Effect of ultraviolet–ozone on ITO/P3HT interface for PEDOT:PSS-free polymer solar cells
Source abstract
Abstract
Abstract A simple device structure of bulk hetero-junction polymer solar cells (PSCs) with poly(3-hexylthiophene) and phenyl-C61-butyric acid methyl ester (P3HT:PCBM) is demonstrated without poly(3,4-ethylenedioxythiophene):poly(styrene-sulfonate) (PEDOT:PSS). Ultraviolet (UV)–ozone treatment alters the surface atomic compositions making it oxygen rich and carbon deficient. These chemical changes increase the workfunction of indium tin oxide (ITO) by 0.2 eV. The ITO anode with high workfunction results in efficient hole collection at ITO/P3HT interface. This method makes it possible to eliminate PEDOT:PSS with high efficiency of 3.35%, identical to the device with PEDOT:PSS (3.35%). In addition, the PSC with UV–ozone treated ITO anode shows 3.6 times longer life-time than that with PEDOT:PSS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Advanced materials and processes for polymer solar cell devices10.1039/B913168J ↗
2. Polymer solar cells: recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
3. Organic tandem solar cells: a review10.1039/b817952b ↗
4. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
5. Interface engineering for organic electronics10.1002/adfm.200902236 ↗
6. Interface investigation and engineering – achieving high performance polymer photovoltaic devices10.1039/b925382c ↗
7. Anode interfacial tuning viaelectron-blocking/hole-transport layers andindium tin oxide surface treatment in bulk-heterojunction organic photovoltaic cells10.1002/adfm.200901045 ↗
8. BCP/Ag/MoO3 transparent cathodes for organicphotovoltaics10.1002/aenm.201100411 ↗
9. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
10. Enhancement of hole injection in organic TFTs by ozone treatment of indium tin oxide electrodes10.1149/1.2713664 ↗
11. Three-dimensional nanobranched indium-tin-oxide anode for organic solar cells10.1021/nn2025836 ↗
12. Effects of thickness and thermal annealing of the PEDOT:PSS layer on the performance of polymer solar cells10.1016/j.orgel.2008.10.003 ↗
13. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
14. Control of the surface composition of a conducting-polymer complex film to tune the work function10.1002/adfm.200700766 ↗
15. Microscopic understanding of the anisotropic conductivity of PEDOT:PSS thin films10.1002/adma.200602575 ↗
16. Three-dimensional inhomogeneities in PEDOT:PSS films10.1021/jp0464674 ↗
17. Transition metal oxide as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
18. p-type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
19. Morphological and electrical effect of an ultrathin iridium oxide hole extraction layer on P3HT:PCBM bulk-heterojunction solar cells10.1016/j.solmat.2010.12.039 ↗
20. Improving performance of organic solar cells using amorphous tungsten oxides as an interfacial buffer layer on transparent anodes10.1016/j.orgel.2009.03.016 ↗
21. Effect of NiOx thin layer fabricated by oxygen-plasma treatment on polymer photovoltaic cell10.1016/j.solmat.2010.04.077 ↗
22. Independent control of open-circuit voltage of organic solar cells by changing film thickness of MoO3 buffer layer10.1063/1.2949321 ↗
23. Solution-processable graphene oxide as an efficient hole transport layer in polymer solar cells10.1021/nn100551j ↗
24. Solution-processable reduced graphene oxide as a novel alternative to PEDOT:PSS hole transport layers for highly efficient and stable polymer olar cells10.1002/adma.201102207 ↗
25. Solution processable nanocarbon platform for polymer solar cells10.1039/c1ee01333e ↗
26. Reduction of graphene oxide via l-ascorbic acid10.1039/B917705A ↗
27. Chlorinated indium tin oxide electrods with high work function for organic device compatibility10.1126/science.1202992 ↗
28. Polymer solar cells using chlorinated indium tin oxide electrodes with high work function as the anode10.1016/j.solmat.2011.10.002 ↗
29. Dependence of indium-tin-oxide work function on surface cleaning method as studied by ultraviolet and x-ray photoemission spectroscopies10.1063/1.371859 ↗
30. Effect of ultraviolet–ozone treatment of indium-tin-oxide on electrical properties of organic light emitting diodes10.1063/1.1635995 ↗
31. Mechanism for the increase of indium-tin-oxide work function by O2 inductively coupled plasma treatment10.1063/1.1633351 ↗
32. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
33. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