journal article·2021-06

Rapid bleaching of photoelectrochromic device by the simple addition of Pt catalyst in WO3 layer

Saad Sarwar, Sunghyeok Park, Thuy Thi Dao, Sungjun Hong, Chi-Hwan Han

Publisher page

Abstract

Abstract We have developed a transparent conducting oxide (TCO) free photoelectrochromic device with fast kinetics. The device can be colored fully in 3 min and bleach 95% within 30 min in dark. The addition of Pt catalyst in the WO3 layer catalyzes the back reaction in dark. The coloring is not affected by the addition of catalyst on the WO3 layer and the device shows the same amount of coloring as in the reference device. Both devices took 3 min to color completely but bleaching time was improved by a large margin. The reference device which does not have any Pt in WO3 or TiO2 layer takes 24 h to bleach fully compared to 30 min bleaching of Pt added device. The commercial feasibility of the device was checked by making a large area (60x48 cm2) prototype Further the thermal stability of the device was checked by keeping it under thermal stress at 65 °C. It was observed that the device was stable after 300 h. This device paves the way for commercializing the photoelectrochromic windows without the use of external power and transparent conducting oxide.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. 2020
2. Šajn · 2016
3. Low pressure CVD of electrochromic WO 3 at 400°C10.1149/2.0281509jes ↗
4. State-of-the-art of chemically grown vanadium pentoxide nanostructures with enhanced electrochemical properties10.5185/amlett.2013.5485 ↗
5. Forthcoming perspectives of photoelectrochromic devices: a critical review10.1039/C6EE01514J ↗
6. Development of photochromic device with magnetron sputtered titanium dioxide and tungsten trioxide films10.1016/j.solmat.2017.03.020 ↗
7. A photochromic single glass pane10.1016/j.solmat.2018.06.035 ↗
8. Scalable photoelectrochromic glass of high performance powered by ligand attached TiO2 photoactive layer10.1016/j.solmat.2020.110498 ↗
9. Visible light active novel WO3 nanospheres for methylene blue degradation
10. Unraveling the intercalation chemistry of hexagonal tungsten bronze and its optical responses10.1021/acs.chemmater.5b03980 ↗
11. Highly efficient smart photovoltachromic devices with tailored electrolyte composition10.1039/c1ee01231b ↗
12. Photovoltachromic device with a micropatterned bifunctional counter electrode10.1021/am404800m ↗
13. Fabrication of stable photovoltachromic cells using a solvent-free hybrid polymer electrolyte10.1039/C4NR01695E ↗
14. Photoelectrochromic performance of tungsten oxide based devices with PEG-titanium complex as solvent-free electrolytes10.1016/j.solmat.2011.05.004 ↗
15. Enhanced electrochromic characteristics induced by Au/PEDOT/Pt microtubes in WO3 based electrochromic devices10.1016/j.optmat.2018.11.052 ↗
16. Highly optical performance photoelectrochromic device based on Br-/Br3- electrolyte10.1016/j.electacta.2016.01.155 ↗
17. A photoelectrochromic device based on gel electrolyte with a fast switching rate10.1016/j.solmat.2011.03.033 ↗
18. Self-doped tungsten oxide films induced by: in situ carbothermal reduction for high performance electrochromic devices10.1039/D0TC03103H ↗
19. Electrochromic properties of silver nanowire-embedded tungsten trioxide thin films fabricated by electrodeposition10.1016/j.ceramint.2020.08.076 ↗
20. Fast, self-supplied, all-solid photoelectrochromic film10.1016/j.jpowsour.2010.01.037 ↗
21. Exposure potential and health impacts of indium and gallium, metals critical to emerging electronics and energy technologies10.1007/s40572-016-0118-8 ↗
22. Influence of single-nanoparticle electrochromic dynamics on the durability and speed of smart windows10.1073/pnas.1822007116 ↗
23. Rate-determining processes in photoelectrochromic devices
24. Preparation of Pt/WO 3 -coated polydimethylsiloxane membrane for transparent/flexible hydrogen gas sensors10.1016/j.matchemphys.2018.12.052 ↗
25. formation of subsurface W5+ species in gasochromic Pt/WO3 thin films exposed to hydrogen10.1021/acs.jpcc.7b03385 ↗
26. Low-temperature chemical fabrication of WO3 gasochromic switchable films: a comparative study of Pd and Pt nanoparticles dispersed WO3 films based on their structural and chemical properties10.1016/j.tsf.2020.138201 ↗
27. Efficient WO3 photoanode modified by Pt layer and plasmonic Ag for enhanced charge separation and transfer to promote photoelectrochemical performances
28. Site-selective Pt dewetting on WO3-coated TiO2 nanotube arrays: an electron transfer cascade-based H2 evolution photocatalyst10.1016/j.apcatb.2018.05.061 ↗
29. Screen-printed nano-grain WO3 films for micro-hotplate gas sensors
30. Modification of metal nanoparticles with TiO2 and metal-support interaction in photodeposition10.1021/cs100072k ↗
31. Pt modified ultrafine WO3 nanofibers: a combined first-principles and experimental study10.1016/j.matlet.2018.10.117 ↗
32. On-line monitoring of CO2 quality using doped WO3 thin film sensors10.1016/j.tsf.2005.11.021 ↗
33. The effects of Pt doping on the structure and visible light photoactivity of titania nanotubes10.1021/jp108659a ↗
34. Preparation and characterisation of nano-structured WO3-TiO 2 layers for photoelectrochromic devices10.1007/s10971-005-4794-3 ↗
35. Perovskite photovoltachromic cells for building integration10.1039/C5EE00896D ↗