Flexible and conductive nanofiber textiles for leakage-free electro-thermal energy conversion and storage
Source abstract
Abstract
In this contribution, a novel flexible phase change textiles based on decanoic acid (DA) and polyamide 11 (PA11) blends with various DA/PA11 mass ratios, in which PA11 acted as the polymer matrix, and DA behaved as phase change ingredient, were developed via electrospinning. Besides, a conductive polypyrrole (PPy) coating was designed via in-situ polymerization. Morphological observations carried out by the SEM images demonstrated porous and highly homogeneous morphology with smooth, long, continuous, and free-bead fibers. Furthermore, forming of a uniform PPy layer on the surface was confirmed through the images. As such, conductive textiles with electrical conductivity up to 28.89 ± 1.50 S/m were prepared. Tensile testing showed that the mechanical properties did not change considerably after PPy coating. Moreover, the phase change performance was investigated using DSC analysis, where the melting and crystallization enthalpies were respectively 112.77 J/g and 110.21 J/g in the textile with the highest DA loading, i.e., 70 wt%. More notably, the phase-change enthalpies did not change considerably after 100 DSC thermal cycles. Finally, significant electro- and photo-heat storage and conversion were observed for the conductive PCM textiles. Thus, this work introduced new flexible smart textiles with significant potential in wearable and protective systems.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Phase Change Materials Research · Advanced Sensor and Energy Harvesting Materials · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Properties and encapsulation forms of phase change material and various types of cold storage box for cold chain logistics: a review10.1016/j.est.2022.105426 ↗
2. Efficient storage and recovery of waste heat by phase change material embedded within additively manufactured grid heat exchangers10.1016/j.ijheatmasstransfer.2021.121846 ↗
3. Simultaneous effect of biochar-additive and lightweight heat exchanger on phase change material for low-grade thermal energy storage10.1016/j.est.2022.105478 ↗
4. Directional fiber framework wrapped by graphene flakes for supporting phase change material with fast thermal energy storage properties10.1016/j.est.2022.106304 ↗
5. Water-resistant gum-based phase change composite for thermo-regulating insulation packaging10.1016/j.est.2023.106725 ↗
6. Exceptional cold-crystallization kinetics of erythritol-polyelectrolyte enables long-term thermal energy storage10.1016/j.solmat.2021.111273 ↗
7. Electrospun poly (vinyl alcohol)/phase change material fibers: morphology, heat properties, and stability10.1021/acs.iecr.5b01822 ↗
8. A shape-stable phase change composite prepared from cellulose nanofiber/polypyrrole/polyethylene glycol for electric-thermal energy conversion and storage10.1016/j.cej.2020.125950 ↗
9. Flexible, stimuli-responsive and self-cleaning phase change fiber for thermal energy storage and smart textiles10.1016/j.compositesb.2021.109431 ↗
10. Ionic mixture of binary sugar alcohols and a polymer: composition optimization for long-term thermal energy storage10.1021/acssuschemeng.2c04764 ↗
11. Electrospinning fabricated novel poly (ethylene glycol)/graphene oxide composite phase-change nano-fibers with good shape stability for thermal regulation10.1016/j.est.2021.102687 ↗
12. Form-stable phase change electrospun nanofibers mat with thermal regulation and biomedical multi-functionalities10.1016/j.est.2023.107660 ↗
13. Flexible core-sheath thermochromic phase change fibers for temperature management and electrical/solar energy harvesting10.1016/j.compscitech.2022.109538 ↗
14. Room-temperature, energy storage textile with multicore-sheath structure obtained via in-situ coaxial electrospinning10.1016/j.cej.2022.135226 ↗
15. Flexible and degradable polycaprolactone based phase change composites for thermal energy management10.1016/j.reactfunctpolym.2022.105451 ↗
