Growth of Cu2ZnSnS4 thin films by a two-stage process—Effect of incorporation of sulfur at the precursor stage
Source abstract
Abstract
Abstract The effect of sulfur incorporation at the precursor stage on the growth and properties of Cu2ZnSnS4 (CZTS) thin films prepared by a two-stage process is investigated. Two stacks, one with the precursor sequence ZnS/Sn/Cu and the other with an additional sulfur layer in the stack, were deposited sequentially by thermal evaporation onto soda-lime glass substrates held at 300 °C and annealed at two different temperatures, 550 °C and 580 °C, to understand the effect of inclusion of sulfur precursor layer at the precursor stage. These films were analyzed by studying their elemental composition, structural, microstructural and optical properties. CZTS films exhibiting kesterite structure with (112) preferred orientation are obtained. The lattice parameters are found to be a=0.542 nm and c=1.089 nm. The crystallinity and the grain size are found to increase with increase in annealing temperature. With the inclusion of sulfur precursor layer in the stack, CZTS growth occurred at the precursor stage itself. On annealing this stack at 550 °C for 30 min, CZTS films that consist of distinct and compact grains with size in the range 400–800 nm are obtained. Compared to this, the grain size of CZTS films obtained from the stack without sulfur layer in the precursor stage is found to be in the range 200–500 nm. The direct optical band gap of these films is found to be between 1.44 eV and 1.56 eV depending on the annealing temperature and duration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
2. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
3. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
4. Compositional investigation of potassium doped Cu(In, Ga)Se2 solar cells with efficiencies up to 20.8%
5. T. M. Friedlmeier, H. Dittrich, H.-W. Schock, Growth and characterization of Cu2ZnSnS4 and Cu2ZnSnSe4 thin films for photovoltaic applications, in: Institute of Physics Conference Series, vol. 152, Bristol, England, Adam Hilger, Ltd., Boston, 1985, pp. 345–348.
6. Fabrication of Cu2ZnSnS4 thin films by co-evaporation10.1002/pssc.200669631 ↗
7. Cu2ZnSnS4 thin film solar cells by fast co-evaporation10.1002/pip.976 ↗
8. Growth and characterization of co-evaporated Cu2ZnSnS4 thin films10.1063/1.4808256 ↗
9. Electrical and optical properties of stannite-type quaternary semiconductor thin films10.1143/JJAP.27.2094 ↗
10. Cu2ZnSnS4-type thin film solar cells using abundant materials10.1016/j.tsf.2006.12.103 ↗
11. Cu2ZnSnS4 thin films annealed in H2S atmosphere for solar cell absorber prepared by pulsed laser deposition10.1143/JJAP.47.602 ↗
12. Development of thin film solar cell based on Cu2ZnSnS4 thin films10.1016/S0927-0248(00)00088-X ↗
13. H. Katagiri, K. Jimbo, K. Moriya, K. Tsuchida, Solar cell without environmental pollution by using CZTS thin film, in: Proceedings of the Third World Conference on Photovoltaic Energy Conversion, Osaka, Japan, 2003, vol. 3, IEEE, pp. 2874–2879.
