journal article·2012-02

Effect of vertical morphology on the performance of silole-containing low-bandgap inverted polymer solar cells

Jegadesan Subbiah, Chad M. Amb, John R. Reynolds, Franky So

Publisher page

Abstract

Abstract The vertical distribution of blended components in the active layer of a bulk heterojunction solar cell composed of poly[(4,4′-bis(2-ethylhexyl)dithieno[3,2-b:2′,3′-d]silole)-2,6-diyl-alt-(2,1,3-benzothiadiazole)-4,7-diyl] (PDTS-BTD) and [6,6]-phenyl-C71 butyric acid methyl ester (PC 71 BM) was studied using X-ray photoemission spectroscopy (XPS) and Auger electron spectroscopy (AES) depth profile. We found that the vertical profile of the PDTS-BTD:PC 71 BM thin films varies, with a PC 71 BM rich region near the bottom surface and a polymer rich on the top surface. This suggests that the inverted device geometry may be superior to the conventional device geometry for the fabrication of efficient polymer solar cells. Significant enhancement in the power conversion efficiency (PCE) of an inverted polymer solar cell was observed compared to the conventional cell. The enhancement in device performance is attributed to the efficient charge extraction due to the exploitation of vertical morphology of the active layer using the inverted device geometry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
3. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
4. Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole10.1021/ja806687u ↗
5. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
6. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
7. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
8. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
9. Altering the thermodynamics of phase separation in inverted bulk-heterojunction organic solar cells10.1002/adma.200803810 ↗
10. Interface engineering for organic electronics10.1002/adfm.200902236 ↗
11. MoO3/poly(9,9-dioctylfluorene-co-N-[4-(3-methylpropyl)]-diphenylamine) double-interlayer effect on polymer solar cells10.1063/1.3310013 ↗
12. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
13. Inverted polymer solar cells integrated with a low-temperature-annealed sol–gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
14. Vertical phase separation in Poly(3-hexylthiophene): fullerene derivative blends and its advantage for inverted structure solar cells10.1002/adfm.200801286 ↗
15. The effect of three-dimensional morphology on the efficiency of hybrid polymer solar cells10.1038/nmat2533 ↗
16. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
17. Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends10.1038/nmat2102 ↗
18. C.M. Amb, S. Chen, K.R. Graham, J. Subbiah, C.E. Small, F. So, J.R. Reynolds, Dithienogermole as a fused electron donor in bulk heterojunction solar cells, Journal of the American Chemical Society 133 (2011) 10062–10065.10.1021/ja204056m ↗
19. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
20. Solvent annealing effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
21. Origin of the enhanced performance in poly(3-hexylthiophene): [6,6]-phenyl C[sub 61]-butyric acid methyl ester solar cells upon slow drying of the active layer10.1063/1.2212058 ↗
22. Solvent-vapor treatment induced performance enhancement of poly(3-hexylthiophene): methanofullerene bulk-heterojunction photovoltaic cells
23. Solution processed inverted tandem polymer solar cells with self-assembled monolayer modified interfacial layers10.1063/1.3530431 ↗
24. Recent progress in polymer solar cells: manipulation of polymer:fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
25. Highly efficient and stable inverted polymer solar cells integrated with a cross-linked fullerene material as an interlayer10.1021/ja100236b ↗
26. Understanding the performance and loss-mechanisms in donor–acceptor polymer based solar cells: photocurrent generation, charge separation and carrier transport10.1016/j.solmat.2011.04.042 ↗
27. The effect of molybdenum oxide interlayer on organic photovoltaic cells10.1063/1.3220064 ↗