24.4% industrial tunnel oxide passivated contact solar cells with ozone-gas oxidation Nano SiOx and tube PECVD prepared in-situ doped polysilicon
Source abstract
Abstract
Ozone-gas oxidation (OGO) technology, capable of integrating into tube plasma-enhanced chemical vapor deposition (PECVD) technology, is developed to prepare the Nano SiO x layer for tunnel oxide passivated contact (TOPCon) solar cells in this work. The effects of gas flow, oxidation temperature, and annealing temperature on passivation quality are investigated. The X-ray photoelectron spectroscopy (XPS) indicates that OGO SiO x possesses a Si 4+ proportion of about 20%, higher than the nitric acid oxidized (NAOS) SiO x and plasma-assisted N 2O oxidation (PANO) SiO x. The implied open-circuit voltage ( iV oc ) of the hydrogenated lifetime sample is promoted to more than 740 mV with the highest value of 748 mV, corresponding to a lowest single-sided saturation current density ( J 0,s) of 3.1 fA/cm 2. The contact resistivity extracted from the Cox-Strack method is < 9 mΩ cm 2 as the annealing temperature is more than 840 °C. Finally, we prepared the large-sized TOPCon solar cells with an average efficiency of 24.37% and a maximum efficiency of 24.41%, respectively. The above work shows that the tube PECVD technology integrated with ozone gas oxidation has the potential for the mass-production TOPCon industry.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
2. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
3. 26%-efficient and 2 cm narrow interdigitated back contact silicon solar cells with passivated slits on two edges10.1016/j.solmat.2019.110021 ↗
4. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
5. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
6. Tong · 2021
7. Mass production of industrial tunnel oxide passivated contacts (i‐TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W10.1002/pip.3180 ↗
8. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
9. TOPCon – technology options for cost efficient industrial manufacturing10.1016/j.solmat.2021.111100 ↗
10. Steinhauser · 2018 · 1800068
11. Large area TOPCon cells realized by a PECVD process
12. Silicon oxidation by ozone10.1088/0953-8984/21/18/183001 ↗
13. Simple cleaning and conditioning of silicon surfaces with UV/ozone sources10.1016/j.egypro.2014.08.067 ↗
14. Tunnel oxide passivated carrier-selective contacts based on ultra-thin SiO2 layers10.1016/j.solmat.2015.06.048 ↗
15. Ultrathin silicon oxide prepared by in-line plasma-assisted N2O oxidation (PANO) and the application for n-type polysilicon passivated contact10.1016/j.solmat.2019.110389 ↗
16. D. Ma, W. Liu, M. Xiao, Z. Yang, Z. Liu, M. Q, H. Cheng, H. Xing, Z. Ding, B, Y. Wang, Y. Zeng, J. Ye, Highly Improved Passivation of PECVD P-type TOPCon by Suppressing Plasma-Oxidation Ion-Bombardment-Induced Damages, Sol. Energy, (submitted for publication).
17. Charge-carrier dynamics for silicon oxide tunneling junctions mediated by local pinholes10.1016/j.xcrp.2021.100667 ↗
18. In-situ phosphorus-doped polysilicon prepared using rapid-thermal-process (RTP) annealing and its application for polysilicon passivated-contact solar cells10.1016/j.solmat.2020.110518 ↗
19. An industrially viable TOPCon structure with both ultra-thin SiOx and n+-poly-Si processed by PECVD for p-type c-Si solar cells10.1016/j.solmat.2019.109926 ↗
20. Comparison of different types of interfacial oxides on hole-selective p+-poly-Si passivated contacts for high-efficiency c-Si solar cells10.1016/j.solmat.2020.110487 ↗
21. A strong-oxidizing mixed acid derived high-quality silicon oxide tunneling layer for polysilicon passivated contact silicon solar cell10.1016/j.solmat.2018.09.001 ↗
22. Contact selectivity and efficiency in crystalline silicon photovoltaics10.1109/JPHOTOV.2016.2598267 ↗
23. High temperature shock tube studies on the thermal decomposition of O3 and the reaction of dimethyl carbonate with O-atoms10.1021/jp400613p ↗
24. Temperature dependence of ozone loss rate10.1541/ieejfms.133.465 ↗
25. Mechanism of the gas phase, thermal decomposition of ozone10.1063/1.1743610 ↗
26. Silicon oxidation by ozone10.1088/0953-8984/21/18/183001 ↗
27. Numerical and experimental exploration for 26% rear-junction n-type silicon solar cells with front localized and rear full-area polysilicon passivated contact10.1016/j.solener.2021.04.020 ↗