14. Electrical and optical properties of Cu2ZnSnS4 thin films prepared by rf magnetron sputtering process10.1016/S0927-0248(02)00127-7 ↗
15. Investigation of Cu2ZnSnS4-based thin film solar cells using abundant materials10.1143/JJAP.44.783 ↗
16. Preparation of Cu2ZnSnS4 thin films by hybrid sputtering10.1016/j.jpcs.2005.09.037 ↗
17. Preparation of Cu2ZnSnS4 thin films by sulfurization of stacked metallic layers10.1016/j.tsf.2008.09.058 ↗
18. New routes to sustainable photovoltaics10.1002/pssb.200879539 ↗
19. Synthesis and characterization of Cu2ZnSnS4 absorber layers by an electrodeposition-annealing route10.1016/j.tsf.2008.11.022 ↗
20. The crystallisation of Cu2ZnSnS4 thin film solar cell absorbers from co-electroplated Cu–Zn–Sn precursors10.1016/j.tsf.2008.11.019 ↗
21. Precursors׳ order effect on the properties of sulfurized Cu2ZnSnS4 thin films10.1088/0268-1242/24/10/105013 ↗
22. Growth of Cu2ZnSnS4 thin films using sulfurization of stacked metallic films10.1016/j.tsf.2010.03.058 ↗
23. Sprayed films of stannite Cu2ZnSnS410.1016/0169-4332(95)00225-1 ↗
24. Preparation and characterization of spray-deposited Cu2ZnSnS4 thin films10.1016/j.solmat.2009.01.011 ↗
25. Effect of starting solution pH on the growth of Cu2ZnSnS4 thin films deposited by spray pyrolysis10.1002/pssa.200824424 ↗
26. Single step electrosynthesis of Cu2ZnSnS4(CZTS) thin films for solar cell application10.1016/j.electacta.2010.02.051 ↗
27. Preparation of Cu2ZnSnS4 thin films by sulfurizing sol–gel deposited precursors10.1016/j.solmat.2007.04.012 ↗
28. Cu2ZnSnS4 thin film solar cells prepared by non-vacuum processing10.1016/j.solmat.2008.12.009 ↗
29. Preparation of Cu2ZnSnS4 thin films by sulfurizing stacked precursor thin films via successive ionic layer adsorption and reaction method10.1016/j.apsusc.2012.04.120 ↗
30. Cu2ZnSnS4 thin film solar cells utilizing sulfurization of metallic precursor prepared by simultaneous sputtering of metal targets10.7567/JJAP.50.01BG09 ↗
31. Rapid annealing of reactively sputtered precursors for Cu2ZnSnS4 solar cells10.1002/pip.2265 ↗
32. Fabrication of Cu2ZnSnS4 films by sulfurization of Cu/ZnSn/Cu precursor layers in sulfur atmosphere for solar cells10.1016/j.solmat.2011.07.017 ↗
33. Imaging and phase identification of Cu2ZnSnS4 thin films using confocal Raman spectroscopy10.1116/1.3625249 ↗
34. On the Sn loss from thin films of the material system Cu–Zn–Sn–S in high vacuum10.1063/1.3273495 ↗
35. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
36. On the formation mechanisms of Zn-rich Cu2ZnSnS4 films prepared by sulfurization of metallic stacks10.1016/j.solmat.2013.01.015 ↗
37. Far infrared studies on stannite and wurtzstannite type compounds10.1016/0584-8539(91)80283-O ↗
38. Cu2Zn1−xCdxSn(Se1−ySy)4 solid solutions as absorber materials for solar cells10.1002/pssa.200776839 ↗
39. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
40. Structural and elemental characterization of high efficiency Cu2ZnSnS4 solar cells10.1063/1.3543621 ↗
41. Comparative study of Cu2ZnSnS4 film growth10.1016/j.solmat.2010.04.060 ↗
42. In-depth resolved Raman scattering analysis for the identification of secondary phases10.1063/1.3587614 ↗
43. Vibrational properties of stannite and kesterite type compounds10.1016/j.jallcom.2012.06.042 ↗
44. The vibrational properties study of kesterite Cu2ZnSnS4 single crystals by using polarization dependent Raman spectroscopy10.1016/j.optmat.2012.09.031 ↗
45. Sublimation study of the tin sulphides SnS2, Sn2S3 and SnS10.1016/0925-8388(91)90053-X ↗
46. Gray · 1982
47. Raman analysis of monoclinic Cu2SnS3 thin films10.1063/1.4712623 ↗
48. Growth and Raman scattering characterization of Cu2ZnSnS4 thin films10.1016/j.tsf.2008.11.031 ↗
49. Raman spectrum of cubic ZnS10.1103/PhysRev.182.838 ↗
50. Effect of annealing temperature on the properties of spray deposited Cu2SnS3 thin films10.1002/pssa.201329157 ↗