journal article·2022-06

Emitter formation with boron diffusion from PECVD deposited boron-doped silicon oxide for high-efficiency TOPCon solar cells

Hao Cheng, Wei Liu, Zunke Liu, Zhenhai Yang, Dian Ma, Haojiang Du, Jun Luo, Haiyang Xing, Mingdun Liao, Yuheng Zeng, Baojie Yan, Jichun Ye

Publisher page

Abstract

We present a systematic study of emitter formation with dopant diffusion from boron (B)-doped hydrogenated silicon oxide (a-SiO x :H) deposited on textured n-type monocrystalline silicon (n-c-Si) wafers using a 13.56 MHz plasma-enhanced chemical vapor deposition (PECVD) system. The B atoms in the a-SiO x:H are activated and diffused into the n-c-Si wafer during a high-temperature annealing to form a p/n junction for solar cell application. Afterward, the B-doped SiO x layer is removed by hydrofluoric acid selective etching to obtain a clean surface for the deposition of AlO x passivation and SiN x antireflection layers. With the optimization of the PECVD deposition and the following annealing/etching processes, the B diffused region with a sheet resistance of 60–100 Ω/sq and a junction depth of 1.2–1.5 μm is obtained. A champion implied open-circuit voltage ( iV oc) of 705 mV and a single-side saturated recombination current density ( J 0,s) of 17.6 fA/cm 2 are obtained from a double-sided B diffused sample after the passivation with an atomic-layer-deposition (ALD) AlOx. In addition, the contact resistivity ( ρ c) at the metal/emitter interface is lower than 5 mΩcm 2, where the metal contact is a Ti/Pd/Ag tri-layer structure. All of the material properties meet the requirements of high-efficiency solar cell. With the optimized emitter in the front, we made a SiO x and heavily phosphorus-doped polycrystalline silicon carbide (n-poly-SiC x ) stack on the rear surface to form tunnel oxide passivated contact (TOPCon) solar cells. The results show that the iV oc of semi-finished TOPCon solar cell before metallization is more than 725 mV. Finally, a TOPCon solar cell with an efficiency of 24.24% is obtained, which is comparable with the TOPCon solar cells with the industrial thermally diffused emitter.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
2. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
3. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
4. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
5. Industrial progress and application of TOPCon cells and modules
6. Exploring technological progress and mass production of high-efficiency n-type TOPCon solar cells
7. Industrial Screen-Printed n-PERT-RJ Solar Cells: efficiencies beyond 22% and open-circuit voltages approaching 700 mV10.1109/JPHOTOV.2019.2919117 ↗
8. High-efficiency n-type silicon PERT bifacial solar cells with selective emitters and poly-Si based passivating contacts10.1016/j.solener.2019.09.085 ↗
9. monoPoly™ cells: large-area crystalline silicon solar cells with fire-through screen printed contact to doped polysilicon surfaces10.1016/j.solmat.2018.05.059 ↗
10. 24.58 % total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
11. Jichun Ye, Dual-functional carbon-doped polysilicon films for passivating contact solar cells: regulating physical contacts while promoting photoelectrical properties10.1039/D1EE02011K ↗
12. Detailed loss analysis of 24.8% large-area screen-printed n-type solar cell with polysilicon passivating contact10.1016/j.xcrp.2021.100603 ↗
13. Homogeneous p+ emitter diffused using borontribromide for record 16.4% screen-printed large area n-type mc-Si solar cell10.1016/j.solmat.2008.09.019 ↗
14. Preparation of p+-layers using water vapour as oxidant in BBr3 diffusion for silicon solar cells10.1088/0022-3727/46/28/285102 ↗
15. Mechanisms of boron diffusion in silicon and germanium10.1063/1.4763353 ↗
16. Properties of boron-rich layer formed by boron diffusion in n-type silicon10.1016/j.tsf.2014.05.038 ↗
17. Chemical etching of boron-rich layer and its impact on high efficiency n-type silicon solar cells10.1063/1.4746424 ↗
18. Study of boron diffusion for p+ emitter of large area N-type TOPCon silicon solar cells10.1007/s00339-020-03851-5 ↗
19. PECVD Al2O3/a-Si:B as a dopant source and surface passivation10.1002/pssa.201228850 ↗
20. Passivating boron silicate glasses for co-diffused high-efficiency n-type silicon solar cell application10.1063/1.4927667 ↗
21. PECVD BSG diffusion sources for simplified high-efficiency N-PERT BJ and BJBC solar cells10.1109/JPHOTOV.2015.2493364 ↗
22. 21.0%-efficient screen-printed n-PERT back-junction silicon solar cell with plasma-deposited boron diffusion source10.1016/j.solmat.2016.05.054 ↗
23. Impact of boron doping on electrical performance and efficiency of n-TOPCon solar cell10.1016/j.solener.2021.08.075 ↗
24. Rapid vapor-phase direct doping for high-efficiency solar cells10.1109/JPHOTOV.2018.2861713 ↗
25. Ultrathin silicon oxide prepared by in-line plasma-assisted N2O oxidation (PANO) and the application for n-type polysilicon passivated contact10.1016/j.solmat.2019.110389 ↗
26. An industrially viable TOPCon structure with both ultra-thin SiOx and n+-poly-Si processed by PECVD for p-type c-Si solar cells10.1016/j.solmat.2019.109926 ↗
27. Y. Chen, D. Chen, P. Altermat, G. Xu, P. Verlinden, >25% large-area industrial silicon solar cell: Learning from history and future perspective, in: Proc. 36th Eur. Photovolt. Sol. Energy Conf. Exhib. Marseille, France, 2019, pp. 294-299, https://www.researchgate.net/publication/335927946_25.
28. Contact resistance and contact resistivity10.1149/1.2404240 ↗
29. Fundamental boron-oxygen-related carrier lifetime limit in mono- and multicrystalline silicon10.1002/pip.586 ↗
30. Structure and transformation of the metastable boron- and oxygen-related defect center in crystalline silicon10.1103/PhysRevB.69.024107 ↗
31. On the passivation mechanism of poly-silicon and thin silicon oxide on crystal silicon wafers10.1016/j.solener.2019.10.064 ↗