanometre pores10.1038/ncomms1091 ↗
32. Multifunctional phase change composites based on biomass/MXene-derived hybrid scaffolds for excellent electromagnetic interference shielding and superior solar/electro-thermal energy storage10.1007/s12274-022-4626-6 ↗
33. The organic-moiety-dominated Li + intercalation/deintercalation mechanism of a cobalt-based metal–organic framework10.1039/C6TA06413B ↗
34. Morphology-dependent electrochemical performance of Ni-1,3,5-benzenetricarboxylate metal-organic frameworks as an anode material for Li-ion batteries10.1016/j.jcis.2018.06.057 ↗
35. Graphene-CoO/PEG composite phase change materials with enhanced solar-to-thermal energy conversion and storage capacity10.1016/j.compscitech.2020.108197 ↗
36. Facile preparation of Metal/Metal-organic frameworks decorated phase change composite materials for thermal energy storage10.1016/j.est.2021.102711 ↗
37. Encapsulation of lauric acid in reduced graphene-N-doped porous carbon supporting scaffold for multi-functional phase change composites10.1016/j.renene.2021.02.028 ↗