Methodology for local ageing and damage development characterization of solar glass/encapsulant interfaces under superimposed fatigue stresses and environmental influences
Source abstract
Abstract
In this paper, a novel fracture mechanics test-setup was developed, implemented and applied for assessment of the fatigue delamination behavior of glass/encapsulant laminates under superimposed mechanical stresses and environmental influences. Double cantilever beam (DCB) specimens with glass substrates were prepared using ethylene vinyl-acetate copolymer (EVA) or polyolefin elastomer (POE) encapsulants. Displacement-controlled fatigue tests were conducted at 80 °C under dry (5% rh) and humid (80% rh) conditions. The damage zone ahead of the delamination crack tip was monitored with a topside mounted camera system. A superior delamination resistance of POE based double glass laminates was ascertained. Under less service-relevant, hot-dry conditions, the glass laminates exhibited a mm-sized damage process zone ahead of the crack tip, in which void nucleation and fibril formation took place. While the POE laminate failed also in a cohesive manner within the encapsulant at 80 °C and 80% rh (i.e., hot-humid), the crack was propagating in the glass/EVA laminate close to the interface in a brittle manner. Local ageing mechanisms were confirmed for the fractured EVA laminates by XPS. The superposition of mechanical and thermal stresses along with humidity resulted in sodium ion migration presumably promoting deacetylation of EVA. Interestingly, the analyzed degradation products were in good agreement with data obtained for damp heat aged glass/foil PV modules characterized subsequently by monotonic delamination testing. The main advantage of the novel environmental fracture mechanics methodology is the high acceleration factor (50 to 100x faster) compared to conventional ageing and delamination testing of PV modules.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Analysis of Composite Materials · Structural Analysis and Optimization · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. 2014
2. Overview of PV module encapsulation materials
3. Newly developed thermoplastic polyolefin encapsulant–A potential candidate for crystalline silicon photovoltaic modules encapsulation10.1016/j.solener.2019.11.018 ↗
4. Ethylene-vinyl acetate (EVA) encapsulants for photovoltaic modules: degradation and discoloration mechanisms and formulation modifications for improved photostability10.1002/apmc.1997.052520114 ↗
5. Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: a critical review10.1016/0927-0248(95)00150-6 ↗
6. Long-term EVA degradation simulation: climatic zones comparison and possible revision of accelerated tests10.1016/j.solener.2017.10.081 ↗
7. Validation of the PVLife model using 3 million module-years of live site data
8. Compressive-shear adhesion characterization of polyvinyl-butyral and ethylene-vinyl acetate at different curing times before and after exposure to damp-heat conditions10.1002/pip.2270 ↗
9. Peeling of flexible laminates—determination of interlayer adhesion of backsheet laminates used for photovoltaic modules10.3390/ma15093294 ↗
10. Development and first results of the width-tapered beam method for adhesion testing of photovoltaic material systems10.1109/PVSC.2016.7749558 ↗
11. Damp heat resilient thermoplastic polyolefin encapsulant for photovoltaic module encapsulation10.1016/j.solmat.2021.111024 ↗
12. Dependence of adhesion on degradation mechanisms of ethylene co-vinyl acetate encapsulants over the lifetime of photovoltaic modules10.1016/j.solmat.2022.111818 ↗
13. Yielding and crack growth testing of polymers under severe liquid media conditions10.1016/j.polymertesting.2014.09.005 ↗
14. Effect of liquid oilfield-related media on slow crack growth behavior in polyethylene pipe grade materials10.1016/j.ijfatigue.2014.09.016 ↗
15. 2011
16. Influence of water vapor on crack propagation in soda-lime glass10.1111/j.1151-2916.1967.tb15145.x ↗
17. Micromechanisms of crack growth in ceramics and glasses in corrosive environments10.1179/msc.1980.14.8-9.450 ↗
