Influence on optical properties and switching durability by introducing Ta intermediate layer in Mg–Y switchable mirrors
Source abstract
Abstract
Abstract Magnesium–yttrium alloy switchable mirrors capped with a Pd layer with a thickness of 7.5 nm have been shown to have a high switching durability of over 10,000 cycles between reflective and transparent states. However, the durability decreased considerably when the Pd thickness was decreased to improve the transmittance in the transparent state. Switchable mirrors with a thin Ta intermediate layer inserted between Mg–Y alloy layer and thinner Pd layers were then prepared by a direct-current magnetron sputtering method, and the optical switching durability was studied. Such a mirror capped by a Pd layer with a thickness of 3 nm had a high switching durability of over 10,000 cycles, although a mirror without the Ta intermediate layer capped by a Pd layer with the same thickness never changed from the reflective to the transparent state. Owing to the decrease of the Pd thickness from 7.5 to 3 nm, the visible transmittance in the transparent state increased, respectively, from 32% to 44% with high switching durability. The results of X-ray photoemission spectroscopy and transmission electron microscopy showed that the inserted Ta layer fully inhibits alloying between the Pd and Mg–Y layers, and that the Pd existed at the surface region and scarcely diffused into the Ta and Mg–Y layers even after switching of 10,000 cycles. Because alloying is one of the main reasons for the reduction in durability with decreasing Pd thickness, the prevention of alloying is expected to cause high switching durability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen Storage and Materials · Magnesium Alloys: Properties and Applications · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Yttrium and lanthanum hydride films with switchable optical properties
2. Hydriding kinetics of Pd capped YHx switchable mirrors10.1063/1.371660 ↗
3. Optical switches based on magnesium lanthanide alloy hydrides10.1063/1.119169 ↗
4. Contrast enhancement of rare-earth switchable mirrors through microscopic shutter effect10.1063/1.124912 ↗
5. Insulating fcc YH3−δ stabilized by MgH2
6. Switchable mirrors based on nickel–magnesium films10.1063/1.1371959 ↗
7. Structural, optical, and electrical properties of MgyTi1−yHx thin films10.1103/PhysRevB.75.205408 ↗
8. Optical switching durability of switchable mirrors based on magnesium–yttrium alloy thin films10.1016/j.solmat.2013.06.050 ↗
9. Preparation and characterization of gasochromic switchable-mirror window with practical size10.1016/j.solmat.2009.03.023 ↗
10. Pd distribution of switchable mirrors based on Mg–Y alloy thin films10.1016/j.solmat.2013.10.006 ↗
11. Metal buffer layer inserted switchable mirrors10.1016/j.solmat.2007.02.023 ↗
12. Nowick · 1975 · 231
13. Palik · 1991
14. XPS depth-profile of the suboxide distribution at the native oxide/Ta interface10.1016/j.elspec.2008.10.004 ↗
15. X-ray excited Auger and photoelectron spectra of magnesium, some alloys of magnesium and its oxide10.1088/0305-4608/5/2/020 ↗
16. Oxygen-segregation-controlled epitaxy of Y2O3 films on Nb(110)10.1007/s003390000569 ↗
17. Film thickness change of switchable mirrorsg–Y alloy thin films due to hydrogenation and dehydrogenation10.1016/j.solmat.2013.06.041 ↗
18. Effect of the strong metal–support interaction on hydrogen sorption kinetics of Pd-capped switchable mirrors10.1103/PhysRevB.70.155414 ↗
19. Optical indices of switchable mirrors based on Mg–Y alloy thin films in the transparent state10.1016/j.tsf.2014.02.007 ↗