journal article·2015-01

Morphology and interdiffusion control to improve adhesion and cohesion properties in inverted polymer solar cells

Stephanie R. Dupont, Eszter Voroshazi, Dennis Nordlund, Reinhold H. Dauskardt

Publisher page

Abstract

Abstract The role of pre-electrode deposition annealing on the morphology and the fracture properties of polymer solar cells is discussed. We found an increase in adhesion at the weak P3HT:PCBM/PEDOT:PSS interface with annealing temperature, caused by increased interdiffusion between the organic layers. The formation of micrometer sized PCBM crystallites, which occurs with annealing above the crystallization temperature of PCBM, initially weakened the P3HT:PCBM layer itself. Further annealing improved the cohesion, due to a pull-out toughening mechanism of the growing PCBM clusters. Understanding how the morphology, tuned by annealing, affects the adhesive and cohesive properties in these organic films is essential for the mechanical integrity of OPV devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
2. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
3. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
4. Solar cell efficiency tables (version 39)10.1002/pip.2163 ↗
5. Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells10.1016/j.solmat.2011.10.012 ↗
6. Adhesion properties of inverted polymer solarcells: processing and film structure parameters10.1016/j.orgel.2013.02.022 ↗
7. Cohesion and device reliability in organic bulk heterojunction photovoltaic cells10.1016/j.solmat.2011.11.035 ↗
8. Controlling interdiffusion, interfacial composition and adhesion in polymer solar cells10.1002/admi.201400135 ↗
9. Role of molecular weight on the mechanical device properties of organic polymer solar cells10.1021/ma402215j ↗
10. Molecular intercalation and cohesion of organic bulk heterojunction photovoltaic devices10.1002/adfm.201202969 ↗
11. Effects of thermal annealing upon the morphology of polymer-fullerene blends10.1002/adfm.201000975 ↗
12. Phase diagram of P3HT/PCBM blends and its implication for the stability of morphology10.1021/jp804151a ↗
13. Influence of cathode oxidation via the hole extraction layer in polymer:fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
14. Augmented double cantilever beam model for Studying crack-propagation and arrest10.1007/BF00035958 ↗
15. Stohr · 1992
16. A general-purpose sub-kev X-ray facility at the stanford-synchrotron-radiation-laboratory10.1016/0168-9002(90)90113-K ↗
17. Surface characterization of polythiophene:fullerene blends on different electrodes using near edge X-ray absorption fine structure10.1021/am101055r ↗
18. Characterization of the PEDOT-PSS system by means of X-ray and ultraviolet photoelectron spectroscopy10.1016/S0040-6090(99)00422-8 ↗
19. Methods in determination of morphological degradation of polymer:fullerene solar cells10.1016/j.synthmet.2011.09.014 ↗
20. Effect of spatial confinement on the morphology evolution of thin poly(p-phenylenevinylene)/methanofullerene composite films10.1021/ma047589x ↗
21. A quantitative study of PCBM diffusion during annealing of P3HT: PCBM blend films10.1021/ma901444u ↗
22. Influence of substrate on crystallization in polythiophene/fullerene blends10.1016/j.solmat.2010.12.035 ↗
23. Miscibility, crystallinity, and phase development in P3HT/PCBM solar cells: toward an enlightened understanding of device morphology and Stability10.1021/jz2014902 ↗
24. Remarks on crack-bridging concepts10.1115/1.3119764 ↗