Low temperature deposition of high open-circuit voltage (>1.0V) p–i–n type amorphous silicon solar cells
Source abstract
Abstract
P–i–n type hydrogenated amorphous silicon (a-Si:H) solar cells were deposited by the radio-frequency plasma-enhanced chemical vapor deposition (RF-PECVD) process at a low substrate temperature of 125 °C, which is compatible with low-cost poly (ethylene terephthalate) (PET) plastic substrates. Wide band gap (Eopt>1.88 eV) intrinsic a-Si:H films were achieved before the onset of the microcrystalline regime by changing the hydrogen dilution ratios. On the other hand, the structural, optical and electrical properties of p-type hydrogenated amorphous silicon carbide (p-a-SiC:H) window layers have been optimized at 125 °C. High quality p-a-SiC:H film with high optical band gap (E04=2.02 eV) and high conductivity (σd=1.0×10−7 S/cm) was deposited at ‘low-power regime’ under low silane flow rates and high H2 dilution conditions. With the combination of wide band gap p-a-SiC:H window layers and intrinsic a-Si:H layers, a high Voc of 1.01 V (efficiency=5.51%, FF=0.72, Jsc=7.58 mA/cm2) was obtained for single junction a-Si:H p–i–n solar cell at a low temperature of 125 °C. Finally, flexible a-Si:H solar cell on PET substrate with efficiency of 4.60% (Voc=0.98 V, FF=0.69, Jsc=6.82 mA/cm2) was obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Production technology for amorphous silicon-based flexible solar cells10.1016/S0927-0248(00)00163-X ↗
2. Optimization of amorphous silicon thin film solar cells for flexible photovoltaics10.1063/1.2938839 ↗
3. Roll-to-roll plasma deposition machine for the production of tandem amorphous silicon alloy solar cells10.1016/0040-6090(84)90156-1 ↗
4. Polysilicon thin film transistors fabricated on low temperature plastic substrates10.1116/1.581708 ↗
5. Growth mechanism of hydrogenated amorphous silicon10.1016/S0022-3093(00)00012-0 ↗
6. Fabrication of thin film silicon solar cells on plastic substrate by very high frequency PECVD10.1016/j.solmat.2010.01.013 ↗
7. Flexible protocrystalline silicon solar cells with amorphous buffer layer10.1143/JJAP.45.6812 ↗
8. Device quality silicon carbon thin films10.1557/PROC-609-A23.3 ↗
9. Selective low-power plasma decomposition of silane–methane mixtures for the preparation of methylated amorphous silicon10.1103/PhysRevB.38.9895 ↗
10. The influence of “starving plasma” regime on carbon content and bonds in a-Si1−x:Cx:H thin films10.1063/1.368436 ↗
11. Wide optical band gap window layers for solar cells10.1016/S0927-0248(00)00168-9 ↗
12. The effect of light soaking on the low temperature photoconductivity of hydrogenated amorphous silicon10.1016/0379-6787(83)90078-9 ↗
13. Anomalous substrate and annealing temperature dependencies of heavily boron-doped hydrogenated amorphous silicon10.1063/1.338016 ↗
14. Infrared absorption of hydrogenated amorphous Si–C and Ge–C films10.1016/0040-6090(80)90416-2 ↗
15. X-ray photoelectron spectroscopy and Raman spectroscopy investigations of amorphous SixC1–x(H) coatings obtained by chemical vapour deposition from thermally labile organosilicon compounds10.1016/0040-6090(83)90495-9 ↗
16. Influence of hydrogen-bonding configurations on the physical properties of hydrogenated amorphous silicon10.1103/PhysRevB.50.18046 ↗
17. Structure and physical properties of paracrystalline atomistic models of amorphous silicon10.1063/1.1407319 ↗
18. Doping induced structural change in amorphous silicon (carbon) hydrogen alloy
19. Optimum doping level in a-Si:H and a-SiC:H materials10.1063/1.366764 ↗
20. Detailed investigation of doping in hydrogenated amorphous silicon and germanium10.1103/PhysRevB.35.5666 ↗