Optical parameters of a novel competitive selective absorber for low temperature solar thermal applications
Source abstract
Abstract
Abstract Up to now many efforts have been put into environmentally friendly techniques for designing high quality selective absorbers to take advantage of the abundant and clean solar energy sources. In this paper a new selective absorber for low temperature thermal applications is presented. It is a multilayered absorber, specifically a three layer configuration, with only one layer of absorber material. It is composed of CuMnOx thin film and two consecutive antireflective coatings: FeMnCuOx and SiO2. The CuMnOx film and the FeMnCuOx antireflective layer were prepared from alcoholic solutions containing metal nitrates while the solution used to prepare the SiO2 coating was prepared from silicon alkoxides. The deposition of the three layers onto the aluminum substrate achieves solar absorptance values of 0.957 and thermal emittance values of 0.038 at 100 °C. In this way, it is obtained a very good selective absorber with three layers configuration by using a simple, reproducible and cost-effective method such as dip coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Solar thermal collectors and applications10.1016/j.pecs.2004.02.001 ↗
2. Köhl · 2004
3. Strategic Research Priorities for Solar Thermal Technology, European Technology Platform on Renewable Heating and Cooling, Manuscript finished. (〈http://www.rhcplatform.org/fileadmin/Publications/Solar_Thermal_SRP_single_page.pdf〉).
4. Degradation of selective absorber surfaces in solar thermal collectors-An EIS study10.1016/j.solmat.2016.10.015 ↗
5. Advanced procedure for assessment of the lifetime of solar absorber coatings10.1016/j.solmat.2004.01.041 ↗
6. Novel black selective coating for tubular solar absorbers based on a sol-gel method10.1016/j.solener.2013.05.009 ↗
7. G.A. Niklasson, C.G. Granqvist, Selectively solar-absorbing surface coatings: optical properties and degradation, Materials Science for Solar Energy Conversion Systems, Volume 1 in Renewable Energy, Pergamon (1991) 70–105.
8. Deposition and characterization of TiAlN/TiAlON/Si3N4 tandem absorbers prepared using reactive direct current magnetron sputtering10.1016/j.tsf.2007.10.113 ↗
9. Tailoring the physicochemical and mechanical properties of optical copper-cobalt oxide thin films through annealing treatment10.1016/j.surfcoat.2013.11.044 ↗
10. Aqueous solution-derived CuMn2O4 ceramic films for spectrally selective solar absorbers10.1016/j.ceramint.2016.09.062 ↗
11. Studies on acetone sensing characteristics of ZnO thin film prepared by sol-gel dip coating10.1016/j.jallcom.2016.02.222 ↗
12. Solar absorber coatings based on CoCuMnOx spinels prepared via the sol-gel process: structural and optical properties10.1016/S0927-0248(02)00457-9 ↗
13. Application of CuCoMnOx coat by sol gel technique on aluminum and copper substrates for solar absorber application10.1007/s11998-014-9592-9 ↗
14. Developments in the synthesis of flat plate solar selective absorber materials via sol-gel methods10.1016/j.rser.2014.04.062 ↗
15. Characterization of copper-manganese-oxide thin films deposited by dip-coating10.1016/j.solmat.2008.04.011 ↗
16. Spectrally selective absorber coating from transition metal complex for efficient photothermal conversion10.1007/s10853-013-7639-4 ↗
17. Durability tests and up-scaling of selective absorbers based on copper-manganese oxide deposited by dip-coating10.1016/j.solmat.2010.02.006 ↗
18. A. Morales, Process to deposit metal and metal oxide coatings, European Patent: EP1321539 (A3).
19. Solar thermal electric plants. Terminology. UNE 206009, 2013.
20. Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface. Designation: G 173 – 03.
21. The thickness of native oxides on aluminum alloys and single crystals10.1016/j.apsusc.2015.05.043 ↗
22. Preparation of selective absorbers based on CuMn spinels by dip-coating method10.1016/j.renene.2007.05.017 ↗
23. Optical, thermal and structural characteristics of carbon nanoparticles embedded in ZnO and NiO as selective solar absorbers10.1016/j.solmat.2008.04.023 ↗