Sentaurus modelling of 6.9% Cu2ZnSnS4 device based on comprehensive electrical & optical characterization
Source abstract
Abstract
Abstract In this work we perform comprehensive characterization on a 6.9% pure sulphide Cu 2 ZnSnS 4 (CZTS) device and construct a 2D device model in Sentaurus TCAD to identify possible roots of performance bottlenecks. Electrical and optical parameters of the absorber from comprehensive electrical and optical characterization, together with other necessary parameters from literature, we successfully reproduce measured current density-voltage (J-V) and external quantum efficiency (EQE) curves. Absorption coefficient is extracted by fitting measured internal quantum efficiency (IQE). At the buffer/absorber interface, a surface recombination velocity of 1×10 5 cm/s is identified to adequately describe measured spectral response at the near-interface region. Furthermore, a bulk lifetime of ~29 ns is extracted from effective lifetime modelling in conjunction with time resolved photoluminescence (TRPL) results. The key underlying V oc deficit, ~200 mV, is pinpointed to bandgap fluctuation, which is backed by the simulation study on both QE tail and steady state photoluminescence.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Technology Roadmap: Solar Photovoltaic Energy in - 2014 edition.
2. H. Hiroi, Y. Iwata, S. Adachi, H. Sugimoto, A. Yamada, New World-Record Efficiency for Pure-Sulfide Cu (In, Ga) S Thin-Film Solar Cell With Cd-Free Buffer Layer via KCN-Free Process, 2016.10.1109/JPHOTOV.2016.2537540 ↗
3. K. Hayes, CdTe Solar Cell Optimization by Planar and Transmission EBSD.
4. Atom-probe tomographic study of interfaces of Cu2ZnSnS4 photovoltaic cells10.1063/1.4894858 ↗
5. Semi-empirical device model for Cu2ZnSn (S, Se) 4 solar cells10.1063/1.4890844 ↗
6. Loss mechanisms in hydrazine-processed Cu2ZnSn (Se, S) 4 solar cells10.1063/1.3522884 ↗
7. Why are kesterite solar cells not 20% efficient?10.1016/j.tsf.2012.12.089 ↗
8. Band tailing and efficiency limitation in kesterite solar cells10.1063/1.4820250 ↗
9. Combining strong interface recombination with bandgap narrowing and short diffusion length in Cu2ZnSnS4 device modeling10.1016/j.solmat.2015.09.019 ↗
10. Impact of bulk properties and local secondary phases on the Cu2(Zn,Sn)Se4 solar cells open-circuit voltage10.1016/j.solmat.2014.10.042 ↗
11. Sentaurus vL-2016.03, in, Synopsys Inc., Mountain View, CA.
12. A. Kanevce, D. Kuciauskas, T.A. Gessert, D.H. Levi, D.S. Albin, Impact of interface recombination on time resolved photoluminescence (TRPL) decays in CdTe solar cells (numerical simulation analysis), in: Proceedings of the Photovoltaic Specialists Conference (PVSC), 2012 38th IEEE, IEEE, 2012, pp. 000848–000853.10.1109/PVSC.2012.6317736 ↗
13. Characterization of chemical bath deposited CdS thin films at different deposition temperature10.1016/j.jallcom.2009.12.088 ↗
14. Boosting the efficiency of pure sulfide CZTS solar cells using the In/Cd-based hybrid buffers10.1016/j.solmat.2015.10.019 ↗
15. Electrical and optical properties of Cu2ZnSnS4 thin films prepared by rf magnetron sputtering process10.1016/S0927-0248(02)00127-7 ↗
16. Band alignments of different buffer layers (CdS, Zn (O, S), and In2S3) on Cu2ZnSnS410.1063/1.4873715 ↗
17. Surface effects on p-n junctions: characteristics of surface space-charge regions under non-equilibrium conditions10.1016/0038-1101(66)90118-3 ↗
18. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth‐abundant solar cell absorbers10.1002/adma.201203146 ↗
19. Optical properties of Cu (In, Ga) Se2 and Cu2ZnSn (S, Se)410.1016/j.tsf.2010.12.217 ↗
