Thermodynamic modeling and experimental verification of new eutectic salt mixtures as thermal energy storage materials
Source abstract
Abstract
Abstract In this work, modified BET model was applied to obtain phase diagrams and to design new eutectic mixtures. As a result, the eutectic composition and the melting point of two mixtures based on salt hydrates: LiNO3·3H2O–NaNO3–Mn(NO3)2·6H2O and LiNO3·3H2O–Mn(NO3)2·6H2O–Mg(NO3)2·6H2O were predicted. Both mixtures present the same predicted melting temperature of 10.8 °C. Experimental verifications by T-history method showed satisfactory accordance of the predicted temperatures values with a difference of 0 °C and +2.3 °C for the mixtures, with sodium nitrate and magnesium nitrate, respectively. It is added that the thermal and physical properties such as density, the heat capacity for solid and liquid phases, as well as viscosity and volume change during the fusion of the new PCMs were evaluated. The results of the characterization, the energy storage density (about 300 MJ m−3) and material cost estimation show that both mixtures are promising candidates for use in low temperature energy storage systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Theoretical prediction and experimental determination of room-temperature phase change materials using hydrated salts as agents10.1007/s10973-009-0206-1 ↗
2. Experimental verification of theoretically estimated composition and enthalpy of fusion of eutectic salt mixtures10.1016/j.solmat.2017.09.033 ↗
3. Calculation of salt activities in molten salt hydrates applying the modified BET equation (I): binary system10.1007/BF00816406 ↗
4. BET model for calculating activities of salt and water, molar enthalpies, molar volumes and liquid - solid phase behavior in concentrated electrolyte solutions10.1016/0378-3812(93)85028-K ↗
5. Phase diagram calculation of molten hydrates using the modified BET equation10.1016/j.calphad.2003.09.004 ↗
6. Phase diagram prediction of system Mn(NO3)2-M(NO3)n-H2O (M = Ca, Mg and Li) with modified BET model
7. Study on differential scanning calorimetry analysis with two operation modes and organic and inorganic phase change material (PCM)10.1016/j.tca.2012.11.027 ↗
8. Measurement of the enthalpy of PCM
9. A simple method, the T-history method, of determining the heat of fusion, specific heat and thermal conductivity of phase-change materials10.1088/0957-0233/10/3/015 ↗
10. A study of accurate latent heat measurement for a PCM with a low melting temperature using the T-history method10.1016/j.ijrefrig.2005.12.014 ↗
11. Preparation and characterization of an inorganic magnesium chloride/nitrate/graphite composite for low temperature energy storage10.1016/j.solmat.2017.09.046 ↗
12. Review on thermal energy storage with phase change materials, heat transfer analysis and applications10.1016/S1359-4311(02)00192-8 ↗
13. Phase Change materials for low temperature solar thermal applications
14. Three-step method to determine the eutectic composition of binary and ternary mixtures10.1007/s10973-014-3783-6 ↗
15. Low temperature latent heat thermal energy storage: heat storage materials10.1016/0038-092X(83)90186-X ↗
16. Phase diagram prediction of the quaternary system LiNO3-Mg(NO3)2-NH4NO3-H2O and research of related phase change material
17. Short-term storage of solar energy 1. Low temperature phase change materials
18. Thermodynamics study of the system (LiCl+LiNO3+H2O)10.1016/j.jct.2007.06.018 ↗
19. Novel inorganic binary mixture for low-temperature heat storage applications10.1002/er.3805 ↗
20. Thermophysical characterization of a by-product from the non-metallic industry as inorganic PCM10.1016/j.solmat.2014.08.042 ↗
21. Densities of solid and molten salt hydrates and their mixtures and viscosities of the molten salts10.1021/je049849b ↗
22. Thermophysical properties of lithium nitrate trihydrate from (253 to 353) K10.1021/je3000469 ↗
23. Materials used as PCM in thermal energy storage in buildings: a review10.1016/j.rser.2010.11.018 ↗
24. Thermal energy storage materials and systems for solar energy applications10.1016/j.rser.2016.10.021 ↗
25. Heat capacities and latent heats of LiNO3, NaNO3, and KNO310.1007/BF01133275 ↗
26. Influence of the experimental conditions on the subcooling of Glauber's salt when used as PCM10.1016/j.solmat.2012.03.003 ↗
27. Enthalpy-temperature plots to compare calorimetric measurements of phase change materials at different sample scales10.1016/j.est.2017.11.002 ↗
28. Thermal performance evaluation of bischofite at pilot plant scale10.1016/j.apenergy.2015.06.042 ↗
29. Thermal characteristics of manganese (II) nitrate hexahydrate as a phase change material for cooling systems10.1016/S1359-4311(02)00161-8 ↗
30. Low temperature heat storage with phase change materials10.1080/01430750.1980.9675731 ↗