Design, formation, and property of high emissivity WSi2-Si-glass hybrid coating on fibrous ZrO2 ceramic for reusable thermal protection system
Source abstract
Abstract
Abstract The objective of this research was to develop a high emissivity coating on the low thermal conductive insulation for reusable thermal protection system. The design principles including high emissivity, match of the coefficients of thermal expansion and excellent high temperature stability were proposed for the first time. A novel WSi2-Si-glass hybrid coating with optimized composition was successfully prepared on fibrous ZrO2 ceramic insulation by slurry dipping and subsequent high temperature rapid sintering method. The total emissivity of the as-prepared coating is up to 0.92 in wavelength of 0.3–2.5 µm. After oxidation at 1673 K for 100 h and 1773 K for 20 h, the total emissivity values of the coatings are still as high as 0.89 and 0.87. A competitive mechanism between the “defects formation” caused by aging stress, the CTE mismatch stress and the volatilization of low melting point oxides and the “defects healing” resulted from self–healing phases during the different oxidizing conditions was discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aerogels and thermal insulation · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Significantly enhanced infrared emissivity of LaAlO3 by co-doping with Ca2+ and Cr3+ for energy-saving applications10.1111/jace.13706 ↗
2. Evaluation of high-emissivity coatings in steam cracking furnaces using a non-grey gas radiation model10.1016/j.cej.2007.04.042 ↗
3. High emissivity coatings for high temperature application: progress and prospect10.1016/j.tsf.2009.03.175 ↗
4. A facile preparation of ceramic coatings on Ti alloys for thermal protection systems10.1016/j.solmat.2015.07.009 ↗
5. Reaction cured borosilicate glass coating for low-density fibrous silica insulation
6. Advanced porous coating for low‐density ceramic insulation materials10.1111/j.1151-2916.1989.tb06259.x ↗
7. A novel way to fabricate highly porous fibrous YSZ ceramics with improved thermal and mechanical properties10.1016/j.jeurceramsoc.2012.03.016 ↗
8. Thermal and mechanical properties of fibrous zirconia ceramics with ultra-high porosity10.1016/j.ceramint.2014.04.008 ↗
9. High emissivity MoSi2–ZrO2–borosilicate glass multiphase coating with SiB6 addition for fibrous ZrO2 ceramic10.1016/j.ceramint.2016.02.020 ↗
10. MoSi2-borosilicate glass coating on fibrous ceramics prepared by in-situ reaction method for infrared radiation10.1016/j.matdes.2016.04.065 ↗
11. Thermal shock behavior and infrared radiation property of integrative insulations consisting of MoSi2/borosilicate glass coating and fibrous ZrO2 ceramic substrate10.1016/j.surfcoat.2015.03.008 ↗
12. Gradient structure high emissivity MoSi2-SiO2-SiOC coating for thermal protective application10.1016/j.jallcom.2017.01.317 ↗
13. Microstructure, radiative property and thermal shock behavior of TaSi2–SiO2-borosilicate glass coating for fibrous ZrO2 ceramic insulation10.1016/j.jallcom.2015.10.003 ↗
14. High emissivity MoSi2–TaSi2–borosilicate glass porous coating for fibrous ZrO2 ceramic by a rapid sintering method10.1016/j.jallcom.2016.08.073 ↗
15. Evolution of microstructure and radiative property of metal silicide–glass hybrid coating for fibrous ZrO2 ceramic during high temperature oxidizing atmosphere10.1016/j.corsci.2017.06.017 ↗
16. Effect of TaSi2 content on the structure and properties of TaSi2-MoSi2-borosilicate glass coating on fibrous insulations for enhanced surficial thermal radiation10.1016/j.surfcoat.2017.03.031 ↗
17. Growth behavior and microstructure of oxide scales grown on WSi2 coating10.1016/j.intermet.2007.11.008 ↗
18. Multicomponent coating for enhanced oxidation resistance of tungsten10.1016/j.surfcoat.2012.08.011 ↗
19. SiC nanowire-toughened MoSi2-WSi2-SiC-Si multiphase coating for improved oxidation resistance of C/C composites10.1016/j.ceramint.2016.05.056 ↗
20. Microstructure and anti-oxidation properties of multi-composition ceramic coatings for carbon/carbon composites10.1016/j.ceramint.2010.08.027 ↗
21. Microstructure characteristics and oxidation behavior of vacuum plasma sprayed tungsten disilicide coating10.1016/j.ceramint.2016.09.024 ↗
22. Hot corrosion behavior of CoWSi/WSi2 coating exposed to Na2SO4+NaCl salt at 900°C10.1016/j.ceramint.2015.11.064 ↗
23. Growth kinetics and oxidation behavior of WSi2 coating formed by chemical vapor deposition of Si on W substrate10.1016/j.jallcom.2005.11.002 ↗
24. High emissivity coatings based on polysilazanes for flexible Cu(In,Ga)Se2 thin-film solar cells10.1016/j.solmat.2014.01.027 ↗
25. Suitability of layered Ti3SiC2 and Zr3[Al (si)]4C6 ceramics as high temperature solar absorbers for solar energy applications10.1016/j.solmat.2014.12.008 ↗
26. First principles investigation of the electronic, elastic and vibrational properties of tungsten disilicide10.1016/j.jallcom.2012.11.109 ↗
27. John · 2010
28. Enhanced infrared emissivity of CeO2 coatings by La doping10.1016/j.apsusc.2013.05.034 ↗
29. Influences of lattice vibration and electron transition on thermal emissivity of Nd3+ doped LaMgAl11O19 hexaaluminates for metallic thermal protection system10.1063/1.4759006 ↗
30. Emissivity and catalycity measurements on SiC-coated carbon fibre reinforced silicon carbide composite10.1016/j.jeurceramsoc.2008.12.011 ↗
31. Effect of SiC coating and heat treatment on the thermal radiation properties of C/SiC composites10.1016/j.jeurceramsoc.2013.12.012 ↗
32. The improved thermal radiation property of SiC doped microarc oxidation ceramic coating formed on niobium metal for metal thermal protective system10.1016/j.surfcoat.2016.10.070 ↗
33. Oxidation protection of C/C composites with a multilayer coating of SiC and Si plus SiC plus SiC nanowires10.1016/j.carbon.2011.10.048 ↗
34. Effect of glass phase content on structure and properties of gradient MoSi2–BaO–Al2O3–SiO2 coating for porous fibrous insulations10.1016/j.jallcom.2015.09.099 ↗
35. Viscosity control of borosilica by Fe doping in Mo–Si–B environmentally resistant alloys10.1016/j.corsci.2015.05.051 ↗
36. An XPS study of the UV reduction and photochromism of MoO3 and WO310.1063/1.443047 ↗
37. Microstructure evolution of a W-doped ZrB2 ceramic upon high-temperature oxidation10.1111/jace.14738 ↗
38. Laser cladding of CoWSi/WSi2 on Ni substrate and evaluation of its high temperature oxidation behavior10.1016/j.ceramint.2014.05.065 ↗
39. Silicide coating fabricated by HAPC/SAPS combination to protect niobium alloy from oxidation10.1021/acsami.6b04599 ↗