16. Novel smart textile with ultraviolet shielding and thermo-regulation fabricated via electrospinning10.1016/j.est.2021.103094 ↗
17. Achieving multifunctional smart textile with long afterglow and thermo-regulation via coaxial electrospinning10.1016/j.jallcom.2019.152144 ↗
18. Electrospun ultrafine composite fibers consisting of lauric acid and polyamide 6 as form-stable phase change materials for storage and retrieval of solar thermal energy10.1016/j.solmat.2012.04.031 ↗
19. Ultrafine electrospun fiber based on ionic liquid/AlN/copolyamide composite as novel form-stable phase change material for thermal energy storage10.1016/j.solmat.2020.110953 ↗
20. Fabrication and characterization of polyamide6-room temperature ionic liquid (PA6-RTIL) composite nanofibers by electrospinning10.1007/s12221-013-1614-1 ↗
21. The improvement of thermal stability and conductivity via incorporation of carbon nanofibers into electrospun ultrafine composite fibers of lauric acid/polyamide 6 phase change materials for thermal energy storage10.1080/15435075.2013.829068 ↗
22. Morphology, compatibility, physical and thermo-regulated properties of the electrospinning polyamide 6 and polyethylene glycol blended nanofibers10.1177/1528083714562089 ↗
23. Fabrication of electrospun nanofibre yarn based on nylon 6/microencapsulated phase change materials10.1080/17458080.2016.1233582 ↗
24. Sustainable composites of surface-modified cellulose with low–melting point polyamide
25. High-concentration lignin biocomposites with low-melting point biopolyamide10.1016/j.cej.2022.138564 ↗
26. Design, fabrication, and characterization of novel porous conductive scaffolds for nerve tissue engineering10.1080/00914037.2015.1038817 ↗
27. Kinetics and characterization of preparing conductive nanofibrous membrane by In-situ polymerization of Polypyrrole on electrospun nanofibers
28. Deposition of ZIF-67 and polypyrrole on current collector knitted from carbon nanotube-wrapped polymer yarns as a high-performance electrode for flexible supercapacitors10.1016/j.jcis.2022.10.155 ↗
29. A universal construction of robust interface between 2D conductive polymer and cellulose for textile supercapacitor10.1016/j.carbpol.2022.119230 ↗
30. An efficient and simple strategy for fabricating a polypyrrole decorated ceramic-polymeric porous membrane for purification of a variety of oily wastewater streams10.1016/j.envres.2022.114959 ↗
31. High‐performance and biobased polyamide/functionalized graphene oxide nanocomposites through in situ polymerization for engineering applications10.1002/mame.202100255 ↗
32. Novel long-chain aliphatic polyamide/surface-modified silicon dioxide nanocomposites: in-situ polymerization and properties
33. Development and investigation of form-stable and cyclable decanoic acid-based composite phase change materials for efficient battery thermal management10.1016/j.jpowsour.2022.232615 ↗
34. Investigation on corrosion inhibition performance of polypyrrole coating on Q235 steel in civil structure10.1016/j.aej.2023.03.014 ↗
35. Microencapsulation of a fatty acid with Poly (melamine–urea–formaldehyde)10.1016/j.enconman.2014.01.042 ↗
36. Surface selective polymerization of polypyrrole on ordered mesoporous carbon: enhancing interfacial conductivity for direct methanol fuel cell application10.1021/ma052363v ↗
37. Rapid separation of High-viscosity phosphorous Acid/Tributyl phosphate extraction system by a stable anticorrosive Super-PA-phobic mesh10.1016/j.seppur.2022.121199 ↗
38. Using co-electrospinning method to regulate phase change temperatures of fatty acid eutectic/polystyrene/fatty acid eutectic form-stable phase change composite nanofibrous membranes for thermal energy storage10.1016/j.tca.2019.178438 ↗
39. Ultrafine lauric–myristic acid eutectic/poly (meta-phenylene isophthalamide) form-stable phase change fibers for thermal energy storage by electrospinning10.1016/j.apenergy.2016.04.061 ↗
40. Direct electrospinning of fluorine-free waterproof polyamide/polydimethylsiloxane nanofibrous membranes with highly breathable performance10.1016/j.coco.2022.101337 ↗
