journal article·2018-10Open access

Effects of environmental and operational variability on the spectrally selective properties of W/WAlN/WAlON/Al2O3-based solar absorber coating

A. Dan, B. Basu, T. Echániz, I. González de Arrieta, G.A. López, H.C. Barshilia

Abstract

The stability of solar selective absorber coatings in hostile environments (e.g., humid condition, corrosive medium, longer exposure at elevated temperature) needs to be critically assessed to ensure durability of such coatings. In the present work, magnetron sputtered W/WAlN/WAlON/Al2O3-based absorber coating with a high absorptance (0.958) and low emittance (82 degrees C) has been tested in humid and corrosive environments. The selectivity (absorptance/emittance) of the coating did not change after keeping it in 95% humidity at 37 degrees C for 400 h. Corrosion study in 3.5% NaCl solution reveals that this novel multilayer coating has a better corrosion resistance than that of uncoated stainless steel (SS) substrate. The nanoindentation test on the coating indicates that it has a hardness of 9.6 +/- 0.5 GPa. The performance of the coating did not degrade after heat treatment at 350 degrees C in air for 1000 h. Additionally, the activation energy for degradation has been determined to predict the stability of the coating at high temperature. Further, the normal spectral emissivity of the tandem solar absorber was measured in the full angular range from 200 to 500 degrees C. The results of emissivity measurements by varying observation angles are analysed using numerical integration to obtain the total hemispherical emissivity. In summary, W/WAlN/WAlON/Al2O3 stack is an attractive candidate absorber coating for photo-thermal conversion systems.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Solar-Powered Water Purification Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Solar energy absorption mediated by surface plasma polaritons in spectrally selective dielectric-metal-dielectric coatings: a critical review10.1016/j.rser.2017.05.062 ↗
2. Growth, characterization and performance evaluation of Ti/AlTiN/AlTiON/AlTiO high temperature spectrally selective coatings for solar thermal power applications10.1016/j.solmat.2014.07.037 ↗
3. Characterization of TiAlSiN/TiAlSiON/SiO2 optical stack designed by modelling calculations for solar selective applications10.1016/j.solmat.2012.06.011 ↗
4. Microstructure and thermal stability of Al/Ti0.5Al0.5N/Ti0.25Al0.75N/AlN solar selective coating10.1016/j.solmat.2012.12.010 ↗
5. Resistant RuO2/SiO2 absorbing sol–gel coatings for solar energy conversion at high temperature10.1021/acs.chemmater.5b00731 ↗
6. Design and fabrication of highly thermally stable HfMoN/HfON/Al2O3 tandem absorber for solar thermal power generation applications10.1016/j.solmat.2012.03.021 ↗
7. Optical simulation, corrosion behavior and long term thermal stability of TiC-based spectrally selective solar absorbers10.1016/j.solmat.2017.04.015 ↗
8. Optical and mechanical characterization of novel cobalt-based metal oxide thin films synthesized using sol–gel dip-coating method10.1016/j.surfcoat.2012.07.028 ↗
9. S. Sklarew, Emittance studies of various high temperature materials and coatings, in: MARQUARDT CO VAN NUYS CA, 1963.
10. Optical characterization of TiAlNx/TiAlNy/Al2O3 tandem solar selective absorber coatings10.1016/j.solmat.2017.06.007 ↗
11. First spectral emissivity study of a solar selective coating in the 150–600 °C temperature range10.1016/j.solmat.2013.07.002 ↗
12. Importance of the spectral emissivity measurements at working temperature to determine the efficiency of a solar selective coating10.1016/j.solmat.2015.04.009 ↗
13. Measurement of high temperature emissivity and photothermal conversion efficiency of TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO spectrally selective coating10.1016/j.solmat.2017.06.057 ↗
14. Spectrally selective absorber coating of WAlN/WAlON/Al2O3 for solar thermal applications10.1016/j.solmat.2016.07.018 ↗
15. Thermal stability of WAlN/WAlON/Al2O3-based solar selective absorber coating10.1557/adv.2016.388 ↗
16. Angular solar absorptance and thermal stability of W/WAlN/WAlON/Al2O3-based solar selective absorber coating10.1016/j.applthermaleng.2016.04.069 ↗
17. Colored selective absorber coating with excellent durability10.1016/j.tsf.2016.08.070 ↗
18. Electrochemical behavior of single layer CrN, TiN, TiAlN coatings and nanolayered TiAlN/CrN multilayer coatings prepared by reactive direct current magnetron sputtering10.1016/j.tsf.2006.03.008 ↗
19. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
20. Experimental investigation of emissivity of aluminum alloys and temperature determination using multispectral radiation thermometry (MRT) algorithms10.1361/105994902770343818 ↗
21. An XPS evidence of Pt4+ present on sulfated Pt/Al2O3 and its effect on propane combustion10.1016/S1566-7367(03)00085-2 ↗
22. Study of the Ti/Al2O3 interface10.1007/BF00354393 ↗
23. Surface spectroscopic study of tungsten-alumina catalysts using X-ray photoelectron, ion scattering, and Raman spectroscopies10.1021/j150624a035 ↗
24. Gas phase ESCA studies of 2,5-diaza-1,6-dioxa-6a-thiapentalene and its selenium and tellurium analogs10.1021/ja00526a004 ↗
25. An XPS study of the UV reduction and photochromism of MoO3 and WO310.1063/1.443047 ↗
26. Experimental study of scattering from characterized random surfaces10.1364/JOSAA.4.001194 ↗
27. Infrared absorption at longitudinal optic frequency in cubic crystal films10.1103/PhysRev.130.2193 ↗
28. An infrared spectroscopic investigation of thin alumina films: measurement of acid sites and surface reactivity10.1016/S0039-6028(99)00376-3 ↗
29. Influence of surface roughness on water-and oil-repellent surfaces coated with nanoparticles10.1016/j.apsusc.2004.07.016 ↗
30. Structural, optical and hydrophobic properties of sputter deposited zirconium oxynitride films10.1016/j.mseb.2010.05.027 ↗
31. Role of hydroxyls in oxide wettability10.1021/la903029c ↗
32. Structure of alumina surfaces10.1039/ft9969204843 ↗
33. Self‐assembly of stearic acid on aluminium: the importance of oxide surface chemistry10.1002/sia.1919 ↗
34. Research on the corrosion behavior of TiN-TiAlN multilayer coatings deposited by cathodic-arc ion plating10.5006/1.3287705 ↗
35. Comparison of structural, mechanical and corrosion properties of (Ti0.68W0.32)Ox and (Ti0.41W0.59)Ox thin films, deposited on TiAlV surface by electron beam evaporation10.1016/j.surfcoat.2016.09.047 ↗
36. Corrosion behavior of type 304 stainless steel in a simulated seawater-based medium in the presence and absence of aerobic Pseudomonas NCIMB 2021 bacteria10.1021/ie071536x ↗
37. Microscopic models of hardness10.3103/S1063457610030020 ↗
38. Superhard nanocomposite coatings of TiN/Si3N4 prepared by reactive direct current unbalanced magnetron sputtering10.1016/j.surfcoat.2005.11.124 ↗
39. The VDI 3198 indentation test evaluation of a reliable qualitative control for layered compounds10.1016/S0924-0136(03)00300-5 ↗
40. Spectral emissivity of silicon10.1143/JJAP.6.339 ↗
41. Efficiency and behavior of textured high emissivity metallic coatings at high temperature10.1016/j.matdes.2015.05.073 ↗
42. Angular variation of land surface spectral emissivity in the thermal infrared: laboratory investigations on bare soils10.1080/01431169108955259 ↗
43. Thermal infrared directional emissivity of powdered quartz10.1029/95JB02400 ↗
44. On the effect of emergence angle on emissivity spectra: application to small bodies10.1186/s40623-016-0464-7 ↗
45. On the angular variation of thermal infrared emissivity of inorganic soils
46. A spectroscopic method to measure the spectral emissivity of semi-transparent materials up to high temperature10.1063/1.1150028 ↗
47. High temperature thermal stability of plasma-deposited tungsten nitride Schottky contacts to GaAs10.1016/0038-1101(94)00148-9 ↗
48. Thermal stability of nitride thin films10.1016/S0042-207X(00)00143-3 ↗
49. Optical characterization of TiAlN/TiAlON/SiO2 absorber for solar selective applications10.1016/j.surfcoat.2011.09.003 ↗
50. Critical tuning of magnetron sputtering process parameters for optimized solar selective absorption of NiCrOx cermet coatings on aluminium substrate10.1016/j.apsusc.2013.01.136 ↗
51. Spectrally selective NbAlN/NbAlON/Si3N4 tandem absorber for high-temperature solar applications10.1016/j.solmat.2007.11.004 ↗
52. Functional multi-layer solar spectral selective absorbing coatings of AlCrSiN/AlCrSiON/AlCrO for high temperature applications10.1016/j.solmat.2016.04.007 ↗
53. Study on the thermal stability of Al/NbTiSiN/NbTiSiON/SiO2 solar selective absorbing coating10.1016/j.solener.2015.06.021 ↗
54. Infrared and Raman study of WO3 tungsten trioxides and WO3, xH2O tungsten trioxide tydrates10.1016/0022-4596(87)90359-8 ↗
55. Enhancing spectrally selective response of W/WAlN/WAlON/Al2O3-based nanostructured multilayer absorber coating through graded optical constants10.1016/j.solmat.2017.11.013 ↗
56. Basu · 2011