18. The role of the interphase in the environmental failure of adhesive joints10.1016/S1359-6454(00)00240-8 ↗
19. Temperature dependent fatigue crack growth in electrical steel laminates with μm-thick epoxy layers10.1016/j.engfracmech.2022.108416 ↗
20. Development and implementation of a simultaneous fatigue crack growth test setup for polymeric hybrid laminates10.1016/j.engfracmech.2022.108468 ↗
21. Moisture-assisted subcritical debonding of a polymer/metal interface10.1063/1.1427139 ↗
22. The effects of test temperature and humidity on the mixed-mode fatigue behavior of a toughened adhesive aluminum joint10.1016/j.engfracmech.2011.01.028 ↗
23. Moisture-assisted crack growth in polymer adhesive-glass sandwich geometries10.1557/PROC-338-599 ↗
24. Crack propagation in polymer adhesive/glass sandwich specimens10.1080/00218469508009980 ↗
25. Fatigue and durability of silane-bonded epoxy/glass interfaces10.1080/00218460108030725 ↗
26. Adhesion and debonding kinetics of photovoltaic encapsulation in moist environments10.1002/pip.2657 ↗
27. Subcritical debonding of polymer/silica interfaces under monotonic and cyclic loading10.1016/S1359-6454(02)00072-1 ↗
28. Comparison of crosslinking kinetics of UV-transparent ethylene-vinyl acetate copolymer and polyolefin elastomer encapsulants10.3390/polym14071441 ↗
29. Pugstaller · 2021
30. An evaluation of data reduction methods for opening mode fracture toughness of sandwich panels10.1177/1099636205047085 ↗
31. Fatigue threshold behavior of adhesive joints10.1016/j.ijadhadh.2009.12.004 ↗
32. Development of a method for vapour phase trimethylsilylation of surface hydroxyl groups
33. Investigation of ethylene/vinyl acetate copolymer (EVA) by thermal analysis DSC and DMA10.1016/j.polymertesting.2010.12.003 ↗
34. Thermomechanical deformations in photovoltaic laminates10.1177/0309324711421722 ↗
35. Ulrich · 2021
36. Fracture and adhesion of elastomers and gels: large strains at small length scales10.1002/polb.21005 ↗
37. Detachment of stretched viscoelastic fibrils10.1140/epje/i2007-10287-y ↗
38. Deformation behavior of thin, compliant layers under tensile loading conditions10.1002/polb.20258 ↗
39. Crack blunting and the strength of soft elastic solids10.1098/rspa.2002.1057 ↗
40. Fracture mechanics and cavitation in rubber-like solids10.1007/BF01124691 ↗
41. Fine tuning the adhesive properties of a soft nanostructured adhesive with rheological measurements10.1080/00218460902727381 ↗
42. Quantitative analysis of the debonding structure of soft adhesives10.1140/epje/i2014-14003-8 ↗
43. Bulk and interfacial contributions to the debonding mechanisms of soft adhesives: extension to large strains10.1021/la010117g ↗
44. Fracture and adhesion of soft materials: a review10.1088/0034-4885/79/4/046601 ↗
45. Micromechanisms of tack of soft adhesives based on styrenic block copolymers10.1002/1439-2054(20020301)287:3<163::AID-MAME163>3.0.CO;2-P ↗
46. Adhesive failure analysis of pressure-sensitive adhesives10.1002/(SICI)1099-0488(19991215)37:24<3455::AID-POLB7>3.0.CO;2-3 ↗
47. Cavity growth in soft adhesives10.1140/epje/i2004-10148-3 ↗
48. Optical properties of highly transparent polypropylene cast films: influence of material structure, additives, and processing conditions10.1002/pen.20503 ↗
49. Highly transparent polypropylene cast films: relationships between optical properties, additives, and surface structure10.1002/pen.20781 ↗
50. Effect of material structure and additives on the optical properties of PP cast films10.1007/s00706-006-0480-6 ↗
51. Structural changes during plastic deformation at crack tips in PVDF films: a scanning X-ray scattering study10.1021/ma050390f ↗
52. The leaching of sodium containing glasses ion exchange or diffusion of molecular water?
53. Shelby · 2005
54. Influence of acid leaching surface treatment on indentation cracking of soda lime silicate glass10.1016/j.jnoncrysol.2020.120144 ↗
55. Diffusion of water in silica: influence of moderate stresses10.1111/jace.15195 ↗
56. Bosco · 2016 · 1536
57. Encapsulant adhesion to surface metallization on photovoltaic cells10.1109/JPHOTOV.2017.2746572 ↗