Solar cooling with aluminium pillared clays
Source abstract
Abstract
Abstract Aluminium modified clays were prepared, characterised and tested for their potential application as solar coolers of roof surfaces. The water adsorption isotherm of the samples with restored cation exchange capacity was of hydrophilic type II, indicating multilayer adsorption with large heat of adsorption and pore condensation of water vapour at the pressures of the proposed application. In addition, high moisture adsorption capacity (more than 0.1 g of moisture per g of material at 60–70% of relative humidity) and fast kinetics for night sorption (comparable to silica gel) were determined for the freeze-dried pillared sample. In cyclic experiments with low irradiation during the day and night relative humidity of 55%, the maximum temperature inside the pillared montmorillonite was 6.5 °C lower than the corresponding temperature inside a typical soil sample. The primary mechanism for the reduced temperature elevation at aluminium modified clays was evaporative cooling and desorption with minor influence of solar reflection. These results indicate the suitability of aluminium pillared clays for lowering the roof surface temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Urban Heat Island Mitigation · Thermal Radiation and Cooling Technologies · Building Energy and Comfort Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. A review on the generation, determination and mitigation of Urban Heat Island10.1016/S1001-0742(08)60019-4 ↗
2. Water retention properties of porous geopolymers for use in cooling applications10.1016/j.jeurceramsoc.2008.11.006 ↗
3. Landsberg · 1981
4. Determination of places in the great Athens area where the heat island effect is observed10.1007/s007040200006 ↗
5. Simulating the thermal behaviour of a building during summer period in the urban environment10.1016/j.renene.2006.08.003 ↗
6. Estimating the ecological footprint of the heat island effect over Athens, Greece10.1007/s10584-006-9128-0 ↗
7. On the development, optical properties and thermal performance of cool colored coatings for the urban environment10.1016/j.solener.2006.08.005 ↗
8. Changes in year-round air temperature and annual energy consumption in office building areas by urban heat-island countermeasures and energy-saving measures10.1016/j.apenergy.2007.06.012 ↗
9. A. neural network approach for modeling the Heat Island phenomenon in urban areas during the summer period10.1029/1998GL900316 ↗
10. Water-retention properties of porous ceramics prepared from mixtures of allophane and vermiculite for materials to counteract heat island effects10.1016/j.ceramint.2006.10.006 ↗
11. A numerical simulation method for analyzing the thermal improvement effect of super-hydrophilic photocatalyst-coated building surfaces with water film on the urban/built environment10.1016/j.enbuild.2007.08.003 ↗
12. Passive cooling of the built environment—use of innovative reflective materials to fight heat islands and decrease cooling needs10.1093/ijlct/3.2.71 ↗
13. A novel technique for the production of cool colored concrete tile and asphalt shingle roofing products10.1016/j.solmat.2009.12.012 ↗
14. Long-term performance of high-albedo roof coatings10.1016/S0378-7788(96)01005-5 ↗
15. Review of passive solar heating and cooling technologies10.1016/j.rser.2009.10.030 ↗
16. Roof cooling effect with humid porous medium10.1016/j.enbuild.2003.11.004 ↗
17. Actual survey of thermal environment in building for experimental use that employs photocatalyst-based exterior materials10.3130/aije.71.31_5 ↗
18. Ion-exchanged and salt hydrates-encapsulated zeolites for solar refrigeration10.1016/j.solmat.2008.09.057 ↗
19. Experimental study of the performance of porous materials to moderate the roof surface temperature by its evaporative cooling effect10.1016/j.buildenv.2008.03.012 ↗
20. Passive cooling systems for cement-based roofs10.1016/j.buildenv.2008.12.012 ↗
21. Efficiency of aluminum-pillared montmorillonite on the removal of cesium and copper from aqueous solutions10.1016/j.watres.2007.01.053 ↗
22. PIGE and XRF analysis of a nano-composite pillared layered clay material for nuclear waste applications10.1016/S0168-583X(01)00531-6 ↗
23. D. Burch, A. Desjarlais, Water-vapor measurements of low-slope roofing materials, (1995) NISTIR 5681.10.6028/NIST.IR.5681 ↗
24. Swelling–shrinkage measurements of bentonite using coupled environmental scanning electron microscopy and digital image analysis10.1016/j.jcis.2004.09.025 ↗
25. Unusual water vapor adsorption behavior of montmorillonite pillared with ceramic oxides10.1016/0167-2738(89)90241-5 ↗
26. Radium Die Lichtmarke. Personal communication.
27. Solar reflectance and roof surface temperature calculation tool, Heat Island Group, Lawrence Berkeley National Laboratory, 〈http://heatisland.lbl.gov〉 (accessed 1/10/2010).
28. Measuring solar reflectance-Part I: defining a metric that accurately predicts solar heat gain10.1016/j.solener.2010.04.018 ↗