journal article·2022-01

Bifacial semi-transparent ultra-thin Cu(In,Ga)Se2 solar cells on ITO substrate: How ITO thickness and Na doping influence the performance

Yong Li, Guanchao Yin, Martina Schmid

Publisher page

Abstract

Abstract Ultra-thin Cu(In,Ga)Se2 (CIGSe) is a promising absorber for thin-film solar cells, as it combines the advantages of low raw material consumption and high conversion efficiency. In addition, ultra-thin absorbers on transparent back contacts bring the advantage of semitransparency, which is essential for e.g. tandem or bifacial solar cells. This work optimizes ultra-thin CIGSe on In2O3:Sn (ITO) for application in bifacial semi-transparent ultra-thin (BSTUT) CIGSe solar cells. Firstly, 100–400 nm ITO were coated onto glass substrates, and it was revealed that the thickness of ITO influences its optical bandgap Eg due to the Burstein-Moss (B-M) shift. The band gap of 400 nm ITO increased by 0.14 eV compared to the 100 nm thick ITO, and the Voc of the related BSTUT CIGSe solar cells raised by 0.043 V as a result of the diminished Schottky barrier Φ b at the ITO/CIGSe interface. Secondly, 0–8 mg of NaF used for post deposition treatment (PDT) of the CIGSe were applied to the BSTUT solar cells. Compared to the reference without NaF, 8 mg NaF PDT enhanced the carrier density NA from 2 × 1015cm−3 to 1.2 × 1016cm−3 and diminished the ITO/CIGSe Schottky barrier Φ b by 0.21 eV. In conclusion, we found that NaF PDT can tune the carrier density of ultra-thin CIGSe on ITO, and both thicker ITO and higher NaF PDT dose can reduce the ITO/CIGSe Schottky barrier. These discoveries enable future optimization of BSTUT CIGSe solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Enhanced performance of ultra-thin Cu(In,Ga)Se2 solar cells deposited at low process temperature10.1016/j.solmat.2014.08.045 ↗
2. Efficiency increased to 15.2% for ultra-thin Cu(In,Ga)Se2 solar cells
3. Cd-free Cu(In,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
4. Development of reflective back contacts for high-efficiency ultrathin Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2018.12.041 ↗
5. Reflective back contacts for ultrathin Cu(In,Ga)Se2-based solar cells10.1109/JPHOTOV.2019.2945196 ↗
6. Light coupling and trapping in ultrathin Cu(In,Ga)Se2 solar cells using dielectric scattering patterns10.1021/acsnano.5b04091 ↗
7. Nanoparticles for light management in ultrathin chalcopyrite solar cells10.1557/jmr.2016.382 ↗
8. Review on light management by nanostructures in chalcopyrite solar cells10.1088/1361-6641/aa59ee ↗
9. Integration of plasmonic Ag nanoparticles as a back reflector in ultra-thin Cu(In,Ga)Se2 solar cells10.1016/j.apsusc.2015.07.195 ↗
10. Light absorption enhancement for ultra-thin Cu(In1−xGax)Se2 solar cells using closely packed 2-D SiO2 nanosphere arrays10.1016/j.solmat.2016.04.012 ↗
11. Well-controlled dielectric nanomeshes by colloidal nanosphere lithography for optoelectronic enhancement of ultrathin Cu(In,Ga)Se2 solar cells10.1021/acsami.6b10135 ↗
12. Optoelectronic enhancement of ultrathin CuIn1-xGaxSe2Solar cells by nanophotonic contacts10.1002/adom.201600637 ↗
13. Light trapping in ultrathin CuIn1-xGaxSe2 solar cells by dielectric nanoparticles10.1016/j.solener.2018.01.096 ↗
14. Rear point contact structures for performance enhancement of semi-transparent ultrathin Cu(In,Ga)Se2 solar cells10.1016/j.solmat.2019.03.025 ↗
15. Flexible and semi‐transparent ultra‐thin CIGSe solar cells prepared on ultra‐thin glass substrate: a key to flexible bifacial photovoltaic applications10.1002/adfm.202001775 ↗
16. Microstructural and diffusion properties of CIGS thin film solar cells fabricated using transparent conducting oxide back contacts10.1016/j.tsf.2004.11.142 ↗
17. Novel device structure for Cu(In,Ga)Se2 thin film solar cells using transparent conducting oxide back and front contacts10.1016/j.solener.2004.08.010 ↗