41. Bio-based polyamide fibers prepared by mussel biomimetic modification of hydroxyapatite10.1016/j.eurpolymj.2023.111913 ↗
42. Preparation of polyamide-6/chitosan composite nanofibers by a single solvent system via electrospinning for biomedical applications10.1016/j.colsurfb.2010.11.026 ↗
43. Effect of conductive polymers on the optical properties of electrospun polyacrylonitryle nanofibers filled by polypyrrole, polythiophene and polyaniline10.1016/j.apsusc.2019.145068 ↗
44. In-situ polymerized polypyrrole nanoparticles immobilized poly (ε-caprolactone) electrospun conductive scaffolds for bone tissue engineering10.1016/j.msec.2020.111056 ↗
45. Chemical in situ polymerization of polypyrrole on bacterial cellulose nanofibers10.1016/j.synthmet.2010.11.005 ↗
46. Conductive polypyrrole nanofibers via electrospinning: electrical and morphological properties10.1016/j.polymer.2006.01.032 ↗
47. Fabrication and characterization of conductive polypyrrole/chitosan/collagen electrospun nanofiber scaffold for tissue engineering application10.1016/j.ijbiomac.2020.12.031 ↗
48. Polypyrrole-coated electrospun poly (lactic acid) fibrous scaffold: effects of coating on electrical conductivity and neural cell growth10.1080/09205063.2014.926578 ↗
49. Conducting electrospun polycaprolactone/polypyrrole fibers10.1016/j.synthmet.2017.11.011 ↗
50. Polypyrrole-coated conjugated microporous polymers/expanded graphene carbon aerogels based phase change materials composites for efficient energy conversion and storage10.1016/j.solmat.2022.111873 ↗
51. Large-scale fabrication of graphene/polyamide-6 composite as a high thermal conductivity engineering composite for thermal radiators10.1016/j.matlet.2022.132036 ↗
52. Structure and thermal properties of decanoic acid/expanded graphite composite phase change materials10.1007/s10973-016-6068-4 ↗
53. Polypyrrole coated carbon nanotube aerogel composite phase change materials with enhanced thermal conductivity, high solar-/electro-thermal energy conversion and storage10.1016/j.jcis.2022.09.103 ↗
54. Effects of porous silicon carbide supports prepared from pyrolyzed precursors on the thermal conductivity and energy storage properties of paraffin-based composite phase change materials10.1016/j.est.2022.106046 ↗
55. Effect of hydrogen–deuterium exchange in amide linkages on properties of electrospun polyamide nanofibers10.1016/j.polymer.2021.123994 ↗
56. On the efficiency of oleic acid as plasticizer of chitosan/clay nanocomposites and its role on thermo-mechanical, barrier and antimicrobial properties–Comparison with glycerol10.1016/j.foodhyd.2016.01.003 ↗
57. Electrospinning, preparation and photoluminescence properties of CoNb2O6: Dy3+ incorporated polyamide 6 composite fibers10.1016/j.apsusc.2016.11.134 ↗
58. Effect of molecular weight and content of polyvinylpyrrolidone on cell proliferation, loading capacity and properties of electrospun green tea essential oil-incorporated polyamide-6/polyvinylpyrrolidone nanofibers10.1016/j.jddst.2023.104310 ↗
59. Multi-jet electrospinning of polystyrene/polyamide 6 blend: thermal and mechanical properties10.1186/s40691-017-0090-4 ↗
60. Enhancement in photothermal conversion property of polypyrrole-decorated polyurethane/zirconium carbide fibrous membrane
61. Preparation of oil-in-water core-sheath nanofibers through emulsion electrospinning for phase change temperature regulation10.1016/j.polymer.2022.125252 ↗
62. Preparation and characterization of structurally variable inorganic nanofibrous mats with large surface area for intelligent temperature regulation textiles10.1016/j.colsurfa.2022.130633 ↗
63. Thermal insulation capability of PEG-containing polyurethane foams10.1016/j.tca.2008.06.006 ↗
64. Scalable preparation of MWCNTs/PAN conductive composite fibers with Tai Chi structure for thermotherapy textiles10.1016/j.compscitech.2022.109866 ↗
65. Durable antibacterial and temperature regulated core-spun yarns for textile health and comfort applications10.1016/j.cej.2022.140917 ↗