journal article·2019-09

Interconnect-shingling: Maximizing the active module area with conventional module processes

Henning Schulte-Huxel, Susanne Blankemeyer, Arnaud Morlier, Rolf Brendel, Marc Köntges

Publisher page

Abstract

Abstract We present a module fabrication process enabling gap-free interconnection of c-Si solar cells using solder-based interconnection technology with ribbons or wires. The interconnect-shingling process increases the module efficiency by avoiding the gaps between the solar cells. The process is applicable to bifacial cells and uses well-proven interconnection technologies. In contrast to previous adhesive-based shingled modules, the current transport is supported by interconnects, thus reducing the silver consumption for the cells’ metallization and avoiding cell overlap. We lay down the cells on structured encapsulant layers to reduce mechanical stress at the cell edges during lamination. Alternatively, the lamination process can be adapted to allow the encapsulant to reflow. This also results in a low pressure at sensitive cell parts. Both approaches avoid crack formation. We demonstrate the interconnect-shingling process with a proof-of-concept module having a aperture area efficiency of 22.1%. Applying 200 thermal cycles does not cause any crack formation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Technology advances needed for photovoltaics to achieve widespread grid price parity10.1002/pip.2755 ↗
2. High efficiency modules with passivated emitter and rear solar cells – an analysis of electrical and optical losses
3. Combining ray tracing with device modeling to evaluate experiments for an optical analysis of crystalline Si solar cells and modules10.1016/j.egypro.2017.09.269 ↗
4. Combined effect of light harvesting strings, anti-reflective coating, thin glass, and high ultraviolet transmission encapsulant to reduce optical losses in solar modules10.1002/pip.2470 ↗
5. Optimized interconnection of passivated emitter and rear cells by experimentally verified modeling10.1109/JPHOTOV.2016.2514706 ↗
6. 335-W world-record p-type monocrystalline module with 20.6% efficient PERC solar cells10.1109/JPHOTOV.2015.2498039 ↗
7. D.C. Dicksen US2938938.
8. 22.3% efficient silicon solar cell module
9. 2014
10. 2015
11. 2018
12. Cell-to-Module (CTM) analysis for photovoltaic modules with shingled solar cells
13. 21.2%-efficient fineline-printed PERC solar cell with 5 busbar front grid10.1002/pssr.201409190 ↗
14. Mechanical Damage of Half-Cell Cutting Technologies in Solar Cells and Module Laminates
15. Resistive power loss analysis of {PV} modules made from halved 15.6 × 15.6 cm2 silicon {PERC} solar cells with efficiencies up to 20.0%10.1109/JPHOTOV.2014.2367868 ↗
16. Stress analysis of encapsulated solar cells by means of superposition of thermal and mechanical stresses
17. Microstructural optimization approach of solar cell interconnectors fatigue behavior for enhanced module lifetime in extreme climates10.1016/j.egypro.2016.07.020 ↗
18. Characterization of {PV} modules by combining results of mechanical and electrical analysis methods
19. Sander · 2011 · 811209
20. Numerical simulation of the evolution of stress in solar cells during the entire manufacturing cycle of a conventional silicon wafer based photovoltaic laminate10.1109/JPHOTOV.2017.2775158 ↗
21. Present status and future perspectives of bifacial PERC+ solar cells and modules10.7567/JJAP.57.08RA01 ↗
22. Schneider · 2006
23. Smart wire connection technology
24. Wirth · 2017
25. Modelling the curing dynamics of ethylene-vinyl acetate
26. >24% Silicon Heterojunction Solar Cells on Meyer Burger’s on Mass Production Tools and How Wafer Material Impacts Cell Parameters