journal article·2017-04

Efficiency enhancement of Cu2ZnSn(S,Se)4 solar cells by S-modified surface layer

Chung-Hao Cai, Shih-Yuan Wei, Wei-Chih Huang, Chia-Hao Hsu, Wei-Hao Ho, Chih-Huang Lai

Publisher page

Abstract

Abstract We demonstrate a simple approach to fabricate Cu 2 ZnSn(S, Se) 4 (CZTSSe) absorber with increased-sulfur content surface. It is well known that the problem of interface recombination in CZTSSe solar cells is the issue for further improving efficiency. The beneficial effects of surface sulfurization were reported in Cu(In, Ga)(S, Se) 2 solar cells. However, very limited works have been reported on the effects of surface sulfurization on CZTSSe solar cells, which is a critical factor to improve the surface and achieve higher efficiency. In this work, we fabricate the CZTSSe absorber by selenizing the sulfur-containing stacked precursors. The sulfur-modified surface is achieved by introducing H 2 S gas during cooling stage of the selenization process. The effects of surface sulfurization on composition, structure, morphology, and electric properties of CZTSSe are thoroughly investigated. The open circuit voltage can be increased significantly from 312 mV (without H 2 S) to 400 mV (with H 2 S) due to the increment of front surface bandgap and reduction of interface recombination. Surface localized electric properties are improved, and interface defect density is decreased due to surface passivation by using H 2 S gas. The efficiency of CZTSSe solar cell substantially increases from 5.01% (without H 2 S) to 7.38% (with H 2 S). The proposed approach can be easily applied to various CZTSSe processes to passivate the surface and form larger surface bandgap, leading to lower interface recombination, which paves a new avenue to further improve the CZTSSe efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Device characteristics of CZTSSe thin‐film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
2. H. Hiroi, N. Sakai, Y. Iwata, T. Kato, H. Sugimoto, Impact of Buffer Layer on Kesterite Solar Cells, in: Proceedings of the 42nd IEEE Photovolt. Spec. Conf., 2015, pp. 1–410.1109/PVSC.2015.7356415 ↗
3. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
4. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
5. Accelerated publication 16.4% total-area conversion efficiency thin-film polycrystalline MgF2/ZnO/CdS/Cu(In,Ga)Se2/Mo solar cell10.1002/pip.4670020404 ↗
6. M. Nakamura, Y. Chiba, S. Kijima, K. Horiguchi, Y. Yanagisawa, Y. Sawai, K. Ishikawa, H. Hakuma, Achievement of 17.5% Efficiency with 30x30cm2-Sized Cu(In,Ga)(Se,S)2 Submodules, in: Proceedings of the 38th IEEE Photovolt. Spec. Conf., 2012, pp. 001807–00181010.1109/PVSC.2012.6317944 ↗
7. Effects of Ga addition to CuInSe2 on its electronic, structural, and defect properties10.1063/1.121548 ↗
8. Gallium gradients in Cu(In,Ga)Se2 thin-film solar cells10.1002/pip.2485 ↗
9. Fabrication of pentanary Cu(InGa)(SeS)2 absorbers by selenization and sulfurization10.1016/j.solmat.2009.02.004 ↗
10. Solar Frontier, Solar Frontier Achieves World Record Thin-Film Solar Cell Efficiency: 22.3%, 2015, 〈http://www.solar-frontier.com/eng/news/2015/C051171.html〉.
11. M. Nakamura, Y. Kouji, R. Chiba, H. Hakuma, T. Kobayashi, T. Nakada, Achievement of 19.7% Efficiency with A Small-sized Cu(InGa)(SeS)2 Solar Cells Prepared by Sulfurization after Selenizaion Process with Zn-Based Buffer, in: Proceedings of the 39th IEEE Photovolt. Spec. Conf., 2013, pp. 0849–085210.1109/PVSC.2013.6744278 ↗
12. Modeling of the surface sulfurization of CIGSe-based solar cells10.1016/j.solener.2014.08.004 ↗
13. A new approach to high-efficiency solar cells by band gap grading in Cu(In,Ga)Se2 chalcopyrite semiconductors10.1016/S0927-0248(00)00274-9 ↗
14. Impacts of surface sulfurization on Cu(In1−x,Gax)Se2 thin-film solar cells10.1002/pip.2554 ↗
15. Band alignment at the Cu2ZnSn(SxSe1−x)4/CdS interface10.1063/1.3600776 ↗
16. Raman scattering quantitative analysis of the anion chemical composition in kesterite Cu2ZnSn(SxSe1−x)4 solid solutions10.1016/j.jallcom.2014.12.175 ↗
17. Multiwavelength excitation Raman scattering of Cu2ZnSn(SxSe1−x)4 (0≤x≤1) polycrystalline thin films: vibrational properties of sulfoselenide solid solutions10.1063/1.4891333 ↗
18. Band-gap-graded Cu2ZnSn(S1−x,Sex)4 solar cells fabricated by an ethanol-based10.1038/srep03069 ↗
19. Efficiency enhancement by adding SnS powder during selenization for Cu2ZnSn(S,Se)4 thin film solar cells10.1016/j.solmat.2015.10.037 ↗
20. Production technology for high-efficiency thin-film CIS-absorber formation10.1109/JPHOTOV.2014.2302235 ↗
21. Local built-in potential on grain boundary of Cu(In,Ga)Se2 thin films10.1063/1.1737796 ↗
22. Numerical simulation of carrier collection and recombination at grain boundaries in Cu(In,Ga)Se2 solar cells10.1063/1.2917293 ↗
23. direct evidence for a reduced density of deep level defects at grain boundaries of Cu(In,Ga)Se2 thin films10.1103/PhysRevLett.105.116802 ↗
24. Band tailing and efficiency limitation in kesterite solar cells10.1063/1.4820250 ↗
25. Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells10.1063/1.3522884 ↗
26. Electronic properties of CuGaSe2-based heterojunction solar cells. Part I. Transport analysis10.1063/1.371903 ↗
27. Device characteristics of a 10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell10.1002/pip.1160 ↗
28. Beyond 11% efficiency: characteristics of state-of-the-Art Cu2ZnSn(S,Se)4 solar cells10.1002/aenm.201200348 ↗
29. Distinguishing metastable changes in bulk CIGS defect densities from interface effects10.1016/S0040-6090(03)00189-5 ↗
30. Bulk and metastable defects in CuIn1−xGaxSe2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
31. The Role of Sulfur in Solution- Processed Cu2ZnSn(S,Se)4 and its effect on defect properties10.1002/adfm.201201732 ↗