journal article·2021-09

Nanoencapsulation of binary nitrate molten salts for thermal energy storage: Synthesis, thermal performance, and thermal reliability

Jaejun Lee, Byeongnam Jo

Publisher page

Abstract

Abstract Molten salts have favorable features to serve as thermal energy storage (TES) media, and their nano-sized capsules are advantageous for efficient TES. However, their high water solubility hinders encapsulation by conventional methods, such as the sol–gel process. In this study, a binary nitrate molten salt mixture (NaNO3 and KNO3 in 60:40 mass ratio) was nanoencapsulated by a silica (SiO2) shell using emulsification and sol–gel techniques. The diameters of the molten salt capsules were controlled from a few micrometers to several hundred nanometers by regulating the stirring intensity and surfactant dosage during the synthesis process. Based on differential scanning calorimetry measurements, the encapsulation ratio and encapsulation efficiency were calculated 50.6% and 50.0%, respectively. Thermogravimetric analysis confirmed that the thermally stable SiO2 shell enhances the decomposition temperature of the binary nitrate salt mixture. Finally, the proposed nanoencapsulation protocol was also utilized to encapsulate a different nitrate salt mixture (NaNO3 and KNO3 in 80:20 mass ratio) and two single nitrate salts (NaNO3 and KNO3). This was done to validate both its applicability to all nitrate salt mixtures and the consistency of the chemical composition in each nanocapsule. The achievement for these nitrates suggests the possibility of comprehensive nanoencapsulation of water-soluble materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. A review on current status and challenges of inorganic phase change materials for thermal energy storage systems10.1016/j.rser.2016.12.012 ↗
2. Review on nanoencapsulated phase change materials: preparation, characterization and heat transfer enhancement10.1016/j.nanoen.2015.02.016 ↗
3. A review on encapsulation techniques for inorganic phase change materials and the influence on their thermophysical properties10.1016/j.rser.2017.01.159 ↗
4. Phase change materials integrated solar thermal energy systems: global trends and current practices in experimental approaches10.1016/j.est.2019.101118 ↗
5. Silica encapsulation of n-octadecane via sol-gel process: a novel microencapsulated phase-change material with enhanced thermal conductivity and performance10.1016/j.jcis.2009.11.036 ↗
6. Nanoencapsulation of n-octadecane phase change material with silica shell through interfacial hydrolysis and polycondensation in miniemulsion10.1016/j.energy.2015.10.024 ↗
7. Synthesis, characterization and thermal properties of nanoencapsulated phase change materials via sol-gel method10.1016/j.energy.2013.09.012 ↗
8. Microencapsulation of molten salt in stable silica shell via a water-limited sol-gel process for high temperature thermal energy storage10.1016/j.applthermaleng.2018.02.050 ↗
9. Surfactant-free microencapsulation of sodium nitrate for high temperature thermal energy storage10.1016/j.matlet.2020.127576 ↗
10. Surfactant-free synthesis protocol of robust and sustainable molten salt microcapsules for solar thermal energy storage10.1016/j.solmat.2020.110954 ↗
11. D-mannitol@silica/graphene oxide nanoencapsulated phase change properties and thermal reliability10.1016/j.apenergy.2020.115020 ↗
12. Intelligent micro- and nanocapsules10.1016/j.progpolymsci.2005.06.008 ↗
13. Thermal influence in corrosion properties of Chilean solar nitrates10.1016/j.solener.2014.07.027 ↗
14. High temperature corrosion behavior on molten nitrate salt-based nanofluids for CSP plants10.1016/j.renene.2018.07.018 ↗
15. Preparation of microencapsulated KNO3 by solvothermal technology for thermal energy storage10.1007/s10973-019-08825-1 ↗
16. An experimental study of stability of oil-water emulsion10.1016/j.fuproc.2004.03.010 ↗
17. Melting-point depression by insoluble impurities: a finite size effect10.1103/PhysRevLett.101.023401 ↗
18. Development of molten salt heat transfer fluid with low melting point and high thermal stability10.1115/1.4004243 ↗