20. Bulk and metastable defects in CuIn1-xGaxSe2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
21. Characterization of a Cu2ZnSnS4 solar cell fabricated by sulfurization of metallic precursor Mo/Zn/Cu/Sn
22. Effect of sodium on material and device quality in low temperature deposited Cu (In, Ga) Se210.1016/j.solmat.2013.08.029 ↗
23. Thin film solar cell with 8.4% power conversion efficiency using an earth‐abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
24. An alternative proof of the generalized reciprocity theorem for charge collection10.1063/1.343932 ↗
25. Characterising superstrate CIS solar cells with electron beam induced current10.1016/S0040-6090(99)00793-2 ↗
26. Ultrafast carrier dynamics in Cu (In, Ga) Se2 thin films probed by femtosecond pump-probe spectroscopy10.1364/OE.20.012675 ↗
27. Limitation factors for the performance of kesterite Cu2ZnSnS4 thin film solar cells studied by defect characterization10.1039/C5RA00069F ↗
28. The role of structural properties on deep defect states in Cu2ZnSnS4 studied by photoluminescence spectroscopy10.1063/1.4750249 ↗
29. Photoluminescence study of defect clusters in Cu2ZnSnS4 polycrystals10.1016/j.cap.2013.12.029 ↗
30. Microphotoluminescence study of Cu2ZnSnS4 polycrystals10.1117/1.JPE.3.030599 ↗
31. Cu–Zn disorder and band gap fluctuations in Cu2ZnSn (S, Se)4: theoretical and experimental investigations
32. Abundance of CuZn+SnZn and 2CuZn+SnZn defect clusters in kesterite solar cells10.1063/1.4768215 ↗
33. Efficiency limitations of polycrystalline thin film solar cells: case of Cu (In, Ga) Se210.1016/j.tsf.2004.11.052 ↗
34. A detailed study of p–n junction solar cells by means of collection efficiency10.1016/j.solmat.2006.08.002 ↗
35. Generalized relationship between dark carrier distribution and photocarrier collection in solar cells10.1063/1.364108 ↗
36. Do built‐in fields improve solar cell performance?10.1002/pip.851 ↗
37. Minority carrier diffusion length extraction in Cu2ZnSn (Se, S)4 solar cells10.1063/1.4821841 ↗
38. Advanced modeling of the effective minority carrier lifetime of passivated crystalline silicon wafers10.1063/1.4749572 ↗
39. Analysis of charge separation dynamics in a semiconductor junction10.1103/PhysRevB.71.035301 ↗
40. Blocking thin-film nonuniformities: photovoltaic self-healing10.1063/1.1644049 ↗
41. V. Karpov, D. Shvydka, Y. Roussilon, A. Compaan, The mesoscale physics of large-area photovoltaics, in: Proceedings of the Photovoltaic Energy Conversion, 3rd World Conference on, IEEE, 2003, pp. 495–498.
42. Effects of nonuniformity in thin-film photovoltaics10.1063/1.1483118 ↗
43. Solar‐cell collection efficiency and its variation with voltage10.1063/1.355842 ↗
44. Shklovskii · 2013
45. Light absorption and emission in semiconductors with band gap fluctuations—A study on Cu (In, Ga) Se2 thin films10.1063/1.2721768 ↗
46. Anomalous persistent photoconductivity in Cu2ZnSnS4 thin films and solar cells10.1016/j.solmat.2015.02.001 ↗
47. Over 9% efficient kesterite Cu2ZnSnS4 solar cell fabricated by using Zn1–xCdxS buffer layer10.1002/aenm.201600046 ↗
48. M. Nakamura, T. Kato, R. Kamada, H. Sugimoto, Current status at solar frontier: from fundamental research to industrial mass production of Cd-free Cu (In, Ga)(Se, S) 2 solar cell, in: Proceedings of the Photovoltaic Specialist Conference (PVSC), 2015 IEEE 42nd, IEEE, 2015, pp. 1–4.10.1109/PVSC.2015.7355963 ↗
49. 960-mV open-circuit voltage chalcopyrite solar cell10.1109/JPHOTOV.2015.2479470 ↗
50. A new recombination model for device simulation including tunnelinG10.1109/16.121690 ↗