18. Impacts of pulsed-laser assisted deposition on CIGS thin films and solar cells10.1016/j.solmat.2010.11.022 ↗
19. Alternative device structures for CIGS-based solar cells with semi-transparent absorbers
20. Development of semitransparent CIGS thin-film solar cells modified with a sulfurized-AgGa layer for building applications10.1039/C6TA01909A ↗
21. Insertion of the AGS layer at the CIGSe/ITO interface: a way to reduce the formation of the GaO x interfacial phase in CIGSe solar cells10.1016/j.solmat.2017.12.020 ↗
22. Performance and uniformity Improvement in ultrathin Cu(In,Ga)Se2 solar cells with a WOx nano-interlayer at the absorber/transparent back-contact Interface10.1021/acsami.8b15930 ↗
23. The role of NaF post-deposition treatment on the photovoltaic characteristics of semitransparent ultrathin Cu(In,Ga)Se2 solar cells prepared on indium-tin-oxide back contacts: a comparative study10.1039/C9TA06274B ↗
24. Cu(In,Ga)Se2 superstrate solar cells: prospects and limitations10.1002/pip.2536 ↗
25. Control of structural and electrical properties of Indium tin oxide (ITO)/Cu(In,Ga)Se2 Interface for transparent back-contact applications10.1021/acs.jpcc.8b11149 ↗
26. Effect of KF absorber treatment on the functionality of different transparent conductive oxide layers in CIGSe solar cells10.1002/pip.2925 ↗
27. Bifacial Cu(In,Ga)Se2 solar cells using hydrogen-doped In2O3 films as a transparent back contact
28. Using hydrogen-doped In2O3 films as a transparent back contact in (Ag,Cu)(In,Ga)Se2 solar cells10.1002/pip.2977 ↗
29. Sodium control in Ultrathin Cu(In,Ga)Se2 solar cells on transparent back contact for efficiencies beyond 12%
30. Is a passivated back contact always beneficial for Cu(In,Ga)Se2 solar cells
31. Influence of substrate and its temperature on the optical constants of CuIn1−xGaxSe2thin films10.1088/0022-3727/47/13/135101 ↗
32. A method for calculating the complex refractive index of inhomogeneous thin films10.1088/0022-3727/47/20/205301 ↗
33. The effect of surface roughness on the determination of optical constants of CuInSe2 and CuGaSe2 thin films10.1063/1.4809550 ↗
34. Effect of film thickness on the properties of indium tin oxide thin films10.1063/1.1318368 ↗
35. Electrical, optical, and structural properties of indium–tin–oxide thin films for organic light-emitting devices10.1063/1.371708 ↗
36. Influence of deep traps on the measurement of free‐carrier distributions in semiconductors by junction capacitance techniques10.1063/1.1663500 ↗
37. Sze · 2007
38. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
39. Transparent thin films of indium tin oxide: morphology–optical investigations, inter dependence analyzes10.1016/j.apsusc.2017.02.106 ↗
40. The effects of film thickness on the electrical, optical, and structural properties of cylindrical, rotating, magnetron-sputtered ITO films10.1016/j.apsusc.2018.01.318 ↗
41. Scheer · 2011 · vol. 12 · 69469
42. Carrier density dependence of optical band gap and work function in Sn-doped In2O3Films
43. Plasma treatment of ITO cathode to fabricate free electron selective layer in inverted polymer solar cells10.1039/C4TC01777C ↗
44. No evidence for passivation effects of Na and K at grain boundaries in polycrystalline Cu(In,Ga)Se2Thin films for solar cells10.1002/solr.201900095 ↗
45. Direct evidence for grain boundary passivation in Cu(In,Ga)Se2 solar cells through alkali-fluoride post-deposition treatments10.1038/s41467-019-11996-y ↗
46. Microscopic origins of performance losses in highly efficient Cu(In,Ga)Se2 thin-film solar cells10.1038/s41467-020-17507-8 ↗
47. Electrostatic potential fluctuations and light‐soaking effects in Cu(In,Ga)Se2 solar cells
48. Optoelectronic inactivity of dislocations in Cu(In,Ga)Se2 thin films10.1002/pssr.202100042 ↗
49. Photocurrent collection in thin film solar cells-calculation and characterization for CuGaSe2/(Zn,Cd)S